WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1360 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

KDad2 · 06-07-2018, 11:16 PM

Quote:

Originally Posted by SuperTom

Can you do me a major huge favor and weight the stock dual fan shroud setup? Mishimoto claims its lighter at 7.5lbs I just need to know how much lighter is it than stock

No problem. I can run it over to my neighbors and check on his scale as soon as I take it out. It might not be until the end of the month. Family obligations... I'm still managing to slip in a few mods though. I've seen how much you have shaved off in weight so I see where you are coming from. Nice going

Impureclient · 06-08-2018, 07:22 PM

Quote:

Originally Posted by Leonardo

Yes, I have a fresh set of lug nuts to put on after I install the new parts. They are open ended, so I can take my spacers off if I want.

Which extended studs are you using and if ARP, what part number? What width spacer are you using as it can't be much as you look close to where you should be, so 5 or 10 mm?
I'm wanting to get another 10mm to 15mm more than the stock ones but I can't find the UHL of the OEM ones to figure this out. ARP has a 1.75", 1.95" and 2.535" UHL.

Ashikabi · 06-08-2018, 07:40 PM

Quote:

Originally Posted by Impureclient

Which extended studs are you using and if ARP, what part number? What width spacer are you using as it can't be much as you look close to where you should be, so 5 or 10 mm?
I'm wanting to get another 10mm to 15mm more than the stock ones but I can't find the UHL of the OEM ones to figure this out. ARP has a 1.75", 1.95" and 2.535" UHL.

ARP has 3 inch UHL studs at ft86sf. I got them with my XXRs and 5mm spacers and still thread nearly the entire length of my extended Kics lugs

Impureclient · 06-08-2018, 07:49 PM

Quote:

Originally Posted by Ashikabi

ARP has 3 inch UHL studs at ft86sf. I got them with my XXRs and 5mm spacers and still thread nearly the entire length of my extended Kics lugs

Those are part # 100-7716 and you say 3" UHL, so that helps. I don't even see those in the ARP sebsite. I just want another 10mm out farther than the OEM ones so I guess the 100-7729(2.535") would work and not protrude out so much as those 3" ones. Trying to get a 5mm front and 10mm rear in there and use closed ended lug nuts. I don't want the extra headache of dealing with open ended lugs and the corrosion they leave the stud too.

Leonardo · 06-08-2018, 08:49 PM

Yes, a 10mm spacer is what they are for. They are 50mm ebay studs.

Impureclient · 06-08-2018, 09:03 PM

Quote:

Originally Posted by Leonardo

Yes, a 10mm spacer is what they are for. They are 50mm ebay studs.

Wow, those are like 1/4 the price of the ARP ones. On the other end of the spectrum, there are Megan racing ones for $700.00!

Teseo · 06-08-2018, 09:07 PM

Bough a set of toyo proxes T1 sport (225-45). Anyone have them?

Leonardo · 06-08-2018, 09:29 PM

Quote:

Originally Posted by Impureclient

Wow, those are like 1/4 the price of the ARP ones. On the other end of the spectrum, there are Megan racing ones for $700.00!

Well, Ill try to break them to see how tough they are.

Impureclient · 06-08-2018, 09:46 PM

Should be the car guy way of saying "break a leg"...break a wheel stud, buddy.

Ashikabi · 06-08-2018, 10:32 PM

If it helps, on my setup, the stud doesn't protrude from the lug. It's about 1/4 inch inside. If you get long lugs, I would imagine anything short of 3"will work for you

Quote:

Originally Posted by Impureclient

Those are part # 100-7716 and you say 3" UHL, so that helps. I don't even see those in the ARP sebsite. I just want another 10mm out farther than the OEM ones so I guess the 100-7729(2.535") would work and not protrude out so much as those 3" ones. Trying to get a 5mm front and 10mm rear in there and use closed ended lug nuts. I don't want the extra headache of dealing with open ended lugs and the corrosion they leave the stud too.

mrg666 · 06-09-2018, 05:50 PM

Installed Fumoto valve, changed oil, and washed. Then, we went for a ride

ZOMFGAARON · 06-10-2018, 02:21 PM

Not today but a couple days ago

Sent from my iPhone using Tapatalk

Ashikabi · 06-10-2018, 02:43 PM

Quote:

Originally Posted by ZOMFGAARON

Not today but a couple days ago

Sent from my iPhone using Tapatalk

I gotta know... Is the scoop functional?

Breezy914 · 06-10-2018, 03:11 PM

My wrb

Sent from my SM-G930P using Tapatalk

06-08-2018, 08:49 PM	#19031
Leonardo Country Boy 4 Life Join Date: Jul 2012 Drives: 19' & 06' Ridgelines, 13' FR-S Location: EUGENE Posts: 5,228 Thanks: 6,719 Thanked 5,293 Times in 2,720 Posts Mentioned: 47 Post(s)	Yes, a 10mm spacer is what they are for. They are 50mm ebay studs. __________________ I LIKE TIRES!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 04:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 06:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 10:19 PM

06-08-2018, 09:07 PM	#19033
Teseo Senior Member Join Date: Jun 2014 Drives: frs Location: Gunsai Posts: 4,957 Thanks: 7,485 Thanked 2,981 Times in 1,803 Posts Mentioned: 23 Post(s)	Bough a set of toyo proxes T1 sport (225-45). Anyone have them?

06-08-2018, 09:46 PM	#19035
Impureclient Banned Join Date: May 2015 Drives: 2015 FR-S Location: NPR, Florida Posts: 2,404 Thanks: 1,802 Thanked 2,903 Times in 1,282 Posts Mentioned: 25 Post(s)	Should be the car guy way of saying "break a leg"...break a wheel stud, buddy.

06-10-2018, 02:21 PM	#19038
ZOMFGAARON A Demon Join Date: Dec 2013 Drives: Raven GT86 Location: Denver Posts: 1,992 Thanks: 190 Thanked 1,321 Times in 701 Posts Mentioned: 20 Post(s)	Not today but a couple days ago Sent from my iPhone using Tapatalk

06-10-2018, 03:11 PM	#19040
Breezy914 Junior Member Join Date: Apr 2018 Drives: BRZ MY14 Location: US Posts: 3 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s)	My wrb Sent from my SM-G930P using Tapatalk

User Name		Remember Me?
Password