Racer X Fabrication air intake design and development! - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

mad_sb · 01-07-2014, 11:51 AM

Quote:

Originally Posted by jamesm

you're going to need to scale your maf when you install an intake regardless of whether it explicitly altered the diameter or not. hell, you should probably scale your maf even if you haven't change anything.

but it would be of little benefit for them to provide base numbers, as it's so simple to do and you'd end up fine tuning it regardless even if they do provide them. you could just as easily do the math yourself and start from there, or just start with the stock scaling and tune the thing. there will not be a case in which you just plug in numbers from a vendor and your maf is perfect.

Agree fully, however a lot of folks are scared of maf scaling. Admittedly it's more involved on this platform due to the dual fuel system. Perrin has a csv maf table on their site that is "corrected" for the 3" intake they offer. just thought that would be an option for those that don't want or know how to scale the maf

Turdinator · 03-10-2014, 11:14 PM

@racerx1715 any further news or development on this?

Jeff@Racer X Fab · 03-11-2014, 11:41 PM

Quote:

Originally Posted by Turdinator

@racerx1715 any further news or development on this?

Now that we have wrapped up the oil pan, we will be moving back to the air intake and then on to the intake manifold. Expect some updates soon!!

Lonewolf · 06-15-2014, 11:24 PM

Quote:

Originally Posted by Fear

Intake manifold ... GO!

Seriously!

fika84 · 01-01-2019, 07:11 PM

Bumpin this up! I'm signed up for updates on this bad boy!

http://racerxfabrication.com/frs-brz/intake-manifold
@racerx1715 can you give us any more information??

SuperTom · 01-01-2019, 10:06 PM

in for updates!

PuslarBrrrz · 01-01-2019, 10:57 PM

Got excited for a second.

Lantanafrs2 · 01-01-2019, 10:58 PM

Quote:

Originally Posted by SuperTom

in for updates!

Good na video. Toda 2.3 kit good for 15 hp.

Dr. BRZ · 01-02-2019, 03:27 AM

Quote:

Originally Posted by SuperTom

in for updates!

I need you to be the Guinea pig and get the revolution intake and bigger throttle body and dyno it so all of us can see the numbers and i can purchase mine later lol

Captain Snooze · 01-03-2019, 04:56 AM

Quote:

Originally Posted by fika84

Bumpin this up! I'm signed up for updates on this bad boy!

http://racerxfabrication.com/frs-brz/intake-manifold
@racerx1715 can you give us any more information??

From 4 & 1/2 years ago?
Why don't you email/phone RacerX?
racerx1715's last post was 10-18-2015.
Jeff@Racer X Fab's last post was 03-22-2018

fika84 · 01-03-2019, 11:25 AM

Quote:

Originally Posted by Captain Snooze

From 4 & 1/2 years ago?
Why don't you email/phone RacerX?
racerx1715's last post was 10-18-2015.
Jeff@Racer X Fab's last post was 03-22-2018

If they don't respond, they don't respond.. I'm not too worried about it.. just wanted to bring attention to it is all.

x808drifter · 01-03-2019, 12:37 PM

Quote:

Originally Posted by fika84

If they don't respond, they don't respond.. I'm not too worried about it.. just wanted to bring attention to it is all.

PuslarBrrrz · 01-03-2019, 01:28 PM

It wouldn't be a bad idea to bug them on their social media pages too so they know people are interested.

SuperTom · 01-03-2019, 01:45 PM

Quote:

Originally Posted by Dr. BRZ

I need you to be the Guinea pig and get the revolution intake and bigger throttle body and dyno it so all of us can see the numbers and i can purchase mine later lol

I do want the revolution intake going to hard to part with that kind of money for an intake tube. Its basically like the Vararam intake I have on my C5 that was only ~$300.

01-01-2019, 10:06 PM	#20
SuperTom Senior Member Join Date: Feb 2014 Drives: C5, GT-86, '24 Colorado TrailBoss Location: New Castle DE Posts: 1,576 Thanks: 1,682 Thanked 1,049 Times in 582 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	in for updates! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racer X Fabrication suspension parts, and development	Jeff@Racer X Fab	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	134	09-01-2016 06:02 AM
Racer X Fabrication Suspension group buy: UCA, Rear LCA, Front LCA and more!!	Jeff@Racer X Fab	Groupbuys	74	06-23-2014 10:08 AM
Racer X Fabrication: Upper rear control arms, in stock/ready to ship!!	Jeff@Racer X Fab	Brakes, Suspension, Chassis	25	01-24-2014 12:42 PM
Racer X Fabrication, New vendor intro	Jeff@Racer X Fab	Announcements, Contests, Giveaways	0	03-12-2013 12:50 PM
Freed Engineering custom metal fabrication and parts development	bFreed	Announcements, Contests, Giveaways	23	03-24-2012 04:35 AM

01-01-2019, 10:57 PM	#21
PuslarBrrrz Senior Member Join Date: Jun 2017 Drives: 2013 BRZ Location: Dayton, OH Posts: 103 Thanks: 37 Thanked 61 Times in 33 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Got excited for a second.

01-03-2019, 01:28 PM	#27
PuslarBrrrz Senior Member Join Date: Jun 2017 Drives: 2013 BRZ Location: Dayton, OH Posts: 103 Thanks: 37 Thanked 61 Times in 33 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	It wouldn't be a bad idea to bug them on their social media pages too so they know people are interested.

User Name		Remember Me?
Password