WHAT DID YOU DO TO YOUR BRZ TODAY?

[Humbleambulancedriver]

Crawford power blocks on my 17.
https://imgur.com/a/SPJqU

[norcalpb]

Originally Posted by DGMlJDlBRZ

Got tired of the JDM Spec Buddy Club tail lights and swapped them out with the new Valenti Revo Red lens/Matte Black housing tail lights.

Oh god those tails are sick!!!

Should I trade my Toms for these? Decisions decisions...

[justinco]

Originally Posted by canyons

SRP Racing Pedals for non-slip footing and better heel & toe.
Pedal Design "GRID" in black powder coat. The surface is highly textured. very grippy.

Those look really nice!

Where did you get them with the black counter-sunk holes? I only see them with silver bolt holes.

[canyons]

Originally Posted by justinco

Those look really nice!

Where did you get them with the black counter-sunk holes? I only see them with silver bolt holes.

======================
You can order them in a variety of surface textures and colors from the SRP website.

[Stang70Fastback]

I Ice Raced it!

[ame="https://www.youtube.com/watch?v=tq9krBZYNY8"]#GRIDLIFE IceBattle Winter AutoX (Night Run) - YouTube[/ame]

[NMBRzer]

Originally Posted by byun

Decided it's time for some safety




Sent from my iPhone using Tapatalk

Who makes the bar? Can the rear seat still be installed?

[Seabass47]

Flushed the diff and tranny finnally

[olsonpg]

Originally Posted by DGMlJDlBRZ

Got tired of the JDM Spec Buddy Club tail lights and swapped them out with the new Valenti Revo Red lens/Matte Black housing tail lights.

wait wait wait wait, how did you get the revos to look like that?

[Alltezza]

Originally Posted by olsonpg

wait wait wait wait, how did you get the revos to look like that?

I think they just started making them now.

http://www.ft86club.com/forums/showthread.php?t=115157

[DGMlJDlBRZ]

Originally Posted by olsonpg

wait wait wait wait, how did you get the revos to look like that?

Originally Posted by Alltezza

I think they just started making them now.

http://www.ft86club.com/forums/showthread.php?t=115157

Yep, what Alltezza said.

Newly released red lens/matte black housing Revos

[eromsdal]

Originally Posted by treminaor

Nope. There's currently no adapter on the market to make it work with the '16 harness. The AX-TOYUSB-1/2 will NOT work with a 2016 starlink Subaru.



I used the existing one for people with the square dashboard holes, so there's some gaps. It looks acceptable for the time being until someone releases ones made for the new dash style.

You don't need the dash kit to mount your radio to the car, so don't waste your money on it unless you don't mind the look.

Existing radio guides for the 2013-2015 BRZ will tell you to wire the blue power antenna wire on the Toyota Metra 70-1761 to your blue/white remote power (System Remote Blue/White on Pioneer decks) to turn on the door speaker amps. This is incorrect for 2016 models. You need to wire your blue/white remote power wire to the 9th pin (Brown wire) of the 28 pin data harness, which is the 3rd wire harness coming out of the car. This harness is for the backup camera, the integrated mic, the door amp power, and more.

For the reverse camera to work you need a voltage regulator to step down the 12v power from the car harness to 6v, the required voltage for the OEM rear view camera. I suggest buying this: Amazon.com: DROK® Waterproof High Efficiency Car Power Converter DC12V to 6V/3A Step Down Voltage Module 9-22V to 6V Power Supply: Electronics
Splice into your 12V accessory power wire to the red 12v INPUT wire of the regulator and wire the black ground wire to the black INPUT ground wire on the regulator. Wire the yellow 6v OUTPUT wire of the regulator to pin 11 of the 28 pin harness (this will power on the OEM camera). Wire the black OUTPUT ground wire to pin 22 of the harness (camera ground).

I removed the prewired RCA plug with pins on it from the useless AX-TOYCAM2 harness I had laying around... if you don't have that harness just cut up any old RCA cable and separate the copper ground from the signal wire inside of it. The signal wire is your + (pin 12) and the ground is your - (pin 13) - plug them into their respective holes on the 28 pin harness. I then plugged the other end of the RCA cable into the rear camera input of my Pioneer AVH-x8500BHS. Remember to go into your settings and change the Camera from "Off" to "Battery" (not "Ground"), and set the camera to NTSC under "Video Signal Options"

So to confirm, as I have a 16 brz as well... the back up camera can work with rewire and you can use a 2013-2015,2017 dash pieces would work to fill in the gap?

[eromsdal]

Not sure why it places the reply in this thread, I'm not used to using forums

[Prmspen]

Installed Perrin front end links. That's the last piece of my autocross setup for this year done. Also included Perrin 19mm adjustable front sway bar, OE camber bolts, and RE-71Rs. Having run bone stock last season, I'm looking forward to the first event.

[trigun286]

Switched maps on my OFT for e85. Got the butt dyno seal of approval. 😁

Sent from my Nexus 6P using Tapatalk