|
Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack Specific topics relating to wheels and tires. |
|
Thread Tools | Search this Thread |
12-29-2017, 04:16 PM | #169 | |
Senior Member
Join Date: Apr 2012
Drives: 2014 Subaru BRZ
Location: Hillsboro, Oregon
Posts: 770
Thanks: 450
Thanked 536 Times in 316 Posts
Mentioned: 137 Post(s)
Tagged: 2 Thread(s)
|
Quote:
It was super tight between the shock and the wheel on my car, probably less than 5mm but keep in mind, that was the 9.5" wheel. You can get the hubcentric rings anywhere these wheels are sold at. |
|
12-29-2017, 05:16 PM | #170 | |
Member
Join Date: Aug 2016
Drives: '14 Asphalt FR-S
Location: Louisville, KY
Posts: 13
Thanks: 2
Thanked 7 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
2. If you are running stock struts, the spacing to your spring perch will not change with lowering. Lowering will just reduce your clearances to the fenders, wheel wells, etc. That being said I have 57DRs in 17x9 +38, running 245/40R17 Firehawk Indy 500s. I have stock spring/strut combo with SPC camber bolts in the top strut hole at around -1.4 degrees. If I recall the clearance is around a centimeter. (See picture) Keep in mind different tires have slightly difference side profiles, so clearances can vary. Sent from my SM-J510MN using Tapatalk |
|
The Following 2 Users Say Thank You to KryptoNate For This Useful Post: | DarkSideFRS (12-29-2017), Espi (04-15-2024) |
12-29-2017, 05:16 PM | #171 | |
Banned
Join Date: Apr 2017
Drives: 2013 pearl white FR-S
Location: Socal
Posts: 536
Thanks: 39
Thanked 191 Times in 124 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Quote:
the 5mm clearance was with natural camber, correct? that should be around -1.0? |
|
12-29-2017, 05:22 PM | #172 | |
Banned
Join Date: Apr 2017
Drives: 2013 pearl white FR-S
Location: Socal
Posts: 536
Thanks: 39
Thanked 191 Times in 124 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
12-29-2017, 06:39 PM | #173 | |
Member
Join Date: Aug 2016
Drives: '14 Asphalt FR-S
Location: Louisville, KY
Posts: 13
Thanks: 2
Thanked 7 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
This thread helped me decide on wheels, so I will post my setup. - Gramlights 57DR 17x9 +38 in Gunblue - 245/40R17 Firehawk Indy 500 - Stock suspension - SPC front camber bolts - Camber: -1.4F, -1.2R - Toe: 0F, 0R I have daily driven this setup for the past year with absolutely no rubbing issues. Sent from my SM-J510MN using Tapatalk |
|
The Following User Says Thank You to KryptoNate For This Useful Post: | 86geek (01-09-2018) |
01-09-2018, 12:59 AM | #174 | |
Senior Member
Join Date: Oct 2014
Drives: 2015 FRS Asphalt
Location: Honolulu
Posts: 1,001
Thanks: 1,302
Thanked 343 Times in 265 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
04-01-2018, 11:38 AM | #175 |
Member
Join Date: Oct 2016
Drives: '17 Toyota 86
Location: Hawaii
Posts: 18
Thanks: 0
Thanked 18 Times in 6 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Went from 18x9.5 +38 RPF1`s to these 17x9 +38 57DR's. The car still feels great, but I feel it's not nearly as planted as it was on my previous setup. Still pleased! Moving up to 255/40's next go 'round.
Stats/Specs: 17x9 +38 Rays 57DR 245/40R17 Toyo Extensa HP Lowered roughly 2" Front: -2.2/Rear: -2.3 Tein Flex Z's Voodoo13 Rear LCA's Lots of other little suspension bits |
The Following User Says Thank You to TheLowlyThird For This Useful Post: | KryptoNate (04-02-2018) |
07-06-2018, 01:16 PM | #176 |
Banned
Join Date: Apr 2017
Drives: 2013 pearl white FR-S
Location: Socal
Posts: 536
Thanks: 39
Thanked 191 Times in 124 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
quick question... did u guys swap out your oem tpms over to the 57dr?
|
07-07-2018, 08:26 AM | #177 | |
Member
Join Date: Aug 2016
Drives: '14 Asphalt FR-S
Location: Louisville, KY
Posts: 13
Thanks: 2
Thanked 7 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
As far as I know, there shouldn't be a problem using the OE sensors on these wheels. Sent from my SM-J510MN using Tapatalk |
|
07-17-2018, 12:08 PM | #178 |
Banned
Join Date: Apr 2017
Drives: 2013 pearl white FR-S
Location: Socal
Posts: 536
Thanks: 39
Thanked 191 Times in 124 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
got them on yesterday... dialed in my camber to -1.4F and -1.2R... would have kept them at -1.7F and -1.3R tho... btw, the fronts WILL fit with -1.7 camber up front on stock struts and TRD springs... there was abt 3mm clearance from the strut perch
|
The Following User Says Thank You to DarkSideFRS For This Useful Post: | KryptoNate (07-18-2018) |
12-07-2021, 02:43 AM | #179 |
Junior Member
Join Date: Dec 2021
Drives: 2019 BRZ Limited
Location: Australia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
57DR 17x9 + 38mm
Hankook Ventus Rs4 245/40/17 Tein Flex Z Camber 3.2F/2.0R Last edited by tc3191; 12-07-2021 at 11:18 PM. |
12-07-2021, 07:07 PM | #180 |
Member
Join Date: Jul 2015
Drives: 2013 Scion FRS
Location: Las Vegas
Posts: 74
Thanks: 28
Thanked 62 Times in 33 Posts
Mentioned: 0 Post(s)
Tagged: 2 Thread(s)
|
17x9 +38 Semi gloss black Michelin pilot sports as4 Tein flex z Camber fr -1.1 Camber rr -1.5 O toe Sent from my iPhone using Tapatalk |
|
|
Tags |
fit, oem tires, rims |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wheel Directory: Gram Lights 57Xtremes 18x8.5 +45/18x9.5 +40 | WorkoArt | Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack | 18 | 02-18-2017 06:46 PM |
Wheel Directory: Gram Lights 57Xtreme 19x9.5 +43 | RavSpec | Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack | 31 | 12-04-2014 10:56 PM |
Gram Lights 57DR - 17x9+38 in Gun Blue | 00vsmcoupe | Wheels and Tires | 17 | 01-08-2014 08:02 AM |
WTB Gram Lights 57DR 17x9 +38 in Gun Blue or Enkei RPF1 18x9.5 +38 in SBC | Shiro86 | Want-To-Buy Requests | 2 | 11-08-2013 10:18 AM |