Black badges for '17 86? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

zoltiz · 05-09-2017, 07:57 PM

So apparently Toyota changed the badge size and the black badge kits don't fit the '17 86. I don't like chrome anywhere on the car, so it's a quest to find OEM-ish black badge set. Front is 4.5" wide, rear is 3.5" wide. Don't have part numbers for OEM badges yet - 2017s are not showing up in parts catalogs yet, so can't match it to other Toyotas to extend the search.

Anyone had any luck or am I the weirdo wanting to replace those?

Impureclient · 05-09-2017, 08:43 PM

You're definitely a weirdo.

Chimera · 05-09-2017, 08:53 PM

Spray paint them. It's easy

cat94 · 05-09-2017, 09:00 PM

http://www.ft86speedfactory.com/cata...ta+Emblems+-+2

StraightOuttaCanadaEh · 05-09-2017, 09:23 PM

I used the Loden 86 emblem

zoltiz · 05-09-2017, 10:18 PM

Yeah, if the alternative is $70 or spraypaint, I might go for spraypaint.

Byza · 05-13-2017, 06:23 AM

Plastidip

cat94 · 05-14-2017, 11:42 PM

Quote:

Originally Posted by Byza

Plastidip

How many layers was this? And did the edges separate cleanly or did you have to do some cutting?

Tape in the middle is clever

Byza · 05-15-2017, 06:24 AM

I did 3 coats, 15 mins between coats, 1 hour before peeling. Edges came away clean but I tried not to get a thick coat around the corners, mostly spraying top down with light coats from each side to make sure the chrome was covered.

I don't know if you care about the fender garnish but it required more coats, 5 I think, to get a nice coverage. The spray can was also getting pretty light so probably wasn't coating as thick. The edges pulled the first time (right side) but I lightly touched it up with a paint brush. The left side I removed the paper straight after the final coat while it was wet to prevent pulling. The inner parts (vents) I just shifted the paper inwards a bit so the edges moved away and then removed it completely once it was dry. I'll be doing it again after I get an opti-coat so I might do up a quick DIY next time.

stevesnj · 05-15-2017, 11:21 AM

Very nice, I hate chrome on this car too and painted my badges on my '16

Borchert97 · 05-25-2017, 12:48 AM

Seems like FT86SpeedFactory has updated 2017 badges now.

http://www.ft86speedfactory.com/exte...6/emblems.html

05-09-2017, 08:53 PM	#3
Chimera Senior Member Join Date: Dec 2013 Drives: FRS Location: Atlanta Posts: 1,181 Thanks: 575 Thanked 291 Times in 216 Posts Mentioned: 17 Post(s) Tagged: 1 Thread(s)	Spray paint them. It's easy __________________ Car Journal: http://www.ft86club.com/forums/showthread.php?p=1513783

05-15-2017, 11:21 AM	#10
stevesnj Senior Member Join Date: May 2013 Drives: 2016 FR-S Oceanic Blue Location: Southern NJ Posts: 2,958 Thanks: 2,158 Thanked 1,601 Times in 923 Posts Mentioned: 30 Post(s) Tagged: 2 Thread(s)	Very nice, I hate chrome on this car too and painted my badges on my '16 __________________ My 2016 Build thread TRD Exhaust with custom quad tips, TRD Lowering Springs,TRD Quick shifter,LED;DRL, Projectors, and turn signals. Re-badge, 86 Nanny, WinmaxW2 Pads, K&N Drop In, Antenna delete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Black badges from the Hyper-Blue BRZ	Kostamojen	Cosmetic Modification (Interior/Exterior/Lighting)	14	06-23-2017 03:09 PM
OEM style badges, but black (not blue)?	ixobelle	Cosmetic Modification (Interior/Exterior/Lighting)	8	05-16-2017 05:20 PM
SCION BLACK BADGES	odessitik	Cosmetic Modification (Interior/Exterior/Lighting)	1	05-30-2015 03:41 AM
Black FR-S badges and emblems	godon2894	Scion FR-S / Toyota 86 GT86 General Forum	18	10-26-2014 10:18 AM
matte black toyota badges	Raven240	Cosmetic Modification (Interior/Exterior/Lighting)	8	07-31-2014 12:20 AM

05-09-2017, 08:43 PM	#2
Impureclient Banned Join Date: May 2015 Drives: 2015 FR-S Location: NPR, Florida Posts: 2,404 Thanks: 1,802 Thanked 2,903 Times in 1,282 Posts Mentioned: 25 Post(s) Tagged: 2 Thread(s)	You're definitely a weirdo.

05-09-2017, 09:00 PM	#4
cat94 Senior Member Join Date: Nov 2016 Drives: '17 86 Location: CA Posts: 198 Thanks: 91 Thanked 46 Times in 34 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	http://www.ft86speedfactory.com/cata...ta+Emblems+-+2

05-09-2017, 09:23 PM	#5
StraightOuttaCanadaEh Wes Join Date: Feb 2017 Drives: Artisan Spirits '17 86 Location: Toronto Posts: 2,868 Thanks: 1,249 Thanked 1,734 Times in 1,025 Posts Mentioned: 21 Post(s) Tagged: 0 Thread(s)	I used the Loden 86 emblem

05-13-2017, 06:23 AM	#7
Byza Member Join Date: Nov 2016 Drives: 2017 86 GTS Location: Australia Posts: 38 Thanks: 3 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Plastidip

05-15-2017, 06:24 AM	#9
Byza Member Join Date: Nov 2016 Drives: 2017 86 GTS Location: Australia Posts: 38 Thanks: 3 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I did 3 coats, 15 mins between coats, 1 hour before peeling. Edges came away clean but I tried not to get a thick coat around the corners, mostly spraying top down with light coats from each side to make sure the chrome was covered. I don't know if you care about the fender garnish but it required more coats, 5 I think, to get a nice coverage. The spray can was also getting pretty light so probably wasn't coating as thick. The edges pulled the first time (right side) but I lightly touched it up with a paint brush. The left side I removed the paper straight after the final coat while it was wet to prevent pulling. The inner parts (vents) I just shifted the paper inwards a bit so the edges moved away and then removed it completely once it was dry. I'll be doing it again after I get an opti-coat so I might do up a quick DIY next time.

05-25-2017, 12:48 AM	#11
Borchert97 Senior Member Join Date: May 2016 Drives: 2017 Toyota 86 Location: Kirkland, WA Posts: 206 Thanks: 24 Thanked 108 Times in 70 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Seems like FT86SpeedFactory has updated 2017 badges now. http://www.ft86speedfactory.com/exte...6/emblems.html

User Name		Remember Me?
Password