OFT Openflash V4 tunes released for 2017+ with Launch/FFS

[steve99]

Originally Posted by Kayysonie

@steve99

What do you think of the V4 tunes compare to the ones you and @Wayno optimized?

V4 is optimised for USA/canada fuels and work quite well on most european fuels.

If your in asia/australia or maybw some backblocks of europe or other parts of the world where fuel quality is not up to the high standards of usa/europe then you can benifit from some adjustments

[stlgrym3]

my version 2 tablet got shipped out today before I could cancel the order and go with ecutek, oh well, guess I will give it a try. Does the new version table shipped with V4 tunes? Vendor said they do buy seen this thread was just created today, I have some doubt on that.

Some vendor had mentioned OpenFlash inflates their tuned data by inflating the stock dyno curves so it makes stage 1 and 2 tunes with OTF they much appealing on dyno charts. Is there such thing? I know this is an OpenFlash thread, but try to keep it objective please.

Also, someone mentioned there’s a problem with push button and OpenFlash tablet, can anyone elaborate on that?

[guybo]

Originally Posted by Submarinesonce

guess you've got to do a new dyno lol, thanks for being the canary. im going to load it on mine tonight.

I was thinking this when I did my test drive GRRRR. You're welcome.

Originally Posted by Teseo

@guybo
Thanks for your report. Its posible you can do a dyno again but with new tunes?

You buyin? I'm a cheap bastard! maybe if there's another $50 dyno day soon I'll redo it... I feel like I have unfinished business since I dyno'ed at 197 GRRRR

Originally Posted by Mad1723

@guybo How much of a difference to the cold start? I'm only running a high-flow cat in the whole line, so my cold starts are obnoxious. Is it completely gone?

Oh yeah. Start up is like the normal Vroom and the RPMs are a little higher but the obnoxiousness factor is gone. The tone is YOUR engine tone and not near as loud.

Originally Posted by mrmamba

Guys do U know if on this maps is included the soft rev limiter?

Yup, seems to be raised some too. I didn't see just what it was at but it was way above what I had it at before! (I just checked- 7600 RPM is the default)

[mizzta21]

how come the tunes wont load for me? says ihave data error-mismatch

[g0lds]

Originally Posted by mizzta21

how come the tunes wont load for me? says ihave data error-mismatch

Same here. I updated defs too

[mizzta21]

Originally Posted by g0lds

Same here. I updated defs too

ya, hopefully someone can chime in. curious to look at the updates...

[steve99]

Originally Posted by stlgrym3

my version 2 tablet got shipped out today before I could cancel the order and go with ecutek, oh well, guess I will give it a try. Does the new version table shipped with V4 tunes? Vendor said they do buy seen this thread was just created today, I have some doubt on that.

Some vendor had mentioned OpenFlash inflates their tuned data by inflating the stock dyno curves so it makes stage 1 and 2 tunes with OTF they much appealing on dyno charts. Is there such thing? I know this is an OpenFlash thread, but try to keep it objective please.

Also, someone mentioned there’s a problem with push button and OpenFlash tablet, can anyone elaborate on that?

Issue only with K00D rom cars

[steve99]

Originally Posted by mizzta21

how come the tunes wont load for me? says ihave data error-mismatch

Always use defs that come with tune pack, remove your old defs

[Lantanafrs2]

Originally Posted by stlgrym3

my version 2 tablet got shipped out today before I could cancel the order and go with ecutek, oh well, guess I will give it a try. Does the new version table shipped with V4 tunes? Vendor said they do buy seen this thread was just created today, I have some doubt on that.

Some vendor had mentioned OpenFlash inflates their tuned data by inflating the stock dyno curves so it makes stage 1 and 2 tunes with OTF they much appealing on dyno charts. Is there such thing? I know this is an OpenFlash thread, but try to keep it objective please.

Also, someone mentioned there’s a problem with push button and OpenFlash tablet, can anyone elaborate on that?

I'm very happy with my tablet and header. I think you will be as well.

[stlgrym3]

Originally Posted by Lantanafrs2

I'm very happy with my tablet and header. I think you will be as well.

Do you have a 2017 86/BRZ?

[stlgrym3]

Originally Posted by steve99

Issue only with K00D rom cars

What are K00D rom? Excuse me for my newbiness

[steve99]

Originally Posted by stlgrym3

What are K00D rom? Excuse me for my newbiness

2017 auto car only

[stlgrym3]

Originally Posted by steve99

2017 auto car only

That’s exactly what I have. So I can’t tune with my new tablet?

[stlgrym3]

Originally Posted by steve99

2017 auto car only

I read you posted earlier that Shiv should have a Fox by tomorrow. How do I apply the new fix to my tablet, I assume download from OFT website?