WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1403 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FRShFA20 · 09-22-2018, 11:52 PM

Dialed in the tune for 6, 8, 10, and 12 pound boost maps.

Sent from my SM-G935P using Tapatalk

jflogerzi · 09-23-2018, 05:42 PM

Washed the car today. Added my new Tom's red usdm tails, a trd style spolier from ikon Motorsports, and a beatsonic shark fin. Really think everything came out good.

wired · 09-23-2018, 05:47 PM

My car broke down today

Engine began making a rougher, grindy noise all of a sudden. Within a couple of seconds, as I was already slowing down, it turned off. Temp needle shot off the roof. All fluids were at normal levels. Engine is now dead.

Waiting for tow...

Enkrow · 09-23-2018, 05:49 PM

Quote:

Originally Posted by jflogerzi

Washed the car today. Added my new Tom's red usdm tails, a trd style spolier from ikon Motorsports, and a beatsonic shark fin. Really think everything came out good.

Looks classy!

Quote:

Originally Posted by wired

My car broke down today

Engine began making a rougher, grindy noise all of a sudden. Within a couple of seconds, as I was already slowing down, it turned off. Temp needle shot off the roof. All fluids were at normal levels. Engine is now dead.

Waiting for tow...

Ouch, that sucks...
How many miles were on the clock?

Qwimby1 · 09-23-2018, 06:09 PM

Quote:

Originally Posted by N1rve

Don't take the center nut out all the way, just enough to pull on it to release it. That's about it?

Got the wheel mounted today. I think it'll be a big improvement. On my way to Autozone for some Lexol to treat it.

wired · 09-23-2018, 07:21 PM

Quote:

Originally Posted by Enkrow

Ouch, that sucks...
How many miles were on the clock?

29k

N1rve · 09-23-2018, 07:40 PM

Quote:

Originally Posted by Qwimby1

Got the wheel mounted today. I think it'll be a big improvement. On my way to Autozone for some Lexol to treat it.

Pics or it didn't happen

notout86 · 09-23-2018, 09:03 PM

Quote:

Originally Posted by FRShFA20

Had a little set back on Saturday going from a metric FRS to an English Wilwood bbk. This and a couple of other small supply issues pushed the completion date to next Thursday. Other than that, the parts are finding their way in.

Sent from my SM-G935P using Tapatalk

You might like to heat-shield your coolant overflow bottle to reduce evaporation.

FRS13_ · 09-23-2018, 09:26 PM

Finally installed my new Flex Z. And the exhaust I bought from @armyoffoo

Now just needs a good wash.

Sent from my SM-G892A using Tapatalk

FRShFA20 · 09-23-2018, 09:49 PM

Quote:

Originally Posted by notout86

You might like to heat-shield your coolant overflow bottle to reduce evaporation.

I'll look into that. Thanks. Even with all the ceramic, tape, and blanket, the engine bay still gets hot.

Sent from my SM-G935P using Tapatalk

Enkrow · 09-23-2018, 10:18 PM

Quote:

Originally Posted by wired

29k

That sounds pretty new! I hope you can get it repaired under warranty.

Face_Plant · 09-24-2018, 06:38 PM

Today I installed the one piece center dashboard trim thingy (not sure what the proper name is) from the 2017+ 86/BRZ. It's a huge upgrade over the ugly two piece plastic trim that my car came with.

Leonardo · 09-24-2018, 07:06 PM

Ordered more spacers to add to my collection. Now I have 5mm, 10mm, 12mm, 15mm, and 25mm.

I'm going to move the 12mm I have on the rear, to the front. And put my new 15mm on the rear. Essentially making the front 18x9 +30 and the rear 18x9 +27. Should fit perfect then...

Pics... Soon.

humfrz · 09-24-2018, 08:53 PM

Quote:

Originally Posted by Leonardo

Ordered more spacers to add to my collection. Now I have 5mm, 10mm, 12mm, 15mm, and 25mm.

I'm going to move the 12mm I have on the rear, to the front. And put my new 15mm on the rear. Essentially making the front 18x9 +30 and the rear 18x9 +27. Should fit perfect then...

Pics... Soon.

Why don't you post before and after pictures and see if we can guess which is which -

(jest ah messen wich ya -

)

humfrz

09-23-2018, 05:47 PM	#19631
wired Member Join Date: Feb 2015 Drives: Scion FR-S 2015 Location: Sunnyvale Posts: 34 Thanks: 7 Thanked 11 Times in 9 Posts Mentioned: 0 Post(s)	My car broke down today Engine began making a rougher, grindy noise all of a sudden. Within a couple of seconds, as I was already slowing down, it turned off. Temp needle shot off the roof. All fluids were at normal levels. Engine is now dead. Waiting for tow... __________________

09-24-2018, 07:06 PM	#19641
Leonardo Country Boy 4 Life Join Date: Jul 2012 Drives: 19' & 06' Ridgelines, 13' FR-S Location: EUGENE Posts: 5,228 Thanks: 6,719 Thanked 5,293 Times in 2,720 Posts Mentioned: 47 Post(s)	Ordered more spacers to add to my collection. Now I have 5mm, 10mm, 12mm, 15mm, and 25mm. I'm going to move the 12mm I have on the rear, to the front. And put my new 15mm on the rear. Essentially making the front 18x9 +30 and the rear 18x9 +27. Should fit perfect then... Pics... Soon. __________________ I LIKE TIRES!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 04:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 06:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 10:19 PM

09-23-2018, 09:26 PM	#19637
FRS13_ Senior Member Join Date: Oct 2016 Drives: 2013 Scion FRS 6-speed Location: Rockwall, TX Posts: 157 Thanks: 97 Thanked 74 Times in 48 Posts Mentioned: 2 Post(s)	Finally installed my new Flex Z. And the exhaust I bought from @armyoffoo Now just needs a good wash. Sent from my SM-G892A using Tapatalk

User Name		Remember Me?
Password