WHAT DID YOU DO TO YOUR BRZ TODAY? - Page 1195 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jtice · 04-03-2018, 11:08 PM

Installed a Mini 0906 Dash Cam, which is a front and rear cam setup at 1080p 30fps
Seems like a nice setup for the price (about $115 of ebay)
Look for the ones that come with a cpl filter, looks like its going to take alot of glare off the windshield. (you rotate the filter till its the clearest)

jtice · 04-03-2018, 11:29 PM

Also designed and 3D printed a dual magnet RAM mount, for my phone.
The single one couldnt cope with the BRZ G Forces haha

Trollhart · 04-04-2018, 04:16 AM

Had 2 obnoxious dents pushed back out by my smart repair shop.

One on the diver side rear quarter, right on the edge above the wheel house, and one a bit further up on the roof line.

Luckily, both spots were accessible from the inside, so paid 120 bucks total and the car loks like the dents never existed.

Zoid · 04-04-2018, 11:00 AM

Quote:

Originally Posted by Trollhart

Had 2 obnoxious dents pushed back out by my smart repair shop.

One on the diver side rear quarter, right on the edge above the wheel house, and one a bit further up on the roof line.

Luckily, both spots were accessible from the inside, so paid 120 bucks total and the car loks like the dents never existed.

Nice, I've been looking for a good PDR in my area to take care of mine but they left a nice scratch right in the dent and it doesn't seem to wash off. I'm not sure if having someone pop it out would make it worse.

SmartedPanda · 04-04-2018, 05:30 PM

Wrapped my passenger side panel, tried to do the stereo trim but I screwed up badly.
Also did the clutch spring removal, definitely helps with shifting. TRD Quick Shift + Clutch Spring Removal = everything got harder to shift when sore.

Brink · 04-04-2018, 10:43 PM

Took my BRZ to @Elite Performance today to get some new shoes put on (Michelin Pilot Sport 4S), get some camber bolts installed up front for a bit of negative camber, and finally get my APR spats installed.

OfficeWorker · 04-05-2018, 08:31 PM

Threw on a Lathe Werks stainless steel reverse teardrop shift knob. I am amazed how much more enjoyable shifting gears is now, and how effortlessly smooth they shift.

4Flat4Life · 04-05-2018, 09:58 PM

https://imgur.com/a/Zwgfs

I did the Tail light mod and added a carbon fiber piece in the center of the tail light.

e30kawi · 04-06-2018, 05:12 PM

Finally bought mine! Been lusting after one since 2011/2012 when I saw the concept. Haven't driven it much, but really looking forward to using this as a part time daily. 2018 White pearl with pp

Also, did not crash lol

spike021 · 04-06-2018, 06:04 PM

Quote:

Originally Posted by e30kawi

Finally bought mine! Been lusting after one since 2011/2012 when I saw the concept. Haven't driven it much, but really looking forward to using this as a part time daily. 2018 White pearl with pp

Also, did not crash lol

https://instagram.com/p/BhPld91hIj2n...jRYPxTgLrcp80/

Sorry about posting a link but it is way harder than necessary to upload a photo on here from my phone.

The link doesn't work :\ Maybe a private post or something?

Zoid · 04-07-2018, 01:39 PM

Picked up the new lip at the dealership, now just gotta wait to be able to get it installed later this week.

tehShirt · 04-07-2018, 08:53 PM

Thanks to @derekbrz24 for the tips on removing and painting the steering wheel trim.

thomasmryan · 04-08-2018, 12:54 PM

hit the skyway last night with the cloud ceiling about 4000'. dropped a U turn at the TN line....snowing after the gap for some 129 fun

BirdTRD · 04-08-2018, 02:05 PM

Took off (and washed) her winter boots and put on her spring slippers.

04-04-2018, 05:30 PM	#16721
SmartedPanda Senior Member Join Date: May 2012 Drives: SWP BRZ Limited Manual. 2014 Location: San Jose, CA Posts: 647 Thanks: 155 Thanked 155 Times in 115 Posts Mentioned: 0 Post(s)	Wrapped my passenger side panel, tried to do the stereo trim but I screwed up badly. Also did the clutch spring removal, definitely helps with shifting. TRD Quick Shift + Clutch Spring Removal = everything got harder to shift when sore. __________________ [\| Blox 490 Knob \| Mishimoto Silicon Intake \| K&N Filter \| DD Always-On DRL \| Tomei 60S \| Weather Tech \| RED USDM TOM's Tail Lights \| OEM Underbody Panels \| Intec High Mount Brake \| RexSpeed Heated Wide Mirrors \| TC105N 17x9 \| Super Sport 245/40R17 \|TRD Quickshifter \| Porsche Brake Air Duct \| TRD Sliding Armrest\| OEM Knee Pads \| MTEC Shifter Springs\| WRX OEM Oil Cooler\| Generic PVC Catch Can\|]

