The Drifting Thread - Page 101 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

TylerLieberman · 05-05-2018, 11:38 PM

Quote:

Originally Posted by BRZ RN

are the megan racing tie rods holding up well for you? any reliability issues?

Long gone. Sold my car about 3 years ago. Plenty of other people have/currently are running them without issue though AFAIK

Kouki86 · 06-27-2018, 01:00 PM

I'm sure this has been mentioned before, but what is everyone doing for front clearance? Im pretty low, and i rub at full lock on the inside of the fender/frame rail. I've got Megan inner tie rods, and 17x8 +35 wheels. Running 225/45 firestone Indy 500s. Im thinking smaller tires and spacers. Any recommendations on tires and spacers?

tato.valverde · 06-27-2018, 05:30 PM

Quote:

Originally Posted by Kouki86

I'm sure this has been mentioned before, but what is everyone doing for front clearance? Im pretty low, and i rub at full lock on the inside of the fender/frame rail. I've got Megan inner tie rods, and 17x8 +35 wheels. Running 225/45 firestone Indy 500s. Im thinking smaller tires and spacers. Any recommendations on tires and spacers?

Spacers and camber. I run Parts Shop Max stackable spacers, goes from 15mm to 30mm in small increments

elekidcircus · 07-03-2018, 01:56 AM

Quote:

Originally Posted by Kouki86

I'm sure this has been mentioned before, but what is everyone doing for front clearance? Im pretty low, and i rub at full lock on the inside of the fender/frame rail. I've got Megan inner tie rods, and 17x8 +35 wheels. Running 225/45 firestone Indy 500s. Im thinking smaller tires and spacers. Any recommendations on tires and spacers?

I run 17x8.5 +30
215/45/17
With 25mm spacers
-3.0 degrees of camber
Inner tie rods and modded knuckles
I rub but i think its very minimal

Sent from my SM-G955U using Tapatalk

JoeBro · 08-08-2018, 10:58 AM

Quote:

Originally Posted by 6-Shift

Okay, so after Saturday's event, I'm pretty sold on cut knuckles/extended inner tie rods for a cheap alternative for a "legit" angle kit. The only issue I ran into was binding under high angle and deceleration. Other than that, the quicker steering made quick transitions easier. My total investment into steering angle stuff is about $350 right now, which blows any angle kit available out of the water.

Summary, if you drift your car and don't have $1000 for the PBM stuff, go to your local drift shop and have them cut and weld your knuckles.

Looking like I'll be running more or less the same setup for my event this weekend. What exactly are you finding is binding? When I go full lock right now it looks like my sway bar end links are gonna bind but everything else seems to look pretty solid. Wondering if you found anything out about this. I've heard of people not running front sway bar but also heard a lot of negatives about that.

MaryDorifto88 · 08-09-2018, 04:40 AM

Quote:

Originally Posted by JoeBro

Looking like I'll be running more or less the same setup for my event this weekend. What exactly are you finding is binding? When I go full lock right now it looks like my sway bar end links are gonna bind but everything else seems to look pretty solid. Wondering if you found anything out about this. I've heard of people not running front sway bar but also heard a lot of negatives about that.

I also running no sway bar in the front and in the rear.

in the front, because of my modified PBM Kit there is no room for mountig the sway bar

In the rear i think i helps to give more grip, because the BC Coilovers have not that much stroke to work well when the swaybar hangs on it...

cheeseburger · 08-09-2018, 12:21 PM

Thinking about making a thread about swapping in the Lexus is300 differential (welded). Anyone interested. I only ask because it seems that people really don’t use this forum.

cheeseburger · 08-09-2018, 12:22 PM

Thinking about making a thread about swapping in the Lexus is300 differential (welded). Anyone interested. I only ask because it seems that people really don’t use this forum.

elekidcircus · 08-10-2018, 01:52 AM

Quote:

Originally Posted by cheeseburger

Thinking about making a thread about swapping in the Lexus is300 differential (welded). Anyone interested. I only ask because it seems that people really don’t use this forum.

Would running that make much of a difference ?

Sent from my SM-G955U using Tapatalk

MaryDorifto88 · 08-10-2018, 06:44 AM

Would be super cool to see how you did it :-)

cheeseburger · 08-10-2018, 09:04 AM

Quote:

Originally Posted by elekidcircus

Would running that make much of a difference ?

Sent from my SM-G955U using Tapatalk

For drifting a welded differential would hugely advantageous in comparison to the stock vlsd.

Kouki86 · 08-10-2018, 09:05 AM

Quote:

Originally Posted by cheeseburger

Thinking about making a thread about swapping in the Lexus is300 differential (welded). Anyone interested. I only ask because it seems that people really don’t use this forum.

I'm interested, I've been considering it for a while now.

Trust86 · 08-10-2018, 09:14 AM

Quote:

Originally Posted by cheeseburger

For drifting a welded differential would hugely advantageous in comparison to the stock vlsd.

Is it the 3.91?

cheeseburger · 08-10-2018, 09:24 AM

Quote:

Originally Posted by Kouki86

I'm interested, I've been considering it for a while now.

At some point today I’ll get something posted up.

08-09-2018, 12:21 PM	#1407
cheeseburger IG: @_southwell_86 Join Date: Nov 2015 Drives: Rwd Prius. Location: orange county new york Posts: 118 Thanks: 6 Thanked 35 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Thinking about making a thread about swapping in the Lexus is300 differential (welded). Anyone interested. I only ask because it seems that people really don’t use this forum. __________________ 2013 frs I 🖤 drifting. https://youtu.be/XW5XBQuLDUM IG: @_southwell_86

08-09-2018, 12:22 PM	#1408
cheeseburger IG: @_southwell_86 Join Date: Nov 2015 Drives: Rwd Prius. Location: orange county new york Posts: 118 Thanks: 6 Thanked 35 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Thinking about making a thread about swapping in the Lexus is300 differential (welded). Anyone interested. I only ask because it seems that people really don’t use this forum. __________________ 2013 frs I 🖤 drifting. https://youtu.be/XW5XBQuLDUM IG: @_southwell_86

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is there a thread for 'people doing stupid things in their brand new car' thread?	Symbiont	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	36	02-18-2013 01:24 PM
BRZ Drifting.	Hunter	BRZ Photos, Videos, Wallpapers, Gallery Forum	7	09-20-2012 09:57 AM
So Cal drifting	Thefear13	Scion FR-S / Toyota 86 GT86 General Forum	0	08-10-2012 05:53 PM
REAL drifting thread	TylerLieberman	Off-Topic Lounge [WARNING: NO POLITICS]	17	02-28-2012 05:20 PM
FT-86 II (RC) Drifting	ft86cbx	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	8	11-11-2011 03:02 AM

06-27-2018, 01:00 PM	#1402
Kouki86 Member Join Date: May 2017 Drives: 2017 86 Location: GTA Posts: 51 Thanks: 4 Thanked 20 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I'm sure this has been mentioned before, but what is everyone doing for front clearance? Im pretty low, and i rub at full lock on the inside of the fender/frame rail. I've got Megan inner tie rods, and 17x8 +35 wheels. Running 225/45 firestone Indy 500s. Im thinking smaller tires and spacers. Any recommendations on tires and spacers?

08-10-2018, 06:44 AM	#1410
MaryDorifto88 Junior Member Join Date: Dec 2014 Drives: GT86 Location: Germany Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Would be super cool to see how you did it :-)

User Name		Remember Me?
Password