HKS v3 supercharger

[Torry@HKSUSA]

Originally Posted by HuntingtonFRS

Has anyone done a BOV on this kit?


Sent from my iPhone using Tapatalk

It comes with a recirculated BOV. If you mean a *different* BOV, then I haven't heard of anyone trying to do it. Not that it couldn't be done, but there's not much reason to do it.

[HuntingtonFRS]

It's a Bypass Valve on it now. A little different.


Sent from my iPhone using Tapatalk

[Torry@HKSUSA]

Originally Posted by HuntingtonFRS

It's a Bypass Valve on it now. A little different.


Sent from my iPhone using Tapatalk

Not really. A recirculating BOV is the same thing as a bypass valve. HKS even refers to it as a BOV in the manual.

[Andew727]

Originally Posted by HuntingtonFRS

It's a Bypass Valve on it now. A little different.


Sent from my iPhone using Tapatalk

its different. and i added a tial recirculating BOV to mine directly after the compressor. check out my build on instagram @AndyB727. i also added a much larger intercooler with a vertical core

[HuntingtonFRS]

http://www.motoiq.com/MagazineArticl...cion-FR-S.aspx


Sent from my iPhone using Tapatalk

[HuntingtonFRS]

Originally Posted by Andew727

its different. and i added a tial recirculating BOV to mine directly after the compressor. check out my build on instagram @AndyB727. i also added a much larger intercooler with a vertical core

Do you have a video you can share or post on Instagram of the BOV?


Sent from my iPhone using Tapatalk

[Shinra Inc]

Originally Posted by Torry@HKSUSA

That's because we just added your ECU ID to the website yesterday

We are making the announcement later today for confirmed fitment through 2016 with the Flash Editor.

However, the Flash Editor is *not* able to overwrite the Ecutek flash. You must be running a stock ROM to use the HKS FE.

Oooooooo sneaky!

So the only required parts for the included tune would be the exhaust and spark plugs?

[Torry@HKSUSA]

Originally Posted by Shinra Inc

Oooooooo sneaky!

So the only required parts for the included tube would be the exhaust and spark plugs?

I'm assuming you meant to say tune, not tube. But yes.

[Andew727]

Originally Posted by HuntingtonFRS

Do you have a video you can share or post on Instagram of the BOV?


Sent from my iPhone using Tapatalk

car isnt finished yet but i will post everything to instagram and youtube as soon as its finished. ill list all my mods below.

-stg1
ecutek (james martin) tuned
HKS gt supercharger 100mm pulley
HKS s-type oil cooler
moto-east e85 kit
perrin lw crank pulley
fic injectors
dw65c fuel pump
ft86speedfactory headers
greddy cs gts ver2 cat back

**engine failure: valve spring cracked, valve guide chipped, and cam damage. i was lucky it happened at a redlight**

-stg2
90mm pulley & removing restictor plate
treadstone 26x10x3 vertical core intercooler
BC I beam connecting rods w/ arp extreme hardware
King rod bearings
stock cr pistons (rods required machine work for install)
Arp head studs & cosworth head gaskets
GSC Ti valve springs retainers
valve job
omni 3 bar map sensor
Tial 50mm BOV
TRD baffled oil catch can
custom intercooler piping
act 6 puck clutch kit with heavy duty pressure plate and LW flywheel
mtec shift springs w/ trd shifter kit
perrin shifter bushing w/ tranny support
all fluids replaced with redline

[Andew727]

Question, hoping someone may have an answer for this.

so these kits use a draw through MAF not a blow through MAF. i have noticed most guys mount their BOV's closest to the intake manifold/furthest from the MAF sensor. i am waiting to hear back from evasive to see if you have to do this or not because my original BOV location thought was going to be directly after the compressor for a great sound and i would be shortening the lengthy recirculating tube to about 3 inches instead of it being 6 feet long.

please help if you have any knowledge on this pre or post intercooler mounting of BOV's on a centrifugal set up.

[Shinra Inc]

Originally Posted by Torry@HKSUSA

I'm assuming you meant to say tune, not tube. But yes.

Yep. Oops. Thanks.

[Timmy_Jones]

Anyone install the kit at home, with the HKS tuner and email the, for the 93 octane tune? I run 93 only and was hoping they could ship the tuner, with the 93 tune already loaded on it.

[zeal86]

Originally Posted by Timmy_Jones

Anyone install the kit at home, with the HKS tuner and email the, for the 93 octane tune? I run 93 only and was hoping they could ship the tuner, with the 93 tune already loaded on it.

That would be nice for those in areas where 93 is readily available but I believe you would have to get with an HKS pro dealer for a 93 tune.

__________________________________________


projekt zeal86 build

zeal.eightsix Facebook

Instagram | zeal.eightsix

[Timmy_Jones]

Pro-Dealer for me is almost two hours away...agreed, wish I could just get the 93 octane loaded up on the tuner.

Originally Posted by zeal86

That would be nice for those in areas where 93 is readily available but I believe you would have to get with an HKS pro dealer for a 93 tune.