|
DIY (Do-It-Yourself) Guides For all DIYs. |
|
Thread Tools | Search this Thread |
12-19-2016, 11:06 AM | #57 |
TALLY FT86
Join Date: Mar 2014
Drives: 2014 FR-S Monogram -- SBD Turbo --
Location: Tallahassee, FL
Posts: 624
Thanks: 185
Thanked 444 Times in 241 Posts
Mentioned: 12 Post(s)
Tagged: 1 Thread(s)
|
Just installed these over the weekend... Feels Awesome! Definitely one of those, "should have come this way from the factory" things.
Noticeably improved rear end characteristics. Can feel the difference in all aspects (acceleration, braking , cornering). For the price, this is a must do mod (especially if you have done other suspension mods) Had a little trouble with the rear bolts like most, what worked for me was loosening all 4 corners, so i could wiggle the sub-frame to get the holes aligned. |
04-18-2017, 08:24 AM | #58 |
Senior Member
Join Date: Apr 2017
Drives: 2014 Subaru BRZ Limited 6MT SSM
Location: Atlanta, GA, USA
Posts: 293
Thanks: 195
Thanked 68 Times in 54 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Hey guys I installed these over the weekend and everything went fine except I ended up cross-threading the passenger rear bolt... Should've looked for other instructions instead of just following Whiteline's, these are better.
Anyway, I have an issue now where I get this *tink* noise whenever I turn and/or go over like little potholes. It's definitely coming from the rear. It kinda sounds like that tight metal noise you get when tightening lug nuts. I double checked that everything is tightened down and also the lug nuts were tight but the noise remains. Perhaps I didn't put enough grease? Any other ideas? Thanks |
04-19-2017, 02:24 AM | #59 |
Steve Bodalenko
Join Date: Mar 2013
Drives: Toyota 86 GTS
Location: Melbourne, Australia
Posts: 243
Thanks: 42
Thanked 53 Times in 39 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
This is very common, and not aligning the bolt PRECISELY, as you've seen, will result in a cross thread. To make it worse its a cross thread you don't realise has happened until you start tightening with tools. Another reason to never use pwr tools doing this job.
You can re tension the bolts to make sure they are still tight, remove the bolt and re tap with a M14x1.5 tap, re thread the bolt with a M14x1.5 die, or, if you're game, remove the offending bolt and pack it with washers before re installing it and tensioning. An idiot I paid to install mine actually cross threaded one bolt as it was nearly home, despite me warning him, and he used washers to pack the bolt out a little. Seems to have worked but I want to go the tap and die route eventually. There is also the possibility that what you're hearing is normal now you've stiffened the bushes. Your NVH is going to be worse. I also installed the diff bushes at the same time and there is now a very mechanical noise from the rear when I reverse or select a gear every now and then. This is a job that's a lot more hazadous than the written instructions and Youtube clips let on. Good luck |
04-19-2017, 08:20 AM | #60 |
Senior Member
Join Date: Apr 2017
Drives: 2014 Subaru BRZ Limited 6MT SSM
Location: Atlanta, GA, USA
Posts: 293
Thanks: 195
Thanked 68 Times in 54 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Do you think using this rental tool from AutoZone will work? http://m.autozone.com/loan-a-tools/t..._0_0?location=
Looks like the tap will be no where near long enough to get all the threads but I don't want to drop $25 on a long tap to be shipped to me next week since I'm autocrossing Sunday, I'd like to address it now. I also might try to find a longer one locally. I already had the diff inserts before these, and yes, while NVH has increased, this almost sounds like something is either loose or even overtightened. Like I said, when going over uneven road I get a *tink* noise from either or both sides of the rear. It's strange and unnerving. I'm going to work on the car today and hopefully fix it. Could also be my rear brakes since I just worked on those but I'm not sure. Will report back. Thanks |
07-15-2017, 07:14 PM | #61 | |
Senior Member
Join Date: Apr 2017
Drives: 2014 Subaru BRZ Limited 6MT SSM
Location: Atlanta, GA, USA
Posts: 293
Thanks: 195
Thanked 68 Times in 54 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
11-30-2017, 11:23 PM | #62 | |
Member
Join Date: Jan 2013
Drives: Argento FR-S
Location: San Diego
Posts: 77
Thanks: 17
Thanked 17 Times in 10 Posts
Mentioned: 1 Post(s)
Tagged: 1 Thread(s)
|
Quote:
As to the noise (if it's still happening), check the plastic cover that you had to remove from the passenger side to remove the top two bolts in this pic. It's held on with clips. I had to remove two of the clips in order to pull the cover back far enough to get to the bolts. When I put everything back together, I forgot one of the clips. The plastic would tap where the clip was missing and it sounded just like what you describe. It only did it over rough road or potholes. I hope this helps. 😎 Sent from my SAMSUNG-SM-G891A using Tapatalk |
|
12-19-2017, 08:25 PM | #63 |
Senior Member
Join Date: Feb 2014
Drives: 2023 BRZ
Location: Denver, CO
Posts: 1,816
Thanks: 1,490
Thanked 1,264 Times in 683 Posts
Mentioned: 34 Post(s)
Tagged: 2 Thread(s)
|
First, thank you for the excellent post.
