Todoroki Front Fenders

[nima314]

Have you got a front on pic?

Sent from my Nexus 6P using Tapatalk

[spitfire481]

Originally Posted by nima314

Have you got a front on pic?

Sent from my Nexus 6P using Tapatalk

I do not. We pulled 1.5 degrees of camber out of the fronts to get them to sit right with the new fenders. He was around 3.5 degrees up front on the stock fenders to sit flush

[nima314]

Sounds good. Have you got specs for the wheels?

Sent from my Nexus 6P using Tapatalk

[nima314]

Originally Posted by TylerLieberman

Todoroki's are the best for this car in my opinion. All the Rocket Bunny, Lux Motion etc etc stuff look like absolute sh*t to me. Tacked on, and don't even flow with the body lines. The only other ones that come close are Victory Function, but those are disgusting on these cars. They look way better on the Evo's.

In regards to the track width, I can't answer that. It all comes down to how much the track width is increased. When you increase track width, you're going to increase negative camber. To counter that, you'll have to adjust the camber plates to balance it out. By doing that, you'll find what works best to get the desired results.

And I'm driving a '16 STI now. Have had it for almost a year now.

Hey dude, so it says track width can't be increased by more than 25mm, thus no offsetting beyond 12.5mm each side. This means I can't widen with LCA's either.

I was wondering if I should get 18x10's and get a +46 offset rims, so that the rear is flush like a 9.5" would be as you said, and I can increase track width to +36 on the front with LCA's. It still pokes 13.7mm less than yours, but with a 9.5" it pokes 20mm less. But it will be 26.4mm closer to the strut:

http://www.willtheyfit.com/index.php...culate#content

Thanks man.

[Codythatsme]

Anyone fitted side skirts without the extension piece on these fenders? Wondering how it works, do you just have a piece of side skirt hanging there?

[jordonallison]

i check this thread every couple of months hoping for that new comment:

"hey guys! i know of a stateside vendor that stocks todoroki fenders! you dont have to pay a million dollars on shipping!"

but NOPE.. still not yet..

[jordonallison]

Finally..

[tato.valverde]

Originally Posted by jordonallison

Finally..

Attachment 140805

Where did you end up getting them? And for how much?

[jordonallison]

Originally Posted by tato.valverde

Where did you end up getting them? And for how much?

I ended up randomly hitting up TF Works after never seeing them in inventory on their online site. They just so happened to have a set with extensions laying around that i picked up for about $1450. I have no intentions of putting on the extensions anytime soon but i figured i couldnt pass these up, they were to my door in like one week. Imo these are the best addition to my car thus far.

Sent from my SM-N920P using Tapatalk

[Calbee]

Originally Posted by jordonallison

I ended up randomly hitting up TF Works after never seeing them in inventory on their online site. They just so happened to have a set with extensions laying around that i picked up for about $1450. I have no intentions of putting on the extensions anytime soon but i figured i couldnt pass these up, they were to my door in like one week. Imo these are the best addition to my car thus far.

Sent from my SM-N920P using Tapatalk

well if you ever sell them, hit me up first with the extension!

[protpibe]

Anyone interested in a set of Todoroki fenders? I'll be posting a for sale thread when I get home tonight. I originally wanted to sell them locally but everyone flaked, so it's time for them to go!

**Fenders only, no extensions.

Condition: Good
-light scuffing where the bumper meets the fender from bumper removal/installation
-1 very small screw hole per side where the extensions were screwed in to the bottom/front area (barely noticeable). If you're planning to order extensions separately, it's a non point and the holes will line up perfectly for an easy install.
-1 riv nut at the bottom rear of each fender where my side skirts bolted on. I will put a titanium bolt into the rivnut so it looks "finished" and not just a bare rivnut if you don't plan on getting these painted.
-These two small points are only relevant if your car is black. If you need to paint the fenders, it's a piece of cake to fill the small holes.

I'm just letting everyone know that ahead of time. They're extremely minor points, but I would rather you know ahead of time than open the box and be like wtf is this? The fenders themselves are otherwise perfect, painted/prepped professionally in Crystal Black Silica.

I'm looking for a quick sale @ $1,100 USD shipped. Money talks.... after being burned by a local I'm considering them sold to the first person that sends me cash via paypal.

These are $1500USD + $150 shipping from domestic websites, or about $900US + $620 shipping if you order direct from Japan. They're also a "made to order" part, so you will be waiting to get them. I waited about a month for mine, and I don't think anyone stocks them.

PM me if you're interested. The ad will go up tonight with pics

[8R6]

^damn helluva deal for anyone with a black car!!!

[protpibe]

Originally Posted by 8R6

^damn helluva deal for anyone with a black car!!!

Pretty good deal for non black cars too

[protpibe]

Originally Posted by protpibe

Anyone interested in a set of Todoroki fenders? I'll be posting a for sale thread when I get home tonight. I originally wanted to sell them locally but everyone flaked, so it's time for them to go!

**Fenders only, no extensions.

Condition: Good
-light scuffing where the bumper meets the fender from bumper removal/installation
-1 very small screw hole per side where the extensions were screwed in to the bottom/front area (barely noticeable). If you're planning to order extensions separately, it's a non point and the holes will line up perfectly for an easy install.
-1 riv nut at the bottom rear of each fender where my side skirts bolted on. I will put a titanium bolt into the rivnut so it looks "finished" and not just a bare rivnut if you don't plan on getting these painted.
-These two small points are only relevant if your car is black. If you need to paint the fenders, it's a piece of cake to fill the small holes.

I'm just letting everyone know that ahead of time. They're extremely minor points, but I would rather you know ahead of time than open the box and be like wtf is this? The fenders themselves are otherwise perfect, painted/prepped professionally in Crystal Black Silica.

I'm looking for a quick sale @ $1,100 USD shipped. Money talks.... after being burned by a local I'm considering them sold to the first person that sends me cash via paypal.

These are $1500USD + $150 shipping from domestic websites, or about $900US + $620 shipping if you order direct from Japan. They're also a "made to order" part, so you will be waiting to get them. I waited about a month for mine, and I don't think anyone stocks them.

PM me if you're interested. The ad will go up tonight with pics

Sold before I made a thread