my interior re-design - Page 27 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Jive Turkey · 09-21-2015, 11:04 PM

Quote:

Originally Posted by MemphisR

How did you wrap the door panels plastic 'perforated' section? I assume you just glued it on there. How do the edges look? could I see a picture of them?

its glued on.

sure, i got my finished door pulls in so i have to take photos anyways

nova.86 · 01-26-2016, 02:46 AM

Amazing, I'd love to get a blue push start button located where you have yours, and to move my seat warmers up to where you got them. It's a shame the aventador push button is $2,500. I wonder if there's any cheap alternatives out there that accomplish the same and look pretty similar. I mean the material can't be worth that much lol.

BDotG · 02-16-2016, 04:49 PM

So amazing, been working on some of my own interior mods lately and the center console has got my attention. Can you explain the rough process of how you filled in the coin tray and molded that cubby? Was it just a matter of bonding a plastic cup like piece to it and then using fiberglass filler to do the rest?

Jive Turkey · 03-11-2016, 01:03 AM

basically cut apart OEM mount, cut circle in middle to make it fit and glued down the cut off piece that hold the button in place. it just so happens to be the height to make it flush. after resin set it in place and the button was in the direction you want (facing you) i filled it with bondo type fiber glass. sanded and did that a few times. Then sent to jason to wrap.

Final pullstrap kit done, can order on Overland-designs.com

BDotG · 04-01-2016, 12:27 PM

So inspired by your console I set out to do my own

Thanks for all the inspiration. Need to get on the alcanatra wrapping soon.

lbroskee · 04-01-2016, 12:35 PM

Quote:

Originally Posted by BDotG

So inspired by your console I set out to do my own

Thanks for all the inspiration. Need to get on the alcanatra wrapping soon.

let the fighting with passenger begin

BDotG · 04-01-2016, 01:00 PM

Quote:

Originally Posted by lbroskee

let the fighting with passenger begin

Passengers can hold their own drink

This is mainly for my morning commute coffee haha

SlammedSilly · 04-01-2016, 02:33 PM

this interior is awesome... i think the best part is the door handles! i give you mad props my man, hopefully you have something planned for the back!

Jive Turkey · 04-04-2016, 12:24 AM

Quote:

Originally Posted by BDotG

Passengers can hold their own drink

This is mainly for my morning commute coffee haha

That is an awesome idea! i really want a functional clean looking cupholder...sigh.

Quote:

Originally Posted by SlammedSilly

this interior is awesome... i think the best part is the door handles! i give you mad props my man, hopefully you have something planned for the back!

half cage

Irace86 · 04-04-2016, 02:01 AM

Quote:

Originally Posted by Jive Turkey

That is an awesome idea! i really want a functional clean looking cupholder...sigh.

There is one in each door and two in the console. If you have the OEM armrest, just lift it up until it locks.

Nice interior. Can't say I get the pull straps, but I like the rest.

Jive Turkey · 04-04-2016, 11:06 AM

Quote:

Originally Posted by Irace86

There is one in each door and two in the console. If you have the OEM armrest, just lift it up until it locks.

Nice interior. Can't say I get the pull straps, but I like the rest.

place hot or iced coffee in the doors see what happens its really only good for bottle which i almost never have, i drink A LOT of coffee. Armrest is super inconvenient for passengers, i don't like when the armrest is open. i'll probably finish my e90 retrofit soon

BDotG · 04-04-2016, 06:16 PM

Quote:

Originally Posted by Jive Turkey

place hot or iced coffee in the doors see what happens its really only good for bottle which i almost never have, i drink A LOT of coffee. Armrest is super inconvenient for passengers, i don't like when the armrest is open. i'll probably finish my e90 retrofit soon

That was my thinking. Everything is inconvenient in this car. I use the center console under the arm rest for my fire extinguisher. Would have loved to have found a way to make an additional cup holder somewhere but one should do for now.

