Learning manual, stalled so many times - Page 9 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Chikna · 09-06-2018, 03:42 PM

Why is it jerking when shift change from 1st to 2nd and bit on 3rd after that smooth?

Tcoat · 09-06-2018, 03:48 PM

Quote:

Originally Posted by Chikna

Why is it jerking when shift change from 1st to 2nd and bit on 3rd after that smooth?

Lower and shorter gears have less margin for error. Just keep practicing.

spike021 · 09-06-2018, 04:00 PM

Quote:

Originally Posted by Chikna

Why is it jerking when shift change from 1st to 2nd and bit on 3rd after that smooth?

From what you've been saying I think you're expecting that driving as/nearly as smoothly as an automatic will happen sooner than later.

It'll happen, but it's just going to take time and practice.

I'm about 18 months into driving manual and I still occasionally get jerking during that gear change/shift. It just happens. But over time you're going to learn how to transition much more smoothly.

So, just be patient.

Tcoat · 09-06-2018, 04:07 PM

Quote:

Originally Posted by spike021

From what you've been saying I think you're expecting that driving as/nearly as smoothly as an automatic will happen sooner than later.

It'll happen, but it's just going to take time and practice.

I'm about 18 months into driving manual and I still occasionally get jerking during that gear change/shift. It just happens. But over time you're going to learn how to transition much more smoothly.

So, just be patient.

I am 540 months into MT and still manage to screw up a shift every now and then. Still waiting for perfection.

extrashaky · 09-06-2018, 04:10 PM

I never make a mistake, and every shift I make is perfect. That's because I don't dig my heel into the floor.

ermax · 09-06-2018, 04:11 PM

Quote:

Originally Posted by extrashaky

I never make a mistake, and every shift I make is perfect. That's because I don't dig my heel into the floor.

Extra dampening helps too I am sure.

Tcoat · 09-06-2018, 04:15 PM

Quote:

Originally Posted by extrashaky

I never make a mistake, and every shift I make is perfect. That's because I don't dig my heel into the floor.

de·lu·sion·al
dəˈlo͞oZH(ə)nəl/
adjective
adjective: delusional

characterized by or holding idiosyncratic beliefs or impressions that are contradicted by reality or rational argument, typically as a symptom of mental disorder.
"hospitalization for schizophrenia and delusional paranoia"
- based on or having faulty judgment; mistaken.
  "their delusional belief in the project's merits never wavers"

Yoshoobaroo · 09-06-2018, 04:33 PM

Quote:

Originally Posted by extrashaky

I never make a mistake, and every shift I make is perfect. That's because I don't dig my heel into the floor.

We know

Sapphireho · 09-06-2018, 04:41 PM

Quote:

Originally Posted by Tcoat

I am 540 months into MT and still manage to screw up a shift every now and then. Still waiting for perfection.

I only screw up when I think about it.

Sasquachulator · 09-06-2018, 05:45 PM

Quote:

Originally Posted by Tcoat

I am 540 months into MT and still manage to screw up a shift every now and then. Still waiting for perfection.

im ultra perfect smooth shifts!!!1

But then I learned to drive stick on an even peakier engine with short gearing (Toyota 2zz-ge + C60 6 speed manual)

Ok im probably not perfect, but I can adjust my timing to find that smooth shift :p

Tcoat · 09-06-2018, 06:14 PM

Quote:

Originally Posted by Sasquachulator

im ultra perfect smooth shifts!!!1

But then I learned to drive stick on an even peakier engine with short gearing (Toyota 2zz-ge + C60 6 speed manual)

Ok im probably not perfect, but I can adjust my timing to find that smooth shift :p

99.99999996% of my shifts are good but every once in a while for whatever reason...

n0thing · 09-06-2018, 08:00 PM

It's harder to drive smoothly with A/C on.

Chikna · 09-06-2018, 08:32 PM

Quote:

Originally Posted by n0thing

It's harder to drive smoothly with A/C on.

I agree, I turn off while shifting until 6th gear, then turn on A/C, I sweat a lot by then.

Yoshoobaroo · 09-06-2018, 10:00 PM

Quote:

Originally Posted by Chikna

I agree, I turn off while shifting until 6th gear, then turn on A/C, I sweat a lot by then.

Quote:

Originally Posted by n0thing

It's harder to drive smoothly with A/C on.

You guys are kidding right? Modern AC compressors are very low-drag. This isn't a Geo Metro.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine Stalled While In Motion, Won't Fire Up	Borchert97	Issues \| Warranty \| Recalls / TSB	29	09-05-2017 07:37 PM
Stalled while driving	KDad2	Issues \| Warranty \| Recalls / TSB	18	05-23-2016 01:30 PM
Learning about cars.	Zoh	BRZ First-Gen (2012+) — General Topics	66	01-17-2015 02:49 PM
POST YOUR 1/4 MILE TIMES Quarter mile times	NYCsubaruBRZ	Tracking / Autocross / HPDE / Drifting	1	02-04-2014 06:59 AM
Forum seems to have stalled...	Dimman	Scion FR-S / Toyota 86 GT86 General Forum	27	07-23-2010 05:08 AM

09-06-2018, 03:42 PM	#113
Chikna Senior Member Join Date: Jul 2018 Drives: 2018 BRZ TS 244/500 Location: Houston Posts: 194 Thanks: 8 Thanked 43 Times in 33 Posts Mentioned: 0 Post(s)	Why is it jerking when shift change from 1st to 2nd and bit on 3rd after that smooth?

09-06-2018, 04:10 PM	#117
extrashaky Senior Member Join Date: Mar 2014 Drives: 2014 BRZ Limited Location: USA Posts: 4,046 Thanks: 1,100 Thanked 5,620 Times in 2,267 Posts Mentioned: 55 Post(s)	I never make a mistake, and every shift I make is perfect. That's because I don't dig my heel into the floor.

09-06-2018, 08:00 PM	#124
n0thing Senior Member Join Date: Jan 2014 Drives: Subaru BRZ Location: Markham Posts: 394 Thanks: 48 Thanked 90 Times in 53 Posts Mentioned: 6 Post(s)	It's harder to drive smoothly with A/C on.

User Name		Remember Me?
Password