The Drifting Thread - Page 102 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

cheeseburger · 08-10-2018, 09:25 AM

Quote:

Originally Posted by Trust86

Is it the 3.91?

3.909 Lol same difference

Kouki86 · 08-10-2018, 12:23 PM

Quote:

Originally Posted by cheeseburger

At some point today I’ll get something posted up.

Awesome, thanks! Would be a huge help to some of the stance guys too. The stock diff shits the bed hard whenever I 3 wheel going into a steep driveway.

cheeseburger · 08-10-2018, 02:04 PM

Here ya go boys

https://www.ft86club.com/forums/show...13#post3120113

Jtempleton · 08-12-2018, 11:47 AM

Next drift event at Piedmont dragway in Greensboro NC.
https://m.facebook.com/Piedmontdrift...ernal&mt_nav=1

6-Shift · 08-21-2018, 09:41 PM

Great write up @cheeseburger ! I think that swap is going to become super popular as people start picking these cars up cheap.

cheeseburger · 08-22-2018, 12:08 AM

Quote:

Originally Posted by 6-Shift

Great write up @cheeseburger ! I think that swap is going to become super popular as people start picking these cars up cheap.

Thanks man! I think you’re right. Once theses start popping up sub 10k. It will open the door for a lot people to really go nuts with the platform

elekidcircus · 12-21-2018, 06:40 AM

Finally got to learning this summer up until last weekend. Had some struggles the first few events not knowing a thing. Also it can be hard at times trying to learn when you have to wait in long lines trying to get a lap
Only damage the car took was a few scratches and a bent tierod

Sent from my SM-G955U using Tapatalk

circuithero · 02-22-2019, 01:42 PM

Where do you guys go for your drifting fix online? I used to really enjoy peoples progress and development of this platform but this thread is dead more or less.

I watch FormulaD on youtube and go read up the driftworks forum every once in a while. I am familiar with the drifting subreddit, too quiet for me. Any active drifting forums with build and technical sub forums?

I would appreciate any referrals to get my fix

ka-titties · 02-22-2019, 03:56 PM

Quote:

Originally Posted by circuithero

Where do you guys go for your drifting fix online? I used to really enjoy peoples progress and development of this platform but this thread is dead more or less.

I watch FormulaD on youtube and go read up the driftworks forum every once in a while. I am familiar with the drifting subreddit, too quiet for me. Any active drifting forums with build and technical sub forums?

I would appreciate any referrals to get my fix

Instagram, honestly.

Other than that, there's an awesome channel on YouTube called Edge of Traction TV that plays 24/7 drifting: https://www.youtube.com/channel/UCbk...Z4ZP3K1R9r63OQ

circuithero · 02-25-2019, 01:28 PM

Quote:

Originally Posted by ka-titties

Instagram, honestly.

Other than that, there's an awesome channel on YouTube called Edge of Traction TV that plays 24/7 drifting: https://www.youtube.com/channel/UCbk...Z4ZP3K1R9r63OQ

Cool, i'll check it out, thanks!

JoeBro · 03-19-2019, 05:01 PM

Quote:

Originally Posted by circuithero

Where do you guys go for your drifting fix online? I used to really enjoy peoples progress and development of this platform but this thread is dead more or less.

I watch FormulaD on youtube and go read up the driftworks forum every once in a while. I am familiar with the drifting subreddit, too quiet for me. Any active drifting forums with build and technical sub forums?

I would appreciate any referrals to get my fix

Seems to be there is a much more active facebook group for our cars. If you are on facebook, look up GT86/ BRZ/ FRS DRIFT.

Boomerang · 03-23-2019, 04:48 AM

So just finished reading the 102 pages of this thread, now crosseyed..

Got a drift day on the track coming up and hoping some of you can clarify;

1. What is the best and most effective way for drifting to disable the nannies?
a. Pull the ABS fuse-only
b. Pull the ABS fuse and do the pedal dance
c. Just do the pedal dance
d. Pull the ABS fuse and do the 3 second push on the traction button

2. If I install the inner tie rods for more angle, will an alignment be needed?

Cheers!

elekidcircus · 03-23-2019, 07:38 PM

Quote:

Originally Posted by Boomerang

So just finished reading the 102 pages of this thread, now crosseyed..