04-04-2018, 10:43 PM	#16722
Brink Senior Member Join Date: Apr 2017 Drives: 2017 BRZ Location: CA Posts: 662 Thanks: 200 Thanked 392 Times in 236 Posts Mentioned: 3 Post(s)	Took my BRZ to @Elite Performance today to get some new shoes put on (Michelin Pilot Sport 4S), get some camber bolts installed up front for a bit of negative camber, and finally get my APR spats installed. Attached Images

04-06-2018, 05:12 PM	#16725
e30kawi Senior Member Join Date: Nov 2011 Drives: CWP limited Location: Texas Posts: 187 Thanks: 165 Thanked 26 Times in 25 Posts Mentioned: 1 Post(s)	Finally bought mine! Been lusting after one since 2011/2012 when I saw the concept. Haven't driven it much, but really looking forward to using this as a part time daily. 2018 White pearl with pp Also, did not crash lol Last edited by e30kawi; 04-06-2018 at 07:02 PM. Reason: Link doesn't work and can't make my picture small enough on my phone

04-08-2018, 12:54 PM	#16729
thomasmryan Senior Member Join Date: Jan 2016 Drives: hyper blue Location: east tn Posts: 406 Thanks: 169 Thanked 264 Times in 158 Posts Mentioned: 2 Post(s)	hit the skyway last night with the cloud ceiling about 4000'. dropped a U turn at the TN line....snowing after the gap for some 129 fun Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got my new FR-S today.	Boosted2.0	Scion FR-S / Toyota 86 GT86 General Forum	51	06-03-2012 10:35 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 10:19 PM
sat in a BRZ today	NESW20	BRZ First-Gen (2012+) — General Topics	8	03-31-2012 08:53 AM

04-03-2018, 11:08 PM	#16717
jtice Banned Join Date: Aug 2017 Drives: Man Location: https://t.me/pump_upp Posts: 55 Thanks: 5 Thanked 37 Times in 13 Posts Mentioned: 0 Post(s)	Installed a Mini 0906 Dash Cam, which is a front and rear cam setup at 1080p 30fps Seems like a nice setup for the price (about $115 of ebay) Look for the ones that come with a cpl filter, looks like its going to take alot of glare off the windshield. (you rotate the filter till its the clearest)

04-03-2018, 11:29 PM	#16718
jtice Banned Join Date: Aug 2017 Drives: Man Location: https://t.me/pump_upp Posts: 55 Thanks: 5 Thanked 37 Times in 13 Posts Mentioned: 0 Post(s)	Also designed and 3D printed a dual magnet RAM mount, for my phone. The single one couldnt cope with the BRZ G Forces haha

04-04-2018, 04:16 AM	#16719
Trollhart Member Join Date: Sep 2016 Drives: 2013 Subaru BRZ Sport Location: Northern Germany Posts: 52 Thanks: 7 Thanked 68 Times in 30 Posts Mentioned: 1 Post(s)	Had 2 obnoxious dents pushed back out by my smart repair shop. One on the diver side rear quarter, right on the edge above the wheel house, and one a bit further up on the roof line. Luckily, both spots were accessible from the inside, so paid 120 bucks total and the car loks like the dents never existed.

04-05-2018, 08:31 PM	#16723
OfficeWorker Senior Member Join Date: Feb 2018 Drives: 2018 WRX STI Location: Maryland Posts: 107 Thanks: 56 Thanked 49 Times in 37 Posts Mentioned: 0 Post(s)	Threw on a Lathe Werks stainless steel reverse teardrop shift knob. I am amazed how much more enjoyable shifting gears is now, and how effortlessly smooth they shift.

04-05-2018, 09:58 PM	#16724
4Flat4Life Member Join Date: Nov 2017 Drives: 2018 Subaru BRZ STi Location: Okinawa, Japan Posts: 19 Thanks: 0 Thanked 14 Times in 11 Posts Mentioned: 0 Post(s)	https://imgur.com/a/Zwgfs I did the Tail light mod and added a carbon fiber piece in the center of the tail light.

04-07-2018, 01:39 PM	#16727
Zoid Member Join Date: May 2017 Drives: 2015 Subaru BRZ Series.Blue CWP Location: Miami Beach Posts: 74 Thanks: 8 Thanked 17 Times in 14 Posts Mentioned: 0 Post(s)	Picked up the new lip at the dealership, now just gotta wait to be able to get it installed later this week.

User Name		Remember Me?
Password