WHAT DID YOU DO TO YOUR BRZ TODAY? - Page 1196 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

trigun286 · 04-08-2018, 05:25 PM

Quote:

Originally Posted by jtice

Great Sound to it!
What is the rest of your exhaust?
This is one of the headers I am looking at getting, but honestly I am worried about a catless header.
I plan to do some road trips with the car, and even stock, its already not a real quiet car on the highway.

Sorry for the late response but I have a Perrin 2.5" Catback. There is noticeably more drone with the header but it's a relatively quiet pairing compared to any other catback/header combo (except with a Q300 or stock). IIRC, catless will mainly add some raspyness/hiss to the note more than anything else.

norcalpb · 04-09-2018, 05:23 PM

Swapped my 245/40/17 PSS (40k miles) for 235/40/17 Federal RS-RR R compound tires. Even though these tires are only 235, they don’t look as stretched as the 245 PSS.

Wheels are RPF1 17x9 +35.

OfficeWorker · 04-10-2018, 08:56 PM

I wanted rear spats that were relatively low profile and blended a little better with the rear diffuser's black textured plastic than a higher gloss finish (as much as I love CF). I think it came out reasonably well...it's not super obvious, but it's still there to sort of complete the bumper, I guess? (the Maker's photos really didnt illustrate the product too well!) I also got a little shifty.

Ghost of Akina · 04-10-2018, 09:34 PM

Took it for the first time this Spring. Felt so good to be back behind the wheel!

Brink · 04-10-2018, 09:57 PM

Quote:

Originally Posted by OfficeWorker

I wanted rear spats that were relatively low profile and blended a little better with the rear diffuser's black textured plastic than a higher gloss finish (as much as I love CF). I think it came out reasonably well...it's not super obvious, but it's still there to sort of complete the bumper, I guess? (the Maker's photos really didnt illustrate the product too well!) I also got a little shifty.

Velox spats?

OfficeWorker · 04-11-2018, 08:49 PM

Today I did a wash, wax removal, decon, and clay. Car was covered in iron. Tomorrow I compound. I feel kind of guilty leaving the car unprotected overnight and all.

Quote:

Originally Posted by Brink

Velox spats?

Indeed!

I know nothing about the brand...and have no idea whether they will hold up very well. Although the mounting hardware was solid. I like their skirts as well with the same low-profile finish/style.

Brink · 04-11-2018, 09:02 PM

Quote:

Originally Posted by OfficeWorker

Today I did a wash, wax removal, decon, and clay. Car was covered in iron. Tomorrow I compound. I feel kind of guilty leaving the car unprotected overnight and all.

Indeed!

I know nothing about the brand...and have no idea whether they will hold up very well. Although the mounting hardware was solid. I like their skirts as well with the same low-profile finish/style.

Don't their skirts need to be drilled through the pinch welds? I thought that's what it looked like when I was looking at them a while back, didn't like the thought of doing that.

johan · 04-11-2018, 09:02 PM

Quote:

Originally Posted by OfficeWorker

Today I did a wash, wax removal, decon, and clay. Car was covered in iron. Tomorrow I compound. I feel kind of guilty leaving the car unprotected overnight and all.

Indeed!

I know nothing about the brand...and have no idea whether they will hold up very well. Although the mounting hardware was solid. I like their skirts as well with the same low-profile finish/style.

Verus (formerly Velox) is good ish. I've a bunch of their stuff and have been a repeat customer of theirs for a few years now.

Be warned, the side skirts are well made, but very difficult to install.

BirdTRD · 04-11-2018, 09:05 PM

Quote:

Originally Posted by OfficeWorker

Today I did a wash, wax removal, decon, and clay. Car was covered in iron. Tomorrow I compound. I feel kind of guilty leaving the car unprotected overnight and all.

I wish I had the skill and/or desire to do that to mine...I have neither. I wash it and maybe spray some speed wax on it, but that's about it....I know, I suck!

But I will fix the shit out of it!

