The New Invidia Gemini R400 Exhaust - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

MST Engineer · 03-17-2017, 03:17 PM

Anyone have this with a catless UEL header? Had q300 with my header and it was too quiet now have Nameless and it's to loud

Sent from my SHIELD Tablet K1 using Tapatalk

Vital · 03-17-2017, 03:47 PM

Quote:

Originally Posted by MST Engineer

Anyone have this with a catless UEL header? Had q300 with my header and it was too quiet now have Nameless and it's to loud

Sent from my SHIELD Tablet K1 using Tapatalk

Maybe this might help you out. Not my car, but found this on youtube.

[ame="https://www.youtube.com/watch?v=4N1ESdIJ1sg"]Toyota 86 Invidia R400 Exhaust (86/BRZ/FRS) - YouTube[/ame]

ajcarson11 · 03-17-2017, 04:09 PM

Quote:

Originally Posted by Vital

Maybe this might help you out. Not my car, but found this on youtube.

Hardly more quiet than an N1 it seems. I don't know why folks put up an exhaust video and then fill it with random shots and music...

Teseo · 03-17-2017, 04:35 PM

Quote:

Originally Posted by ajcarson11

Hardly more quiet than an N1 it seems. I don't know why folks put up an exhaust video and then fill it with random shots and music...

Maybe is a millennial trend

keb86 · 03-26-2017, 12:47 AM

Does this muffler sits low or it's just the angle of the picture?

JBezugs · 07-05-2017, 11:54 AM

With a little bit of extra hands courtesy of some friends, I was able to install the R400 very easily on Friday.

It sounds awesome. Plenty of volume but not too loud (quiets down nicely when cruising on the highway, no drone whatsoever), and has a nice, deep-tone to it which is the furthest thing away from ricey fartcan for me.

Definetly louder than the Q300, but not N1-obnoxious.

The catback itself looks very well constructed, and although I was worried about possible clearance issues with the rear mufflers (considering how they're positioned), it seems perfectly fine and I shouldn't run into any issues.

Only issue which seems to be prevalent with all 86/BRZ owners is some difficulty lining up the tips correctly. For me, after some adjustment, the passenger side still sits ever so slightly closer to the diffuser and inboard compared to the drivers side. Maybe a set of extended hangers should remedy the issue?

I'll get my DSLR, Shure mic and Tripod out later this week and record some sound clips for everyone!

JBezugs · 07-05-2017, 11:59 AM

Quote:

Originally Posted by keb86

Does this muffler sits low or it's just the angle of the picture?

The muffler does hang lower than stock, but it's not as bad as I was expecting. You lose about 3/4" over stock in terms of clearance, IIRC.

Clipdat · 07-05-2017, 12:30 PM

I'm glad it sounds good, but I really do not like how that looks from behind. The second canister sitting that low would bug me.

Somerandom18 · 07-11-2017, 02:03 PM

Anyone know how much it weighs?

Sent from my Pixel XL using Tapatalk

churchx · 07-12-2017, 02:51 AM

Quote:

Originally Posted by JBezugs

The muffler does hang lower than stock, but it's not as bad as I was expecting. You lose about 3/4" over stock in terms of clearance, IIRC.

Funnily .. but seeing lower diameter tubes inside of tips almost makes me wish to have exhaust WITHOUT large diameter end tips that each and every aftermarket exhaust has. It looks more function / less posing.

JBezugs · 07-12-2017, 10:48 AM

Quote:

Originally Posted by churchx

Funnily .. but seeing lower diameter tubes inside of tips almost makes me wish to have exhaust WITHOUT large diameter end tips that each and every aftermarket exhaust has. It looks more function / less posing.

Yeah, if the tips were double walled and or if they were able to mask/black out the lower diameter tubing in the muffler component, it would look better for sure. I may hit it with some high temp black down the road.

For those who are curious how it sounds without all the wub wub from ft86speedfactory's video (love you guys I swear!), here you go:

[ame="https://www.youtube.com/watch?v=DMIxiSNKsws"]Subaru BRZ - Invidia R400 Catback Exhaust (86/BRZ/FRS) - YouTube[/ame]

8RZ · 07-12-2017, 11:16 AM

Sounds pretty good.

