WHAT DID YOU DO TO YOUR BRZ TODAY?

[NMBRzer]

Originally Posted by navanodd

This was a busy weekend!

- Michelin Pilot Sport A/S 3+ installed
- Oil/filter/airfilter/cabinfilter replaced
- Alignment check done
- Puny stock battery replaced with something that actually has some cranking amps
- Sony XAV-AX100 installed to replace the factory Pioneer AVIC-X9310BT that was the unicorn install 2013 Canadian BRZs received.

Interested to hear what you think of the tires. What size? I'm getting them installed today.

[navanodd]

Originally Posted by NMBRzer

Interested to hear what you think of the tires. What size? I'm getting them installed today.

Stock size, 215/45R17. 91W.

I'm happy so far. Don't have many miles yet. I've started the thread linked below and will be updating with impressions as I drive the car more.

http://www.ft86club.com/forums/showthread.php?t=118988

[NMBRzer]

Originally Posted by navanodd

Stock size, 215/45R17. 91W.

I'm happy so far. Don't have many miles yet. I've started the thread linked below and will be updating with impressions as I drive the car more.

http://www.ft86club.com/forums/showthread.php?t=118988

I'm going with 245/35R18. Hopefully pics tomorrow.
Unfortunately I won't get a chance to really drive it for a couple of weeks.

[NMBRzer]

Rays and Pilot Sport AS3+

[carsebuco]

Finally washed her after our 2.2k mile drive... And I forgot to take a new pic of her ass on base so I made it up with a Walmart parking lot, lol

[Vdub]

Today:

- Replaced stock air filter with Blitz drop-in filter.
- Replaced stock inlet tube with Perrin inlet tube
- Sound generator delete
- Perrin Oil Cap
- Perrin Battery Tie-Down

Very happy with the results, it all turned out great.



Before:


After:


Perrin Inlet Tube:


Perrin Oil Cap:


Perrin Battery Tie-Down:


Video showing before/after, install process, sound comparison, and commentary:
[ame="https://www.youtube.com/watch?v=UdHWOU13NWo"]FIRST ENGINE MODS! Perrin Inlet Tube + Filter 2017 Subaru BRZ - YouTube[/ame]

[DarkSunrise]

Originally Posted by Xxyion

Removed the Edelbrock, added JDL UEL header. No pics cuz i'm at work LOL

Just curious - why didn't you like the Edelbrock SC?

[DGMlJDlBRZ]

Added a TOM'S steering wheel...




And a Magna Instruments STI style gauge cluster face

[RSKYBZ]

First time on this side of the forum haha, well;

Just did tint *yay* 30% all around (minus the front windshield) def doesnt feel like a fish bowl anymore.

[BirdTRD]

Got a Father's day gift from my boy @Rifle . Now I need to pay a visit to Moto-East and get a taste of the corn juice! Thank you Daniel!

[TheRoops]

Originally Posted by DGMlJDlBRZ

Added a TOM'S steering wheel...




And a Magna Instruments STI style gauge cluster face

How much do the gauge clusters go for?

Sent from my SM-G950U using Tapatalk

[wolffbite]

Installed magnaflow cat-back exhaust, then went on a good cruise with some friends to burn off all the oil etc.



'09 RX-8, '17 BRZ, '95 Supra

[guybo]

Originally Posted by JGABBUAT

First time on this side of the forum haha, well;

Just did tint *yay* 30% all around (minus the front windshield) def doesnt feel like a fish bowl anymore.

Hood spacers.... There's a hook built in to the hinge of the hood. In a front end accident when the hood is shoved back toward the occupants, this hook catches a special piece of the unibody that keeps the hood from goiong through the windshield nd decapitating the occupants. Hood spacers move that hook so it can't catch anymore. The hood is designed to buckle in two and that hook and latch system is the key to YOU not losing your head.

It used to happen in older cars. Now it is very rare. Unless you use hood spacers to lower your underhood temps by 5 degrees.

[pinski]

Traded it in - I'm going to miss this car