OpenFlash Tablet: OTS v3.0 tune files ready for beta testing

[nikitopo]

Originally Posted by GT86Dan

I just emailed and thats how I got mine. Just provided what bin I needed and he sent me the tune files.

Originally Posted by Somerandom18

They are available just not on the website. As said 100 times send them an email requesting what tune you want with your bin. Here I'll make it easy.

Sales@openflashperformance.com

Thanks. I prefer to wait for the initial release together with the details of the changes.

[Breadman]

So I was looking at some logs from yesterday on my newly flashed 17 and it looks like I'm running slightly rich. Datazap seems to be having issues but im pretty sure it's in the range of 11.2-3 and and 11.4-6. it's noticably under the command afr line but I looked up the numbers and it doesn't look like they are unsafe.

Sent from my Nexus 6 using Tapatalk

[bababooey]

Originally Posted by Breadman

So I was looking at some logs from yesterday on my newly flashed 17 and it looks like I'm running slightly rich. Datazap seems to be having issues but im pretty sure it's in the range of 11.2-3 and and 11.4-6. it's noticably under the command afr line but I looked up the numbers and it doesn't look like they are unsafe.

Sent from my Nexus 6 using Tapatalk

I have similar afr numbers, off shelf tune. Its been said it isnt detrimental, just leaving a little power on the table (or shelf more specifically)

[steve99]

Originally Posted by Breadman

So I was looking at some logs from yesterday on my newly flashed 17 and it looks like I'm running slightly rich. Datazap seems to be having issues but im pretty sure it's in the range of 11.2-3 and and 11.4-6. it's noticably under the command afr line but I looked up the numbers and it doesn't look like they are unsafe.

Sent from my Nexus 6 using Tapatalk

17 ecu work different.


its got 2 open loop fuel tables and also a WOT AFR table.


I don't think the opensource guys have defined to WOT afr table but its about 12.5 afr.


I believe it runs the wot afr table till cat temps get to certain level then it defaults to the OL fuel tables. What values are in both your OL fuel tables ??

[Breadman]

Originally Posted by steve99

17 ecu work different.


its got 2 open loop fuel tables and also a WOT AFR table.


I don't think the opensource guys have defined to WOT afr table but its about 12.5 afr.


I believe it runs the wot afr table till cat temps get to certain level then it defaults to the OL fuel tables. What values are in both your OL fuel tables ??

Here we go. I did both looks with their diff vs stock and just stage 1 https://imgur.com/a/FzJne datazap still seems to be really slow and not working so i cant show you what im talking about

[Breadman]

finally got datazap to load. i live in the city so i dont really have places to drive hard but you can see from the brief few chances ive got it looks rich. also from the last one was my drive to work. well under the command afr the whole time https://imgur.com/a/vwr5f


so i figured out you can trim out values, so i trimmed anything over 16 from the afr and here are my logs from going to and from the store yesterday https://imgur.com/a/5zVLg

i have a perrin inlet hose for a sound generator delete, that wouldnt screw up my maf would it?

[Jasonb]

When ordering direct from open flash performance do they send out a shipping confirmation email? Ordered mine yesterday morning and have yet to get a shipping confirmation with tracking.

[steve99]

Originally Posted by Breadman

finally got datazap to load. i live in the city so i dont really have places to drive hard but you can see from the brief few chances ive got it looks rich. also from the last one was my drive to work. well under the command afr the whole time https://imgur.com/a/vwr5f


so i figured out you can trim out values, so i trimmed anything over 16 from the afr and here are my logs from going to and from the store yesterday https://imgur.com/a/5zVLg

i have a perrin inlet hose for a sound generator delete, that wouldnt screw up my maf would it?

can you just post up the web link for your datazap log then I can see it properly, make sure public box is checked


actually it looks like its about 11.5 AFR which isn't to far off the OL fuel tables A&B but rearly need to see the WOT or power AFR fuel table as well


you may not be able to trust the 'commanded AFR" logged parameter untill you see whats in the other tables




does you definition also have the WOT or Power AFR fuel table it looks like this but that a stock table your may be different





http://romraider.com/forum/download/...9291&mode=view

[Breadman]

http://datazap.me/u/gnuworldorder/lo...7?log=0&data=1 and http://datazap.me/u/gnuworldorder/lo...4?log=0&data=1 are the only logs i have. I live in the city and havent really been able to take it out on the highway yet. i can get the tables during lunch


just checked and i dont see any tables named that. is it possible im running an old xml definition file?

[steve99]

Originally Posted by Breadman

http://datazap.me/u/gnuworldorder/lo...7?log=0&data=1 and http://datazap.me/u/gnuworldorder/lo...4?log=0&data=1 are the only logs i have. I live in the city and havent really been able to take it out on the highway yet. i can get the tables during lunch


just checked and i dont see any tables named that. is it possible im running an old xml definition file?

I don't think the opensource guys have that WOT table defined yet


send me the tune and ill have a look in ecutek

[Jasonb]

Originally Posted by steve99

I don't think the opensource guys have that WOT table defined yet


send me the tune and ill have a look in ecutek

So what does that mean?

[Breadman]

Originally Posted by steve99

I don't think the opensource guys have that WOT table defined yet


send me the tune and ill have a look in ecutek

how exactly do i send it over to you?

[steve99]

Originally Posted by Breadman

how exactly do i send it over to you?

just attach it to post here , manage attachments

[Breadman]

here you go