Spec Twin? - Page 32 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Cueman · 10-08-2017, 01:52 PM

Quote:

Originally Posted by Twinz

I did not see a dyno graph with my SSC Koni's. Are we supposed to get one with them?

Oh... I felt like when GRM did their Facebook live video at Nats weekend, they announced that all package shocks would be dyno tested and come with a printed dynograph.

Twinz · 10-08-2017, 02:02 PM

Quote:

Originally Posted by Cueman

Oh... I felt like when GRM did their Facebook live video at Nats weekend, they announced that all package shocks would be dyno tested and come with a printed dynograph.

FWIW, I did notice that the mounting holes had marks as if they were mounted to something before they shipped to me.

M0nk3y · 10-08-2017, 03:49 PM

Quote:

Originally Posted by Cueman

Oh... I felt like when GRM did their Facebook live video at Nats weekend, they announced that all package shocks would be dyno tested and come with a printed dynograph.

Never heard of a dyno sheet being sent, but yes they should have been dyno tested prior to shipment.

iLuveKetchup · 10-10-2017, 12:23 AM

Some video from this past Sat. Complete SSC mods except exhaust & drop-in filter.

My run..
[ame="https://www.youtube.com/watch?v=-tFQymAaICM"]100717 NNJR Event #9 - YouTube[/ame]

NNJR test runs..
[ame="https://www.youtube.com/watch?v=deluZ62lnAQ"]NNJR SCCA SSC test runs - YouTube[/ame]

Bitters · 10-10-2017, 12:59 AM

What's everyone doing so far for wheels in SSC? Anything interesting that fits the spec nicely other than those listed on Tire Rack?

bholliday · 10-10-2017, 10:58 AM

Quote:

Originally Posted by Bitters

What's everyone doing so far for wheels in SSC? Anything interesting that fits the spec nicely other than those listed on Tire Rack?

Konig Ultraform 17x8 +40

Manufacturer's published weight: 16.94 lbs
Ron Williams posted a weight of 16.8 lbs on RoadraceAutoX (without valve stems or balancing weights).

Twinz · 10-10-2017, 11:18 AM

Quote:

Originally Posted by bholliday

Konig Ultraform 17x8 +40

Manufacturer's published weight: 16.94 lbs
Ron Williams posted a weight of 16.8 lbs on RoadraceAutoX (without valve stems or balancing weights).

As I mentioned before, I have a set of these and with TPMS and the center caps, they weigh 17lbs even. Balancing weights will add to that of course.

Ribface · 10-10-2017, 11:19 AM

Quote:

Originally Posted by iLuveKetchup

Some video from this past Sat. Complete SSC mods except exhaust & drop-in filter.

How did the car feel? Any thoughts on the SSC package?

Twinz · 10-10-2017, 11:20 AM

Quote:

Originally Posted by iLuveKetchup

Some video from this past Sat. Complete SSC mods except exhaust & drop-in filter.

How did the car feel?

*edit* Same question posted while I was typing I guess.

Jshreiner · 10-10-2017, 12:35 PM

Rules have been updated. Spacers and studs allowed and clarified, catback must weigh a minimum of 18lbs.

edit muffler and mid pipe must weight a minimumof 18lbs each

Bitters · 10-10-2017, 01:00 PM

Quote:

Originally Posted by Jshreiner

Rules have been updated. Spacers and studs allowed and clarified, catback must weigh a minimum of 18lbs.

edit muffler and mid pipe must weight a minimumof 18lbs each

so 18 combined or 36 combined for the whole catback system?

DaWorstPlaya · 10-10-2017, 01:19 PM

The stock catback supposedly weighs 38lbs.

Rule says:

Quote:

Weight – minimum, both muffler and midpipe (lbs.): 18

Bitters · 10-10-2017, 01:26 PM

Yeah, so either there are virtually no weight savings to be had by an exhaust upgrade, or the wording needs to be more clear that the muffer + midpipe = 18 lbs. min.

Jshreiner · 10-10-2017, 01:30 PM

the way i interpret it is they want the individual part to weight a minimumof 18lbs. they also removed the material specification as well.

10-10-2017, 12:35 PM	#444
Jshreiner Member Join Date: Jul 2017 Drives: Red frs and a few 90s celicas Location: Elkhart IN Posts: 16 Thanks: 0 Thanked 7 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Rules have been updated. Spacers and studs allowed and clarified, catback must weigh a minimum of 18lbs. edit muffler and mid pipe must weight a minimumof 18lbs each Last edited by Jshreiner; 10-10-2017 at 12:51 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Upgrading brakes on the lower spec GT86 (the standard spec outside of US market)	OnionTou	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	55	07-01-2016 02:36 AM
what's the difference between twin screw, centrifugal, single turbo and twin turbo?	warplane95	Forced Induction	86	04-17-2014 03:36 PM
my twin	RWDGUY	Mid-Atlantic	2	04-08-2013 10:23 PM
JDM Spec-C V9 Twin Scroll VF36 complete	Nico TURBO	Engine, Exhaust, Bolt-Ons	0	12-05-2012 12:20 PM

10-10-2017, 12:23 AM	#438
iLuveKetchup My VTEC fluid is full Join Date: Jan 2012 Drives: EFF JAY Location: NYC Posts: 935 Thanks: 149 Thanked 268 Times in 183 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Some video from this past Sat. Complete SSC mods except exhaust & drop-in filter. My run.. [ame="https://www.youtube.com/watch?v=-tFQymAaICM"]100717 NNJR Event #9 - YouTube[/ame] NNJR test runs.. [ame="https://www.youtube.com/watch?v=deluZ62lnAQ"]NNJR SCCA SSC test runs - YouTube[/ame]

10-10-2017, 12:59 AM	#439
Bitters Member Join Date: Sep 2017 Drives: Searching for next Location: Calgary Posts: 31 Thanks: 2 Thanked 6 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	What's everyone doing so far for wheels in SSC? Anything interesting that fits the spec nicely other than those listed on Tire Rack?

10-10-2017, 01:26 PM	#447
Bitters Member Join Date: Sep 2017 Drives: Searching for next Location: Calgary Posts: 31 Thanks: 2 Thanked 6 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Yeah, so either there are virtually no weight savings to be had by an exhaust upgrade, or the wording needs to be more clear that the muffer + midpipe = 18 lbs. min.

10-10-2017, 01:30 PM	#448
Jshreiner Member Join Date: Jul 2017 Drives: Red frs and a few 90s celicas Location: Elkhart IN Posts: 16 Thanks: 0 Thanked 7 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	the way i interpret it is they want the individual part to weight a minimumof 18lbs. they also removed the material specification as well.

User Name		Remember Me?
Password