WHAT DID YOU DO TO YOUR BRZ TODAY? - Page 1262 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

BigTuna · 04-11-2019, 09:15 AM

Hotchkis front stabilizer bar.

Anyone else experience very little to no clearance between the endlink stud and the control arm when using an adjustable bar? My stud is juuuuust kissing the LCA. Not enough to make a noise, but just enough to make a slight mark. I'm not too worried about it, just wondered.

Extreme86 · 04-11-2019, 05:43 PM

Took my BRZ in Monday for the dreaded WTY84 FA20 valve spring recall and picked it up today. Had the dealer install new spark plugs, V-belt, Clutch, pressure plate, flywheel and throw-out bearing just because. Got a 15% discount on parts and labor (1 hour) for the clutch job. Master Mechanic (Joe) kept me informed during the procedure. He did a great job and car runs great...so far - knock on wood! Thanks Joe @ North Park Dominion Subaru!!!

BRZyJ · 04-11-2019, 10:26 PM

Finally switched out the embarrassing wusshorns. Used the horn for like the third time ever a few days ago and thought "allright...don't need to hear that again"...
.

j3rf · 04-11-2019, 10:54 PM

FINALLY removed my clutch pedal spring. It feels so much better now.

Also installed some new Hankook Ventus V12 Evo2 tires. Primacys were at the end of their life for sure.

norcalpb · 04-12-2019, 12:44 AM

Quote:

Originally Posted by BigTuna

Hotchkis front stabilizer bar.

Anyone else experience very little to no clearance between the endlink stud and the control arm when using an adjustable bar? My stud is juuuuust kissing the LCA. Not enough to make a noise, but just enough to make a slight mark. I'm not too worried about it, just wondered.

With the car in the air? Or on the ground?

BigTuna · 04-12-2019, 10:22 AM

Quote:

Originally Posted by norcalpb

With the car in the air? Or on the ground?

In the air it's really close, I can't get a great look at in on the ground, but it is leaving a bot of a witness mark so the link stud touches just a hair.

ghst86 · 04-15-2019, 03:21 PM

Checked my damper settings on my coilovers, and found they were all adjusted to something different... any idea what could have caused this? I originally had them at 7 clicks from full hard, as per Tein's recommendations, but upon checking, they were all over the place (Front - 5 & 2, Rears - 7 & 14). Maybe an oversight I made or something. For what it's worth, I have the subaru trunk liner which could have slid around against the damper knobs, so I cut notches out this morning.

norcalpb · 04-15-2019, 05:13 PM

Quote:

Originally Posted by BigTuna

In the air it's really close, I can't get a great look at in on the ground, but it is leaving a bot of a witness mark so the link stud touches just a hair.

The bar will normally touch when you raise the car up. You should turn the wheels to the side with the car on the ground and examine how close the bar really is.

_keepkushin_ · 04-17-2019, 10:10 PM

Well my accessories belt snapped while driving on the freeway

AJ32162 · 04-17-2019, 10:17 PM

Quote:

Originally Posted by _keepkushin_

Well my accessories belt snapped while driving on the freeway

What were your total miles as shown on the odometer?

_keepkushin_ · 04-17-2019, 10:39 PM

Quote:

Originally Posted by AJ32162

What were your total miles as shown on the odometer?

Im not sure maybe close to 80k

_keepkushin_ · 04-17-2019, 10:47 PM

Quote:

Originally Posted by AJ32162

What were your total miles as shown on the odometer?

80156

Breadman · 04-21-2019, 09:25 PM

did my semi yearly interior clean. took everything out, threw out anything i didnt need, vacuumed everything, wiped everything down with armor all, sprayed off all the pollen, and rainxed all the windows and mirrors. also cleaned up the grease in some major parts under the hood, and replaced the cabin filter.

HaXx · 04-21-2019, 10:00 PM

Put on brand new ts 10 wheels today, wish I new how to upload pics, it looks tit

04-11-2019, 09:15 AM	#17655
BigTuna Senior Member Join Date: Jun 2015 Drives: 2013 WRB BRZ Location: Ohio Posts: 672 Thanks: 258 Thanked 477 Times in 275 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Hotchkis front stabilizer bar. Anyone else experience very little to no clearance between the endlink stud and the control arm when using an adjustable bar? My stud is juuuuust kissing the LCA. Not enough to make a noise, but just enough to make a slight mark. I'm not too worried about it, just wondered. __________________ 2013 WRB "Build" Thread

04-11-2019, 10:54 PM	#17658
j3rf Senior Member Join Date: May 2015 Drives: 2013 BRZ Location: Cincinnati Posts: 105 Thanks: 97 Thanked 46 Times in 32 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	FINALLY removed my clutch pedal spring. It feels so much better now. Also installed some new Hankook Ventus V12 Evo2 tires. Primacys were at the end of their life for sure. __________________ 13 BRZ Limited 6MT Lightning Red

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 01:40 PM
Got my new FR-S today.	Boosted2.0	Scion FR-S / Toyota 86 GT86 General Forum	51	06-03-2012 11:35 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 02:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 11:19 PM
sat in a BRZ today	NESW20	BRZ First-Gen (2012+) — General Topics	8	03-31-2012 09:53 AM

04-15-2019, 03:21 PM	#17661
ghst86 Member Join Date: Sep 2018 Drives: 2016 BRZ Limited Location: Norther California Posts: 33 Thanks: 5 Thanked 16 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Checked my damper settings on my coilovers, and found they were all adjusted to something different... any idea what could have caused this? I originally had them at 7 clicks from full hard, as per Tein's recommendations, but upon checking, they were all over the place (Front - 5 & 2, Rears - 7 & 14). Maybe an oversight I made or something. For what it's worth, I have the subaru trunk liner which could have slid around against the damper knobs, so I cut notches out this morning.

04-21-2019, 09:25 PM	#17667
Breadman Senior Member Join Date: Jul 2017 Drives: 2017 BRZ w/PP Location: Pa Posts: 1,027 Thanks: 51 Thanked 302 Times in 225 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	did my semi yearly interior clean. took everything out, threw out anything i didnt need, vacuumed everything, wiped everything down with armor all, sprayed off all the pollen, and rainxed all the windows and mirrors. also cleaned up the grease in some major parts under the hood, and replaced the cabin filter.

04-21-2019, 10:00 PM	#17668
HaXx Member Join Date: Dec 2017 Drives: jrsc_brz Location: boston Posts: 965 Thanks: 726 Thanked 676 Times in 337 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Put on brand new ts 10 wheels today, wish I new how to upload pics, it looks tit

User Name		Remember Me?
Password