OfficeWorker · 04-12-2018, 09:30 PM

Quote:

Originally Posted by Brink

Don't their skirts need to be drilled through the pinch welds? I thought that's what it looked like when I was looking at them a while back, didn't like the thought of doing that.

Yikes!

OfficeWorker · 04-12-2018, 09:32 PM

I was in the middle of this, and then I had to run out. I got a lot of attention today. I rolled with it.

Decep · 04-12-2018, 10:44 PM

Quote:

Originally Posted by OfficeWorker

I was in the middle of this, and then I had to run out. I got a lot of attention today. I rolled with it.

Be careful with the tape on the those roof lines, my tape wanted to pull up the black strips on the roof lol.

carsebuco · 04-13-2018, 11:40 PM

Installed my SpecD headlights last night after adapting it to a 8 pin connector, and it looks BEAUTIFUL.

I did buy a hyperflash relay because it doesn't like to share power with my side markers. I'll be installing that with my new headlight mounts that I ordered in the next few days.

trippinbillies40 · 04-15-2018, 12:54 AM

Brought home a brother for the white '17!

Have two for now. White car is up for sale. This car was WAY too good of a deal to pass up. First autocross with it tomorrow morning already.

04-10-2018, 08:56 PM	#16733
OfficeWorker Senior Member Join Date: Feb 2018 Drives: 2018 WRX STI Location: Maryland Posts: 107 Thanks: 56 Thanked 49 Times in 37 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I wanted rear spats that were relatively low profile and blended a little better with the rear diffuser's black textured plastic than a higher gloss finish (as much as I love CF). I think it came out reasonably well...it's not super obvious, but it's still there to sort of complete the bumper, I guess? (the Maker's photos really didnt illustrate the product too well!) I also got a little shifty. Attached Images

04-12-2018, 09:32 PM	#16741
OfficeWorker Senior Member Join Date: Feb 2018 Drives: 2018 WRX STI Location: Maryland Posts: 107 Thanks: 56 Thanked 49 Times in 37 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I was in the middle of this, and then I had to run out. I got a lot of attention today. I rolled with it. Attached Images

04-13-2018, 11:40 PM	#16743
carsebuco How do I shift? Join Date: Nov 2016 Drives: '13 GBS BRZ Location: AZ Posts: 376 Thanks: 399 Thanked 129 Times in 92 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Installed my SpecD headlights last night after adapting it to a 8 pin connector, and it looks BEAUTIFUL. I did buy a hyperflash relay because it doesn't like to share power with my side markers. I'll be installing that with my new headlight mounts that I ordered in the next few days. __________________ Last edited by carsebuco; 04-14-2018 at 12:27 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 01:40 PM
Got my new FR-S today.	Boosted2.0	Scion FR-S / Toyota 86 GT86 General Forum	51	06-03-2012 11:35 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 02:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 11:19 PM
sat in a BRZ today	NESW20	BRZ First-Gen (2012+) — General Topics	8	03-31-2012 09:53 AM

04-09-2018, 05:23 PM	#16732
norcalpb Senior Member Join Date: Oct 2013 Drives: 2013 BRZ, 2023 Model 3 Location: SF Bay Area Posts: 2,345 Thanks: 1,256 Thanked 902 Times in 590 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Swapped my 245/40/17 PSS (40k miles) for 235/40/17 Federal RS-RR R compound tires. Even though these tires are only 235, they don’t look as stretched as the 245 PSS. Wheels are RPF1 17x9 +35.

04-15-2018, 12:54 AM	#16744
trippinbillies40 Senior Member Join Date: Mar 2013 Drives: '22 WRB Location: US Posts: 863 Thanks: 201 Thanked 1,227 Times in 405 Posts Mentioned: 37 Post(s) Tagged: 0 Thread(s)	Brought home a brother for the white '17! Have two for now. White car is up for sale. This car was WAY too good of a deal to pass up. First autocross with it tomorrow morning already.

User Name		Remember Me?
Password