Second, there seems to be a discrepancy between the torque specs in this thread (see picture in prior post) and what Whiteline says here. Anyone know which is correct? |
The Following User Says Thank You to Pat For This Useful Post: | Tristor (03-28-2018) |
12-20-2017, 12:49 PM | #64 | |
Senior Member
Join Date: May 2012
Drives: JRSC'd Asphalt FR-S
Location: SoCal
Posts: 1,317
Thanks: 868
Thanked 436 Times in 260 Posts
Mentioned: 9 Post(s)
Tagged: 1 Thread(s)
|
Quote:
buttt i would say that when I removed the bolts, they definitely didnt feel like 107lbft to me
__________________
IG: @OMGFRS
|
|
The Following User Says Thank You to Wes For This Useful Post: | Tristor (03-28-2018) |
12-20-2017, 02:06 PM | #65 |
Senior Member
Join Date: Feb 2014
Drives: 2023 BRZ
Location: Denver, CO
Posts: 1,816
Thanks: 1,490
Thanked 1,264 Times in 683 Posts
Mentioned: 34 Post(s)
Tagged: 2 Thread(s)
|
I thought the same thing. And the smaller ones sure didn't feel like 54.
|
12-25-2017, 04:32 PM | #66 |
Senior Member
Join Date: Aug 2016
Drives: BRZ
Location: Mendocino County
Posts: 369
Thanks: 7
Thanked 96 Times in 75 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Do you know what's really awesome? Reading all these posts on how easy it is when I can't even get the fucking thread started again. Now my car is undriveable how am I supposed to get to a shop? Just kill me. Never believing a diy again. Wasted so much money on torque wrenches and sockets
edit: I did it, but I'm going to leave my rage for all to see. It did not go smoothly. Use a creeper jack to align the subframe with the holes in the chassis. Use the screw jack to support the subframe that comes with your car to get the subframe pressed up against the chassis. God damn it that was frustrating Last edited by NRXRaptor; 12-25-2017 at 07:50 PM. |
The Following User Says Thank You to NRXRaptor For This Useful Post: | Chimera (05-15-2018) |
12-25-2017, 04:57 PM | #67 | |
Senior Member
Join Date: Sep 2016
Drives: 2017 manual BRZ
Location: USA
Posts: 467
Thanks: 322
Thanked 178 Times in 111 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Sent from my Pixel XL using Tapatalk |
|
12-26-2017, 03:08 AM | #68 | |
Senior Member
Join Date: May 2012
Drives: JRSC'd Asphalt FR-S
Location: SoCal
Posts: 1,317
Thanks: 868
Thanked 436 Times in 260 Posts
Mentioned: 9 Post(s)
Tagged: 1 Thread(s)
|
Quote:
__________________
IG: @OMGFRS
|
|
01-17-2018, 05:29 AM | #69 |
Senior Member
Join Date: Mar 2013
Drives: Toyota GTS 86
Location: Melbourne Australia
Posts: 243
Thanks: 21
Thanked 118 Times in 65 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
I'm removing my diff centre to install an LSD. Is this job easier to do with the diff in or out?
|
01-18-2018, 03:59 PM | #70 |
TALLY FT86
Join Date: Mar 2014
Drives: 2014 FR-S Monogram -- SBD Turbo --
Location: Tallahassee, FL
Posts: 624
Thanks: 185
Thanked 444 Times in 241 Posts
Mentioned: 12 Post(s)
Tagged: 1 Thread(s)
|
|
The Following User Says Thank You to Cockatoo For This Useful Post: | Hags86 (01-21-2018) |
|
|
Tags |
bushing, crossmember, diy, whiteline |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Adjustable Camber Arms vs. Whiteline Camber Bushings | digital_assassin | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 70 | 06-02-2013 06:06 AM |
Installed the Whiteline crossmember bushing(no pics sorry) | gmookher | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 10 | 01-26-2013 02:00 PM |
++PERRIN REAR SHIFTER BUSHINGS NOW IN STOCK! SPECIAL PRICING!++ | genometuning | Transmission and Driveline | 4 | 10-12-2012 09:23 PM |