*** Aggressive wheels? Post them up! *** Thread - Page 270 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

KnightRyderx2 · 06-14-2018, 12:27 AM

Why did you put a 3mm spacer on the rear? What is the face setup? I want to get the same wheels but thinking to go with a +23.

Quote:

Originally Posted by spd

18x9.5 +20 all around, 3mm rear spacer. On bags, so camber is -3/-2 at ride height. I want to go a little wider in the rear, but haven't figured out what to do with that fender lip yet.

NAEightySix · 06-14-2018, 02:07 AM

Quote:

Originally Posted by Impureclient

Agree!

If there was something that was body color that could go right above the muffler/etc. to hide all the cut outs/holes, that would be a nice offering. Or even better, just a longer bottom end like this:

That looks pretty good too, but for now I know people like to pair the cut bumper with a bash bar in the rear since it looks a little better

Sent from my iPhone using Tapatalk

spd · 06-21-2018, 09:34 AM

Quote:

Originally Posted by KnightRyderx2

Why did you put a 3mm spacer on the rear? What is the face setup? I want to get the same wheels but thinking to go with a +23.

Rear needs a bit wider to fill in, but I prefer square setups. This is the deep concave, don't remember what face letter that was.

I changed my setup since then. Something like 18x9.5 +12f +5r now.

Clipdat · 06-21-2018, 12:52 PM

^^ How did you get your car so clean? Impressive detailing job.

Ichima · 06-28-2018, 03:36 PM

I know these specs aren't as aggressive as what is posted here.
But I'm trying to figure out what will be needed when I fit the Work VSKF's when i get them.
The specs are 17x9 +35 and I'm thinking either 205/40/17 or 215/40/17.
Currently I'm maxed out on my coils which are about a 4 inch drop.
Any advice?

Impureclient · 06-28-2018, 05:08 PM

^ Do 195/40R17 or even better 175/40r17 for the win.

Leonardo · 06-28-2018, 05:49 PM

Quote:

Originally Posted by Ichima

I know these specs aren't as aggressive as what is posted here.
But I'm trying to figure out what will be needed when I fit the Work VSKF's when i get them.
The specs are 17x9 +35 and I'm thinking either 205/40/17 or 215/40/17.
Currently I'm maxed out on my coils which are about a 4 inch drop.
Any advice?

4" drop on what coils?

Are you on stock wheels now?

Do they rub?

Are your stock tires done?

Because, I would try those first if they still have any tread left. 17x9 +35 wheels are not very aggressive. They only need a minimal amount of camber up front to be dialed in, and will fit a proper size tire. (215/45, 225/45, 235/40, 245/40)

Leonardo · 06-28-2018, 06:05 PM

Quote:

Originally Posted by Impureclient

^ Do 195/40R17 or even better 175/40r17 for the win.

If you are looking into obscure sizes, you can get a 165/35/17. LOL!!!!

via Imgflip Meme Generator

humfrz · 06-29-2018, 12:58 AM

Ya'll keep it up, soon we will be right back there …

humfrz

Ichima · 06-29-2018, 02:51 AM

Lol thanks for the replies. But i’m maxed out on bc extreme lows and i’m looking to run a 215/45 or 215/40 but i do rub up fromt a good amount on stock wheels

Hella Basa · 07-02-2018, 04:05 AM

Let's revive this thread!

kingthefab · 07-02-2018, 05:50 PM

Quote:

Originally Posted by larryw

18x9.5 +30
225/40 front and 245/35 Rear

can someone tell me where i can get these rims? i absolutely love them

monkeybike · 07-03-2018, 09:28 AM

http://www.evasivemotorsports.com/mm...ode=WORK-CR-KW

iamhubert · 07-31-2018, 11:50 PM

Previous setup: RS Watanabe R Type

front 16x8.5j -9 rear 16x8.5j -6 or 16x8.5j 0 NS20 wheels

Current setup: Avs Model V
Front 17x9j +12 Rear 17x9j +20

Sent from my iPhone using Tapatalk

06-29-2018, 12:58 AM	#3775
humfrz Senior Member Join Date: May 2013 Drives: 2013 FR-S, white, MT Location: Puyallup, WA Posts: 30,402 Thanks: 29,782 Thanked 32,802 Times in 16,826 Posts Mentioned: 714 Post(s) Tagged: 2 Thread(s)	Ya'll keep it up, soon we will be right back there … humfrz Attached Images

07-31-2018, 11:50 PM	#3780
iamhubert Member Join Date: Sep 2014 Drives: 2013 frs Location: Chicago Posts: 86 Thanks: 66 Thanked 79 Times in 34 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Previous setup: RS Watanabe R Type front 16x8.5j -9 rear 16x8.5j -6 or 16x8.5j 0 NS20 wheels Current setup: Avs Model V Front 17x9j +12 Rear 17x9j +20 Sent from my iPhone using Tapatalk __________________ IG: iamhubert

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post the Wheels You want On your FRS/BRZ!!	Zaku	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1738	10-11-2017 05:29 PM
RPF1 and PF01 aggressive fitment size requests	Crossover Auto	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	12	10-22-2012 03:30 PM
post VIN with any problem thread?	fistpoint	Issues \| Warranty \| Recalls / TSB	0	10-04-2012 11:11 PM
Do aggressive offsets cause more debris to kick up into the paint?	switchlanez	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	7	09-26-2012 11:03 PM
Scion FR-S / Toyota FT-86 / Subaru with Aggressive Body & High Wing! + VIDEO!	Hachiroku	Scion FR-S / Toyota 86 GT86 General Forum	538	06-15-2011 03:20 AM

06-28-2018, 03:36 PM	#3771
Ichima Senior Member Join Date: May 2018 Drives: 13' Lightning Red Brz Location: CT Posts: 114 Thanks: 7 Thanked 52 Times in 36 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I know these specs aren't as aggressive as what is posted here. But I'm trying to figure out what will be needed when I fit the Work VSKF's when i get them. The specs are 17x9 +35 and I'm thinking either 205/40/17 or 215/40/17. Currently I'm maxed out on my coils which are about a 4 inch drop. Any advice?

06-28-2018, 05:08 PM	#3772
Impureclient Banned Join Date: May 2015 Drives: 2015 FR-S Location: NPR, Florida Posts: 2,404 Thanks: 1,802 Thanked 2,903 Times in 1,282 Posts Mentioned: 25 Post(s) Tagged: 2 Thread(s)	^ Do 195/40R17 or even better 175/40r17 for the win.

06-29-2018, 02:51 AM	#3776
Ichima Senior Member Join Date: May 2018 Drives: 13' Lightning Red Brz Location: CT Posts: 114 Thanks: 7 Thanked 52 Times in 36 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Lol thanks for the replies. But i’m maxed out on bc extreme lows and i’m looking to run a 215/45 or 215/40 but i do rub up fromt a good amount on stock wheels

07-02-2018, 04:05 AM	#3777
Hella Basa Member Join Date: Apr 2018 Drives: 2014 Subaru Brz Limited Location: Ca Posts: 39 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Let's revive this thread!

07-03-2018, 09:28 AM	#3779
monkeybike Senior Member Join Date: Nov 2017 Drives: 86 Location: Australia Posts: 258 Thanks: 229 Thanked 237 Times in 124 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	http://www.evasivemotorsports.com/mm...ode=WORK-CR-KW

User Name		Remember Me?
Password