Irace86 · 04-04-2016, 07:01 PM

Quote:

Originally Posted by Jive Turkey

place hot or iced coffee in the doors see what happens its really only good for bottle which i almost never have, i drink A LOT of coffee. Armrest is super inconvenient for passengers, i don't like when the armrest is open. i'll probably finish my e90 retrofit soon

Gotcha. Yea we always drink from homemade tea that we bottle. And when we do have drinks I just pop the armrest and hand it to her.

The pullstraps kinda look interesting considering a door strap is weight savings for an arm rest and door grab.

sloehiro · 10-30-2016, 08:07 PM

Any update on the cup holders??

01-26-2016, 02:46 AM	#366
nova.86 Legendary Member Join Date: Aug 2015 Drives: HyperBlue BRZ Location: Oxnard, CA Posts: 365 Thanks: 138 Thanked 180 Times in 90 Posts Mentioned: 2 Post(s)	Amazing, I'd love to get a blue push start button located where you have yours, and to move my seat warmers up to where you got them. It's a shame the aventador push button is $2,500. I wonder if there's any cheap alternatives out there that accomplish the same and look pretty similar. I mean the material can't be worth that much lol. __________________ Insta:@Nova.86 Build Thread

02-16-2016, 04:49 PM	#367
BDotG Senior Member Join Date: Jan 2015 Drives: Asphalt 2013 FR-S Location: Vancouver, BC Posts: 253 Thanks: 38 Thanked 126 Times in 73 Posts Mentioned: 2 Post(s)	So amazing, been working on some of my own interior mods lately and the center console has got my attention. Can you explain the rough process of how you filled in the coin tray and molded that cubby? Was it just a matter of bonding a plastic cup like piece to it and then using fiberglass filler to do the rest? __________________ Build Thread: http://www.ft86club.com/forums/showthread.php?t=87104 // Save the fenders

04-01-2016, 12:27 PM	#369
BDotG Senior Member Join Date: Jan 2015 Drives: Asphalt 2013 FR-S Location: Vancouver, BC Posts: 253 Thanks: 38 Thanked 126 Times in 73 Posts Mentioned: 2 Post(s)	So inspired by your console I set out to do my own Thanks for all the inspiration. Need to get on the alcanatra wrapping soon. __________________ Build Thread: http://www.ft86club.com/forums/showthread.php?t=87104 // Save the fenders

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DCW Carbon Fiber interior items! Center console Plaques / Interior panels	doggy	Interior Parts (Incl. Lighting)	143	10-11-2013 11:17 AM
LED interior conversion kits (interior), USA stock & warranty	WTF	Interior Parts (Incl. Lighting)	0	05-22-2013 10:17 PM
Video: Toyota FT-86 II Concept Design Explained by "Dezi" Nagaya (Design Manager)	Hachiroku	Scion FR-S / Toyota 86 GT86 General Forum	58	04-11-2011 09:03 PM

03-11-2016, 01:03 AM	#368
Jive Turkey the tuna, no crust. Join Date: Oct 2012 Drives: 2014 Hachiroku of the year Location: jersey Posts: 2,299 Thanks: 874 Thanked 1,770 Times in 761 Posts Mentioned: 78 Post(s)	basically cut apart OEM mount, cut circle in middle to make it fit and glued down the cut off piece that hold the button in place. it just so happens to be the height to make it flush. after resin set it in place and the button was in the direction you want (facing you) i filled it with bondo type fiber glass. sanded and did that a few times. Then sent to jason to wrap. Final pullstrap kit done, can order on Overland-designs.com

04-01-2016, 02:33 PM	#372
SlammedSilly Senior Member Join Date: Jul 2015 Drives: 2015 Ultramarine FR-S Location: Philadelphia, PA Posts: 382 Thanks: 550 Thanked 51 Times in 46 Posts Mentioned: 5 Post(s)	this interior is awesome... i think the best part is the door handles! i give you mad props my man, hopefully you have something planned for the back!

10-30-2016, 08:07 PM	#378
sloehiro Junior Member Join Date: Jan 2014 Drives: 2013 DGM Subaru BRZ MT Location: NC Posts: 1 Thanks: 0 Thanked 2 Times in 1 Post Mentioned: 0 Post(s)	Any update on the cup holders??

User Name		Remember Me?
Password