Got a drift day on the track coming up and hoping some of you can clarify;

1. What is the best and most effective way for drifting to disable the nannies?
a. Pull the ABS fuse-only
b. Pull the ABS fuse and do the pedal dance
c. Just do the pedal dance
d. Pull the ABS fuse and do the 3 second push on the traction button

2. If I install the inner tie rods for more angle, will an alignment be needed?

Cheers!

Just pull the fuse and youre good as far as I can tell cos thats what I did
You will need an alignment after
Sent from my SM-G955U using Tapatalk

WORKS · 07-15-2019, 04:26 PM

One of our drivers, Adam - Doing some skidpad testing with the WORKS CARB exempt turbo shop car!

[ame]https://www.youtube.com/watch?v=37FTlR9Ph2Q[/ame]

08-10-2018, 02:04 PM	#1417
cheeseburger IG: @_southwell_86 Join Date: Nov 2015 Drives: Rwd Prius. Location: orange county new york Posts: 118 Thanks: 6 Thanked 35 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Here ya go boys https://www.ft86club.com/forums/show...13#post3120113 __________________ 2013 frs I 🖤 drifting. https://youtu.be/XW5XBQuLDUM IG: @_southwell_86

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is there a thread for 'people doing stupid things in their brand new car' thread?	Symbiont	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	36	02-18-2013 01:24 PM
BRZ Drifting.	Hunter	BRZ Photos, Videos, Wallpapers, Gallery Forum	7	09-20-2012 09:57 AM
So Cal drifting	Thefear13	Scion FR-S / Toyota 86 GT86 General Forum	0	08-10-2012 05:53 PM
REAL drifting thread	TylerLieberman	Off-Topic Lounge [WARNING: NO POLITICS]	17	02-28-2012 05:20 PM
FT-86 II (RC) Drifting	ft86cbx	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	8	11-11-2011 03:02 AM

08-12-2018, 11:47 AM	#1418
Jtempleton Junior Member Join Date: Apr 2016 Drives: Silver 2015 Frs Location: Nc Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Next drift event at Piedmont dragway in Greensboro NC. https://m.facebook.com/Piedmontdrift...ernal&mt_nav=1

12-21-2018, 06:40 AM	#1421
elekidcircus Member Join Date: Aug 2014 Drives: 13 Scion FRS Location: Here Posts: 29 Thanks: 11 Thanked 13 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	Finally got to learning this summer up until last weekend. Had some struggles the first few events not knowing a thing. Also it can be hard at times trying to learn when you have to wait in long lines trying to get a lap Only damage the car took was a few scratches and a bent tierod Sent from my SM-G955U using Tapatalk

02-22-2019, 01:42 PM	#1422
circuithero Member Join Date: Jan 2013 Drives: 2006 Infiniti M45S Location: BC, Canada Posts: 66 Thanks: 10 Thanked 95 Times in 26 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Where do you guys go for your drifting fix online? I used to really enjoy peoples progress and development of this platform but this thread is dead more or less. I watch FormulaD on youtube and go read up the driftworks forum every once in a while. I am familiar with the drifting subreddit, too quiet for me. Any active drifting forums with build and technical sub forums? I would appreciate any referrals to get my fix

03-23-2019, 04:48 AM	#1426
Boomerang 86 Join Date: May 2016 Drives: 2015 Toyota GT86 MT UEL E85 RSR CWP Location: Perth, Western Australia Posts: 3,293 Thanks: 3,553 Thanked 4,850 Times in 2,166 Posts Mentioned: 28 Post(s) Tagged: 0 Thread(s)	So just finished reading the 102 pages of this thread, now crosseyed.. Got a drift day on the track coming up and hoping some of you can clarify; 1. What is the best and most effective way for drifting to disable the nannies? a. Pull the ABS fuse-only b. Pull the ABS fuse and do the pedal dance c. Just do the pedal dance d. Pull the ABS fuse and do the 3 second push on the traction button 2. If I install the inner tie rods for more angle, will an alignment be needed? Cheers!

07-15-2019, 04:26 PM	#1428
WORKS Join Date: Feb 2014 Drives: WORKS CARB Legal Turbo BRZ Location: Sonoma Raceway - Bay Area Posts: 980 Thanks: 407 Thanked 646 Times in 350 Posts Mentioned: 31 Post(s) Tagged: 2 Thread(s)	One of our drivers, Adam - Doing some skidpad testing with the WORKS CARB exempt turbo shop car! [ame]https://www.youtube.com/watch?v=37FTlR9Ph2Q[/ame]

User Name		Remember Me?
Password