04-18-2019, 06:13 PM | #183 |
Good Job Subaru!
Join Date: Mar 2016
Drives: '17 BRZ, '24 CX-50
Location: Toronto, Ontario, Canada
Posts: 349
Thanks: 144
Thanked 333 Times in 155 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
__________________
|
04-18-2019, 08:56 PM | #184 |
He's got this.
Join Date: Mar 2010
Drives: 50th Anni BRZ
Location: SoCal
Posts: 569
Thanks: 251
Thanked 247 Times in 129 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Have yet to get under my car so I have no clue, is the spot making contact with the header elevated or recessed? Kinda hard to tell in the pictures.
Sent from my iPhone using Tapatalk
__________________
Don't worry, I'm certified... promise.
|
04-19-2019, 07:59 AM | #185 |
Senior Member
Join Date: Jul 2015
Drives: '14 FRS TT5
Location: Columbus, OH
Posts: 228
Thanks: 140
Thanked 125 Times in 64 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
The spot where mine was touching was an elevated area. I used a deadblow and a 3/8 extension to direct the bending/denting and it worked like a charm. It didn't take much.
__________________
Follow my NASA TT5 build here: JHill Motorsports
|
04-20-2019, 12:02 PM | #186 | |
Good Job Subaru!
Join Date: Mar 2016
Drives: '17 BRZ, '24 CX-50
Location: Toronto, Ontario, Canada
Posts: 349
Thanks: 144
Thanked 333 Times in 155 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
JDL 4-2-1 EL header
Quote:
So, I think I may have a leak at the header which is causing this noise. It sounds like its extra thrummy exhaust sound coming from the front of the car (lol English); perhaps Touge Tuning didn't torque the header down on the gaskets properly? Or I could just be crazy. Upon cold starts and after getting under load a bit as well I can smell exhaust distinctly from the front of the vehicle. Given the holiday weekend, I won't have time to get back underneath the car and check until next weekend. Car seems to drive fine for now anyways. Another video here, you can hear it at first then as the car settles into idle there is a distinct tone change (the thrum goes away). EDIT: Switching to a Grimmspeed gasket between the header and overpipe fixed the issue. The graphite gasket that comes with the header is kinda junk.
__________________
Last edited by JBezugs; 06-09-2020 at 04:27 PM. |
|
04-21-2019, 09:16 AM | #187 |
Senior Member
Join Date: Oct 2016
Drives: 2016 Scion FRS / Chevy Colorado
Location: Ohio
Posts: 658
Thanks: 51
Thanked 564 Times in 314 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
If anyone is curious. Here’s how my setup sounds
Ignore the crappy driving [ame]https://m.youtube.com/watch?v=ZGExkADD_Co[/ame] Sent from my iPhone using Tapatalk
__________________
Kyle H. - #89 STX
|
04-21-2019, 10:27 AM | #188 |
Senior Member
Join Date: Apr 2018
Drives: 2018 BRZ tS
Location: Northern VA
Posts: 396
Thanks: 239
Thanked 232 Times in 125 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Sounds awesome! Unrelated questions: is that an app overlay you are running on your GoPro to get the info on the video? I'm trying to find something similar to that.
|
04-21-2019, 10:40 PM | #189 | |
Senior Member
Join Date: Oct 2016
Drives: 2016 Scion FRS / Chevy Colorado
Location: Ohio
Posts: 658
Thanks: 51
Thanked 564 Times in 314 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I’m using racecapture track mk2 and feeding the data into solostorm for analysis at autocross. You can just run the racecapture and use their overlays as well if you want. Sent from my iPhone using Tapatalk
__________________
Kyle H. - #89 STX
|
|
The Following User Says Thank You to M0nk3y For This Useful Post: | J1Avs (04-22-2019) |
04-22-2019, 04:53 AM | #190 |
Senior Member
Join Date: Oct 2012
Drives: UK GT86
Location: UK
Posts: 3,040
Thanks: 185
Thanked 1,631 Times in 1,112 Posts
Mentioned: 155 Post(s)
Tagged: 1 Thread(s)
|
__________________
.: Stealth 86 :.
Abbey Motorsport/K47 Tuned Sprintex 210 Supercharger Kodename 47 DJ: Soundcloud / Instagram / Facebook |
04-22-2019, 10:44 AM | #191 |
Senior Member
Join Date: Jul 2015
Drives: '14 FRS TT5
Location: Columbus, OH
Posts: 228
Thanks: 140
Thanked 125 Times in 64 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
For autox, Solostorm is the best for quick analysis throughout the day and deep-dive analysis later. Granted it is an expensive app (~$200) and buggy, it is the best for autox. And yes, you can overlay data on videos.
