Rays / Volk TE-37 bronze 16x7 , 5x100 +46 wheels $1600

[Adam_L]

$1450

Offered : a set of 4, Volk TE-37 forged wheels, 16 x7 size, 5x100 lug pattern (fits Subaru, Scion tC, xB2, FR-S to name a few) , +46 offset, 60mm center bore length. They only weigh 11.2 pounds per wheel ( lower weight is/ has always been higher performance ( in every industry, in just about every way) due mainly to better mpg and less un-sprung weight so you'll stop faster= which is a safety performance fact) ! Bigger isn't always better, don't settle for a 18+ lbs wheel. A proven performance wheel the last 20 years or so in motoring, this is the crem de la crem in regards to light/ strong/ great looking wheels. Go onto youtube, and type in "Rays wheel manufacturing" , and a 8-9 minute video will come up, to see how they go about producing one of the worlds top wheels in Japan. This wheel over the years tends to be bronze, or a powder coated white. There are some matte black time attack versions out there, but I think those were a limited 1-2 year project they did back 7-8 years ago.

Wheels are in great condition (no curb rash, etc), please see pictures. There is light grim/grease marks (spotted) that tarnished the clear coat on the wheels (from 10 years of use on a commuter car), so if you're not up for cleaning wheels on a weekly basis, this will happen. Please inspect pictures, zoom in you'll see the small spots. From 1-3 feet away you can notice it in the right light (not when rolling, or from further back). They retail for about $600 per wheel. Bronze center caps included, along with Rays blue anodized valve stems. I'd use the wheels, however I'm going a different route with my car project and these wheels don't fit the color scheme of what I'm trying to accomplish (more so a color thing, then anything else). My loss is someone elses gain, at a fraction of the new cost yet still tons of life left in these wheels. Would go great on blue (WRB) , or whiteout(white), as-fault (gray), or black, not sure on other color cars.

As an example for shipping cost, a member here inquired what shipping would be to NC. In checking Fed-Ex ground or UPS ground (either will be the lowest possible price), UPS with a AAA discount was the lowest. It's two boxes, each box is approx. 29 lbs , 18"x18" x 21" , and UPS ground would be $88 per box x2 = $176 total (so that is West coast, shipping to east coast, the max possible amount, unless you live in Vermont, could be possibly more there). I also know the more rural you are, shipping rates tend to be a bit higher.

[Adam_L]

bump, be bold... make me a realistic offer

[Adam_L]

bump, lowered the price to $1450 , would like to get right around that dollar mark. Also updated condition (road grim grease small spots) tarnished the clear coat on wheels. Still, functionality they look to be 9/10, cosmetically maybe 7-8 out of 10 but nothing major cosmetic that would affect functionality.

[Adam_L]

To the top, please make a reasonable offer. I don't want to have to put these on ebay by March-April....if they don't sell here by then

[Brzandt]

How is figment on these? I’m stock with eibach springs.
Not planning on bbk but curious if they would fit?
Would they be flush or inset to fender?

[jbravo373]

Originally Posted by Adam_L

To the top, please make a reasonable offer. I don't want to have to put these on ebay by March-April....if they don't sell here by then

Where in Cali are you located?

[B T]

Those will be inset to fender, even on stock height, I had the same set and they ride great. but they are 15 years old, just saying.

[Adam_L]

Yes, about 14 years old….and one of the highest quality forged wheels still out there in the game.

I never had tires on them. I bought them used about 2 years ago, slightly pre car buying, so I ended up with a different color car (was originally going to go WRB or white…. which would have been fine with this color of wheel).

[Brzandt]

I really wanted these. Couldn’t get a response so I ordered rpf1’s in bronze.

[SoloIIscoob]

Originally Posted by Brzandt

I really wanted these. Couldn’t get a response so I ordered rpf1’s in bronze.

What do you mean?

It looks like OP is responding to the thread just fine?

[SoloIIscoob]

PM sent

[Brzandt]

Originally Posted by SoloIIscoob

What do you mean?

It looks like OP is responding to the thread just fine?

Maybe you’ll have better luck. Could’ve been holidays or my pm’s messing up. Not real sure.

[SoloIIscoob]

Originally Posted by Brzandt

Maybe you’ll have better luck. Could’ve been holidays or my pm’s messing up. Not real sure.

TY for the heads up

[Adam_L]

sold today 1/11 . Please lock thread