Invidia full titanium catback - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Alltezza · 04-12-2016, 05:06 PM

Quote:

Originally Posted by 15limited

I'm not in the market for the cheapest exhaust I can find, I have considered the 60S tho.

Well I was jut pointing out that you can save money, and put that money that you saved elsewhere.

I also didn't even know Invidia made single exit Ti for our cars....I just bought an N1

axelthrasher · 07-28-2016, 03:38 PM

Not to bump and old or dead thread - but I picked up one of these and I am quite happy with the quality. I have had a JIC Magic on a WRX, and a Trust Greddy on my other WRX. I fitted this ti unit on my BRZ and the quality is pretty stellar. Most of the welds are above standard considering how difficult titanium is to work with. The welds don't appear to be machine welds, they appear to be hand-tigged. Once on the car (with OEM header and cat) it was quite a bit louder - some would enjoy this, but coming from UEL WRXs - this equal length sounds to Civicy/ricey for me. I popped the silencer in and WOW! Dead quiet at idle and basically OEM sounding with a little more bass in the exhaust note. What an addition this piece made! Weight savings through the roof too!

86Tony · 07-29-2016, 12:41 AM

Quote:

Originally Posted by KendallH

Why would you buy Invidia over a name brand like Tomei? The Tomei 80R is better quality and cheaper than this.

https://www.rallysportdirect.com/par...xhaust-type-80

ive seen both and owned a 60r. invidia titanium is actually higher quality then the tomei.

jay89 · 04-19-2017, 12:02 AM

Dont mean to bump and old thread but anybody has a sound clip of this exhaust?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Invidia N1 Catback w/ Titanium Tips	StarshipPoopers	Canada Classifieds	9	09-11-2015 08:22 AM
INVIDIA N1 CATBACK EXHAUST TITANIUM TIPS - FRS/BRZ	chjno86	Southern California	17	08-13-2014 11:53 AM
Invidia q300 catback titanium	Howardwei	Engine, Exhaust, Transmission	0	07-25-2013 08:30 PM
FS - Invidia N1 catback w/titanium tips	Captain Insano	Engine, Exhaust, Bolt-Ons	32	07-14-2013 07:37 PM
FS LI/NY: Invidia N1 Catback with Titanium tips	whitefrs	Engine, Exhaust, Bolt-Ons	14	03-31-2013 08:21 AM

07-28-2016, 03:38 PM	#16
axelthrasher Senior Member Join Date: Aug 2015 Drives: BRZ, 2 WRXs, 818S, motorcycles, etc Location: Saint Charles IL Posts: 178 Thanks: 0 Thanked 20 Times in 17 Posts Mentioned: 1 Post(s)	Not to bump and old or dead thread - but I picked up one of these and I am quite happy with the quality. I have had a JIC Magic on a WRX, and a Trust Greddy on my other WRX. I fitted this ti unit on my BRZ and the quality is pretty stellar. Most of the welds are above standard considering how difficult titanium is to work with. The welds don't appear to be machine welds, they appear to be hand-tigged. Once on the car (with OEM header and cat) it was quite a bit louder - some would enjoy this, but coming from UEL WRXs - this equal length sounds to Civicy/ricey for me. I popped the silencer in and WOW! Dead quiet at idle and basically OEM sounding with a little more bass in the exhaust note. What an addition this piece made! Weight savings through the roof too!

04-19-2017, 12:02 AM	#18
jay89 Junior Member Join Date: Apr 2017 Drives: Subaru Brz Location: Malaysia Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s)	Dont mean to bump and old thread but anybody has a sound clip of this exhaust?

User Name		Remember Me?
Password