DIY: iJDMTOY LED DRL Foglight Bezel Install - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JDM FRS · 06-29-2013, 01:02 AM

Here you go! It's my first DIY Video so go easy on my! I also kept calling the glovebox a toolbox for some reason. The total time on the install if you go through the firewall and make everything look pretty is about 2.5 hours if you take your time. If I were to do the install again I'd say it would take about half that. And I cant get the "auto stabilization thing" to go away

Oh and the inspiration/power routing idea came from @FR-Shadow

[ame]http://youtu.be/19kW9Lzj6K4[/ame]

Bt216 · 06-29-2013, 01:37 AM

Nice!! They're really bright

JDM FRS · 06-29-2013, 01:49 AM

it might just be the exposure on my camera lol. they kinda aim down though which is good lol

JDM FRS · 06-29-2013, 01:19 PM

Oh yeah with the blue going to green wire of the high beam the LED Bezel will be low when the DRLs are on and high when the headlights are on

l0aded · 07-01-2013, 03:28 PM

These DRL strips confuse me. Are they OEM or just fit perfectly? I went to the dealer and he said he thought they were OEM for 2014 as an option too.

JDM FRS · 07-01-2013, 07:14 PM

Quote:

Originally Posted by l0aded

These DRL strips confuse me. Are they OEM or just fit perfectly? I went to the dealer and he said he thought they were OEM for 2014 as an option too.

From what people are saying they are a regional item. The set I got from ijdmtoy aren't OEM they just fit the bezel perfectly. The way they set up there is no switch or anything so they don't function like a fog light. They just look awesome Imo

Sent from my HTC VLE_U using Tapatalk 2

JDM FRS · 08-07-2013, 03:08 PM

Lol thanks for the special mention ijdmtoy

http://store.ijdmtoy.com/Scion-FR-S-...ghts-a/556.htm

invaliduser · 08-09-2013, 11:04 AM

Installed these yesterday and I do like.
There is an open slot in the fuse box with accessory power (near the wiper fuse if I remember correctly). A spade connector fits in nice and snug. Much easier than running into the cab for power.
I think (personal opinion) the LEDs are too bright at 100%. I will likely wire the blue wire to the same accessory power slot for 50% brightness all the time.

FRSBRZGT86FAN · 12-31-2015, 07:09 PM

Quote:

Originally Posted by invaliduser

Installed these yesterday and I do like.
There is an open slot in the fuse box with accessory power (near the wiper fuse if I remember correctly). A spade connector fits in nice and snug. Much easier than running into the cab for power.
I think (personal opinion) the LEDs are too bright at 100%. I will likely wire the blue wire to the same accessory power slot for 50% brightness all the time.

What amp fuse did you use in that accessory power fuse slot?

invaliduser · 12-31-2015, 07:27 PM

Quote:

Originally Posted by FRSBRZGT86FAN

What amp fuse did you use in that accessory power fuse slot?

https://goo.gl/photos/KPp3i4s9ibLRDQK18

Sent from my Nexus 6P using Tapatalk

FRSBRZGT86FAN · 12-31-2015, 07:50 PM

Quote:

Originally Posted by invaliduser

https://goo.gl/photos/KPp3i4s9ibLRDQK18

Sent from my Nexus 6P using Tapatalk

thanks!

NABoxer · 03-26-2016, 12:14 PM

Quote:

Originally Posted by invaliduser

Installed these yesterday and I do like.
There is an open slot in the fuse box with accessory power (near the wiper fuse if I remember correctly). A spade connector fits in nice and snug. Much easier than running into the cab for power.
I think (personal opinion) the LEDs are too bright at 100%. I will likely wire the blue wire to the same accessory power slot for 50% brightness all the time.

Kind of reviving this from the dead but how long was the install? I'll be likely doing it this way since going to the fuse box seems much easier than inside the cabin. Any problems since then? And I agree I would like the dim output throughout.

Quote:

Originally Posted by invaliduser

https://goo.gl/photos/KPp3i4s9ibLRDQK18

Sent from my Nexus 6P using Tapatalk

I see the picture but I'm a noob when it comes to electrical stuff, but could you tell me the actual fuses you use?

Thanks so much!

invaliduser · 03-26-2016, 12:16 PM

Quote:

Originally Posted by NABoxer

Kind of reviving this from the dead but how long was the install? I'll be likely doing it this way since going to the fuse box seems much easier than inside the cabin. Any problems since then? And I agree I would like the dim output throughout.

I see the picture but I'm a noob when it comes to electrical stuff, but could you tell me the actual fuses you use?

Thanks so much!

That is a blank spot for a fuse. Just use a spade connector to push in to that spot.

And no issues since original install. I autocross once a month and never had a problem.

Sent from my Nexus 6P using Tapatalk

NABoxer · 03-26-2016, 01:51 PM

Quote:

Originally Posted by invaliduser

That is a blank spot for a fuse. Just use a spade connector to push in to that spot.

And no issues since original install. I autocross once a month and never had a problem.

Sent from my Nexus 6P using Tapatalk

Thanks!
Just received mines and no blue wire for dim option kind of bummed hopefully they send me a new set of wires. Must be the new version.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zeta Performance - High-power LED Strip DRL Kit - Foglight Bezel Replacement	ZetaPerformance	Exterior Parts - Lighting	16	06-30-2016 05:40 AM
Zeta Performance - High-power LED Strip DRL Kit - Foglight Bezel Replacement	ZetaPerformance	Cosmetic Modification (Interior/Exterior/Lighting)	0	03-13-2013 01:26 PM
Carbon Fiber Foglight Bezel	JonMotoring	Exterior Parts - The Rest	0	02-10-2013 05:51 PM
Removing the HU Bezel	Xdragonxb0i	DIY (Do-It-Yourself) Guides	1	02-05-2013 08:20 PM

06-29-2013, 01:37 AM	#2
Bt216 Senior Member Join Date: May 2013 Drives: Scion frs Location: Cleveland,oh Posts: 99 Thanks: 0 Thanked 26 Times in 15 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Nice!! They're really bright

08-09-2013, 11:04 AM	#8
invaliduser Senior Member Join Date: Sep 2012 Drives: 2017 86 Location: Louisiana Posts: 176 Thanks: 45 Thanked 50 Times in 28 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Installed these yesterday and I do like. There is an open slot in the fuse box with accessory power (near the wiper fuse if I remember correctly). A spade connector fits in nice and snug. Much easier than running into the cab for power. I think (personal opinion) the LEDs are too bright at 100%. I will likely wire the blue wire to the same accessory power slot for 50% brightness all the time.

User Name		Remember Me?
Password