For full track, there are a ton of options, but I personally like RaceChrono. Their in-app data analysis is the best and easiest to use from what I've seen, and you can export the data for deep-dive analysis in Track Addict or other PC-based applications. You can also overlay data (from GPS, OBDII, etc) on videos from the internal camera and/or multiple go-pros. There is a free version and the paid version is only around $20-$25. Here is an example: [ame]https://www.youtube.com/watch?v=Eenjp5iz_08[/ame] Also, for more sounds of the JDL, I remembered to connect my external mic in this video: https://www.instagram.com/p/Bwc-E6ljCK9/
__________________
Follow my NASA TT5 build here: JHill Motorsports
|
04-24-2019, 10:33 AM | #192 |
Senior Member
Join Date: Jan 2014
Drives: 2013 Raven FR-S
Location: Nashville
Posts: 775
Thanks: 968
Thanked 213 Times in 136 Posts
Mentioned: 3 Post(s)
Tagged: 2 Thread(s)
|
Has anyone done a dyno with E85 yet? Would be curious to see how this one handles an E85 tune compared to the UEL.
|
05-03-2019, 09:25 PM | #193 |
Good Job Subaru!
Join Date: Mar 2016
Drives: '17 BRZ, '24 CX-50
Location: Toronto, Ontario, Canada
Posts: 349
Thanks: 144
Thanked 333 Times in 155 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Picked up a cheap lav off amazon just so I could do this for you guys. In-car DSLR mounting solution will need to get better to curb the shakies, but the audio from that lav mic on the rear bumper? Ace (heh).
JDL 4-2-1 header with the Invidia R400 catback, stock overpipe and front pipe.
__________________
Last edited by JBezugs; 06-09-2020 at 04:26 PM. |
05-03-2019, 10:54 PM | #194 | |
Senior Member
Join Date: May 2012
Drives: 2013 Series 10 6MT FR-S
Location: Moreno Valley, CA
Posts: 5,553
Thanks: 2,008
Thanked 2,032 Times in 1,469 Posts
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Sent from my ONEPLUS A5010 using Tapatalk
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85 RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's |
|
05-03-2019, 11:24 PM | #195 | |
Senior Member
Join Date: Jul 2015
Drives: '14 FRS TT5
Location: Columbus, OH
Posts: 228
Thanks: 140
Thanked 125 Times in 64 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Not to one up you or anything but I used to use a cheap lavalier mic. It always sounded muffled with the stock header/catback setup. I think it was exceeding the frequency of the microphone. So I stepped up to the Olympus ME-51S Stereo Microphone I actually just keep it tied down in the rear trunk area near the back/bumper and I have an aux extension cord running to the main cabin that I plug into my gopro. You've probably seen this clip before, but this is what it sounds like with the external Olympus mic plugged in: https://www.instagram.com/p/Bwc-E6ljCK9/ Regardless, any external mic sounds better than most on-camera mics! In other news, Bill at Delicious Tuning made some tweaks to my tune...it feels much stronger now! I'm not sure if it's placebo effect, but I will have it on the dyno again soon to confirm the power gains.
__________________
Follow my NASA TT5 build here: JHill Motorsports
|
|
05-06-2019, 09:56 AM | #196 | |
Good Job Subaru!
Join Date: Mar 2016
Drives: '17 BRZ, '24 CX-50
Location: Toronto, Ontario, Canada
Posts: 349
Thanks: 144
Thanked 333 Times in 155 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Quote:
What makes this cheap mic bearable even when outside on the rear bumper is that I can adjust the microphone sensitivity on the input of my DSLR as to not sail it into clipping under WOT. In that video it was just starting to clip at the top RPM range, so next time I record I can knock down the sensitivity by one more notch and I'll be good to go. Glad to hear your tune is consistently improving! I look forward to seeing the numbers.
__________________
|
|
The Following User Says Thank You to JBezugs For This Useful Post: | TMF (05-06-2019) |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
JDL UEL header/Nameless header-back exhaust (Atlanta area) | carbon_raven | Engine, Exhaust, Bolt-Ons | 16 | 05-09-2015 02:26 AM |
Who has Open Flash Header (or aftermarket UEL header) in the GTA with stock exhaust? | alanhung85 | CANADA | 6 | 10-21-2014 10:41 PM |
RevWorks UEL Header + Nameless Catted Front Pipe VS Stock Gutted Header + FP | NickFRS | Engine, Exhaust, Transmission | 44 | 04-19-2014 05:42 PM |
Top Gear Solutions| HKS Header |Borla EL & UEL Headers| Agency Power Header| + MORE! | TopGearSolutions | Engine, Exhaust, Bolt-Ons | 82 | 04-14-2014 08:16 PM |
Gutted cat stock header vs aftermarket catless header NA application | stevo585 | Engine, Exhaust, Transmission | 8 | 04-04-2014 04:12 PM |