FR-S Fog Kit, $150! BRZ Glass Fogs, $100! See Install Video! Ships Same Day!

[Ghost_86]

Sweet. Can the top part of the light be tied into the side turn signal to blink simultaneously? And then still use the bottom fog light/LED to stand alone and operate separately for the 2015 models?

[Diode Dynamics]

Originally Posted by Ghost_86

Sweet. Can the top part of the light be tied into the side turn signal to blink simultaneously? And then still use the bottom fog light/LED to stand alone and operate separately for the 2015 models?

Send an email to: contact@diodedynamics.com for more information

Thanks

[Diode Dynamics]

Diode Dynamics is pleased to announce a new color for our popular XML2 fog light -YELLOW (3000K)! The XML2 utilizes genuine CREE XML2 components, for a true, measured output of 1,420 lumens. 100% plug-and-play. Sizes available include 9005, 9006, H8, H10, H11, H16, and PSX24W.

Thanks!
Nick C.

[Ghost_86]

I need help with the fog light installation on my 2015 LRS. I watched the video that shows the power relay cords for the positive and negative wires being connected to the headlights, by just removing the headlight connector and slicing it into the black and red wires. Unfortunately, my LRS came with HID Xenon projectors and NOT the older halogen projectors. So the wires for the headlights are not just a simple red and black wire, I actually have several wires for the headlight connector on the 2015 HID Xenon headlights. So I have no idea which wire is positive and which wire is negative because there are so many different colors. I have 6 wires on the xenon headlight connector. 1)Fat red (I believe this is the + power) 2) Regular smaller red and white stripe 3) Two black and white striped wires 4) Solid brown wire and 5) One solid black wire (I believe this is the negative power wire). Does anyone know for sure? I don't want to splice into the wrong wire by mistake.

[Diode Dynamics]

Any positive 12V source will do. You can actually tap into the parking lights as well!

Feel free to send us an email for more installation tips: contact@diodedynamics.com

Thanks!
Nick C.

[StOpNG0x]

Question... Do you sell just the foglight assembly? A rock hit mine and blew out the glass lens and bulb.

[Diode Dynamics]

Originally Posted by StOpNG0x

Question... Do you sell just the foglight assembly? A rock hit mine and blew out the glass lens and bulb.

Of course! We also have complete LED replacement housings available if you are looking for more output:



http://www.diodedynamics.com/store/c...category/1446/

Nick C.

[Diode Dynamics]

Customer Submitted photo with Yellow XML2 Installed

Nick C.

[aegisdrgn]

Originally Posted by Diode Dynamics

The Type A has different mounts and a flat lens vs. the angled lens on the Type B

They come with adapters to plug in directly to the factory socket.

Send an email to: contact@diodedynamics.com for more information

Thanks,
Nick C.

Hello Diode Dynamics, I think there was a mistake in my Luxeon shipment. The included plug adapters are roundish and I think they are H11, because I can't plug it into my stock 2015 BRZ foglight harness. Do I have to purchase a pigtail (like this: [ame="http://www.amazon.com/iJDMTOY-Pigtail-Sockets-Conversion-Retrofit/dp/B00CZDHFHQ"]Amazon.com: (2) iJDMTOY 5202 to H11 Pigtail Sockets Wires For Subaru BRZ Scion FR-S Fog Lamps Conversion Retrofit: Automotive[/ame]) to connect the Luxeon fog lights to my stock harness?
You can PM me or call me about it, my order number is 11287950. Thanks!

[Diode Dynamics]

Originally Posted by aegisdrgn

Hello Diode Dynamics, I think there was a mistake in my Luxeon shipment. The included plug adapters are roundish and I think they are H11, because I can't plug it into my stock 2015 BRZ foglight harness. Do I have to purchase a pigtail (like this: Amazon.com: (2) iJDMTOY 5202 to H11 Pigtail Sockets Wires For Subaru BRZ Scion FR-S Fog Lamps Conversion Retrofit: Automotive) to connect the Luxeon fog lights to my stock harness?
You can PM me or call me about it, my order number is 11287950. Thanks!

Hello Waylan,

Please send an email to: contact@diodedynamics.com and our customer service team will assist you. It's possible you will need the H16 connector for your BRZ

Thanks!
Nick C.

[aegisdrgn]

Originally Posted by Diode Dynamics

Hello Waylan,

Please send an email to: contact@diodedynamics.com and our customer service team will assist you. It's possible you will need the H16 connector for your BRZ

Thanks!
Nick C.

Thanks, Nick, I will give it another shot!

[Diode Dynamics]

Originally Posted by aegisdrgn

Thanks, Nick, I will give it another shot!

We will get you fixed up!

Thanks,
Nick C.

[carczar_84]

Nick, I purchased some of the full replacement led housings, but it looks like they don't have the proper connectors? Are they suppose to come with them, am I missing something?

Any help would be great, thanks!

[Diode Dynamics]

Originally Posted by carczar_84

Nick, I purchased some of the full replacement led housings, but it looks like they don't have the proper connectors? Are they suppose to come with them, am I missing something?

Any help would be great, thanks!

Please give our customer service team a call and we will provide you with more assistance: (314) 205-3033

Thank you,
Nick C.