CEL P2097 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Zeuseidon · 11-26-2016, 10:05 AM

Little backstory. I have Gruppe-S Catless UEL header and overripe, JDL ultra quiet high flow front pipe, and Corsa Cat-back. Also Stage 2 93 OFT tune. Everything was runnin fine with this set up.

A couple months back I added a Perrin inlet tube, and freshly oiled K&N air filter. Around this time I started throwing P219a. It would come and go every tank or two of gas. Checked all seals around airbox and O2 sensor. Everything seemed good. Got some MAF cleaner and that seemed to do the trick.

Now I started throwing CEL P2097. My LTFT is 2.34 % at idle to about 6.25% when accelerating.Which I guess seems to be "acceptable" range? Also was under the car about a month ago changing diff and tranny fluid and checked for exhaust leaks. Looks like there may be some near the muffler (coupler loosened up is all) but that shouldn't be the cause of my code.

What should I check for next in the diagnosis progress?

Thanks in Advance

Apoc · 11-26-2016, 12:04 PM

P2097 is coming from your post cat heated oxygen sensor. The ECU is doing a second check on the oxygen level in the exhaust to adjust LTFT once you are in closed loop. The code is triggered when it detects continuous o2 readings higher than expected. I would check for leaks near or at the sensor also. I would wait and see if the code comes back.

Zeuseidon · 11-26-2016, 02:13 PM

Quote:

Originally Posted by Apoc

P2097 is coming from your post cat heated oxygen sensor. The ECU is doing a second check on the oxygen level in the exhaust to adjust LTFT once you are in closed loop. The code is triggered when it detects continuous o2 readings higher than expected. I would check for leaks near or at the sensor also. I would wait and see if the code comes back.

I rechecked the O2 sensor this morning. And was under the car within the last month. Did not see any leaks near the O2 sensor. I'm perplexed.

Zeuseidon · 12-06-2016, 10:52 AM

Update! There was a leak at the Exhaust gasket to overpipe. Damn bolt was completely missing!

Mazikowski · 12-06-2016, 11:38 AM

Quote:

Originally Posted by Zeuseidon

Update! There was a leak at the Exhaust gasket to overpipe. Damn bolt was completely missing!

Weight reduction!!!

11-26-2016, 10:05 AM	#1
Zeuseidon Member Join Date: Feb 2015 Drives: 2014 Sterling Silver BRZ Location: North Carolina Posts: 93 Thanks: 43 Thanked 41 Times in 27 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	CEL P2097 Little backstory. I have Gruppe-S Catless UEL header and overripe, JDL ultra quiet high flow front pipe, and Corsa Cat-back. Also Stage 2 93 OFT tune. Everything was runnin fine with this set up. A couple months back I added a Perrin inlet tube, and freshly oiled K&N air filter. Around this time I started throwing P219a. It would come and go every tank or two of gas. Checked all seals around airbox and O2 sensor. Everything seemed good. Got some MAF cleaner and that seemed to do the trick. Now I started throwing CEL P2097. My LTFT is 2.34 % at idle to about 6.25% when accelerating.Which I guess seems to be "acceptable" range? Also was under the car about a month ago changing diff and tranny fluid and checked for exhaust leaks. Looks like there may be some near the muffler (coupler loosened up is all) but that shouldn't be the cause of my code. What should I check for next in the diagnosis progress? Thanks in Advance Last edited by Zeuseidon; 11-26-2016 at 11:04 AM. Reason: Forgot Tune info

11-26-2016, 12:04 PM	#2
Apoc Senior Member Join Date: Jul 2012 Drives: Raven FR-S 6M Location: Calgary, Canada Posts: 638 Thanks: 348 Thanked 375 Times in 232 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	P2097 is coming from your post cat heated oxygen sensor. The ECU is doing a second check on the oxygen level in the exhaust to adjust LTFT once you are in closed loop. The code is triggered when it detects continuous o2 readings higher than expected. I would check for leaks near or at the sensor also. I would wait and see if the code comes back. __________________ “The World is Flat” [\|\|•]=(86)=[•\|\|]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
P2097 and P0451 JRSC C30 HBP - EcuTek Tuning	dj2020	Software Tuning	5	02-09-2016 03:46 AM
P2097	Cryptospook	Issues \| Warranty \| Recalls / TSB	7	05-18-2015 12:08 PM

12-06-2016, 10:52 AM	#4
Zeuseidon Member Join Date: Feb 2015 Drives: 2014 Sterling Silver BRZ Location: North Carolina Posts: 93 Thanks: 43 Thanked 41 Times in 27 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	Update! There was a leak at the Exhaust gasket to overpipe. Damn bolt was completely missing!

User Name		Remember Me?
Password