Somerandom18 · 07-12-2017, 11:23 AM

Ordered this. Going to be running it with a catless unresonated fp on stock header (2017my)/overpipe for a while. Can't wait for UPS to show up with it. 😬

Sent from my Pixel XL using Tapatalk

toyotastic · 08-06-2017, 02:23 AM

Quote:

Originally Posted by JBezugs

Yeah, if the tips were double walled and or if they were able to mask/black out the lower diameter tubing in the muffler component, it would look better for sure. I may hit it with some high temp black down the road.

For those who are curious how it sounds without all the wub wub from ft86speedfactory's video (love you guys I swear!), here you go:

Where did you get yours from in GTA? Thinking picking one up myself

07-05-2017, 11:54 AM	#20
JBezugs Good Job Subaru! Join Date: Mar 2016 Drives: '24 CX-50 Meridian Location: Toronto, Ontario, Canada Posts: 355 Thanks: 146 Thanked 336 Times in 157 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	With a little bit of extra hands courtesy of some friends, I was able to install the R400 very easily on Friday. It sounds awesome. Plenty of volume but not too loud (quiets down nicely when cruising on the highway, no drone whatsoever), and has a nice, deep-tone to it which is the furthest thing away from ricey fartcan for me. Definetly louder than the Q300, but not N1-obnoxious. The catback itself looks very well constructed, and although I was worried about possible clearance issues with the rear mufflers (considering how they're positioned), it seems perfectly fine and I shouldn't run into any issues. Only issue which seems to be prevalent with all 86/BRZ owners is some difficulty lining up the tips correctly. For me, after some adjustment, the passenger side still sits ever so slightly closer to the diffuser and inboard compared to the drivers side. Maybe a set of extended hangers should remedy the issue? I'll get my DSLR, Shure mic and Tripod out later this week and record some sound clips for everyone! __________________ My (no longer Green) 2017 BRZ Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Invidia Gemini (R400)	Cubix	Engine, Exhaust, Transmission	18	08-01-2017 01:45 PM
INVIDIA >>SUPER SALE THREAD<< - Invidia N1 - Invidia Q300 - Invidia Front Pipes -	FT-86 SpeedFactory	Engine, Exhaust, Bolt-Ons	629	12-11-2016 10:21 PM
FS: Invidia Catless Front Pipe/ Invidia Q300 Exhaust Parts	timmydatooth	Engine, Exhaust, Bolt-Ons	27	04-04-2016 10:46 AM
WTB: Invidia Q300 Ti, TRD exhaust, or HKS Legamax Premium Exhaust	dwv619	Want-To-Buy Requests	3	02-08-2016 03:31 PM

03-17-2017, 03:17 PM	#15
MST Engineer Member Join Date: Jul 2013 Drives: '11 Subaru STI Location: Ann Arbor MI Posts: 47 Thanks: 0 Thanked 6 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Anyone have this with a catless UEL header? Had q300 with my header and it was too quiet now have Nameless and it's to loud Sent from my SHIELD Tablet K1 using Tapatalk

03-26-2017, 12:47 AM	#19
keb86 Member Join Date: Apr 2015 Drives: Toyota 86 Location: Philippines Posts: 16 Thanks: 7 Thanked 0 Times in 0 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Does this muffler sits low or it's just the angle of the picture?

07-11-2017, 02:03 PM	#23
Somerandom18 Senior Member Join Date: Sep 2016 Drives: 2017 manual BRZ Location: USA Posts: 467 Thanks: 322 Thanked 178 Times in 111 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Anyone know how much it weighs? Sent from my Pixel XL using Tapatalk

07-12-2017, 11:23 AM	#27
Somerandom18 Senior Member Join Date: Sep 2016 Drives: 2017 manual BRZ Location: USA Posts: 467 Thanks: 322 Thanked 178 Times in 111 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Ordered this. Going to be running it with a catless unresonated fp on stock header (2017my)/overpipe for a while. Can't wait for UPS to show up with it. 😬 Sent from my Pixel XL using Tapatalk

User Name		Remember Me?
Password