SCCA Solo C Street Discussion

[AlanLGuy]

Originally Posted by 86_Freak

I was planning on installing my TRD springs this weekend, but if they are truly putting the non-TRD in DS, I'll scrap that plan and stay on OEM springs and be an overdog in DS.

Might as well put them on. At this point, any change would be for next year, not this year.

[DaWorstPlaya]

Originally Posted by SeanRTR

Open the box. This is ridiculous. Just Make a clause putting these two cars on the same line for SCCA Street class. I don't get how this hurts anyone else. "Scion FR-S/BRZ are on the same line in Street and may interchange anything within model years including TRD spring additions currently only allowed for Scion Models." ...or something along those lines.

....

If you follow Andy Hollis, you'll know what I mean. If 2 or more manufacturers come out with identical chassis but use different port installed options, you could have a case of people cherry picking the ideal combination of port installed options to build a franken car. Said car could have a huge advantage to any other car manufacturer that doesn't have access to all these cross manufacturer port options. Thus you start with one model that has slightly less weight, slightly better gear box and then start picking options from the other manufacturers that has slightly better spring and sway bar port installed options. Quickly that car becomes the must have car in the class. Thus Pandora's box.

On the other hand if you start to put exception to certain cars into the rule book, the rule book becomes enormously large and tedious to read as you try to accommodate every special case. The rules have to be written in a general manner that accommodates all cars without being specific or at least that's what I've been told.

As Andy and some of the other old timers would says, the rules aren't designed around YOUR specific car. They have to take every other car into consideration. Honestly I don't envy them.

[qoncept]

Originally Posted by DaWorstPlaya

Thus Pandora's box.

Isn't there an exception or some special rule for spec Miatas?

[Jawnathin]

Originally Posted by AlanLGuy

I agree. Looking at the DS times from Nats last year, the FR-S/BRZ look like clear overdogs to me.

Last year was not a good year to try to compare speed between classes. Many classes ran wet, the weather was all over the place. It rained HARD on 2/3rd of the DS guys on Day 1.

[Locust]

Registering for contingencies... yay. Going to try to make more than just local events this year so maybe I'll see some of you guys around?

[86_Freak]

Originally Posted by Locust

Registering for contingencies... yay. Going to try to make more than just local events this year so maybe I'll see some of you guys around?

I just got my Scion/TRD decals in the mail. Trying to figure out how I want to deal with the "SCION" decal for the front of the car. I'm putting all my other decals on magnetic material so I can take them off between events. I wonder if they'd be okay with the "SCION" decal on the roof just above the windshield......

[Locust]

Originally Posted by 86_Freak

I just got my Scion/TRD decals in the mail. Trying to figure out how I want to deal with the "SCION" decal for the front of the car. I'm putting all my other decals on magnetic material so I can take them off between events. I wonder if they'd be okay with the "SCION" decal on the roof just above the windshield......

Negatory.

[AlanLGuy]

Originally Posted by 86_Freak

I just got my Scion/TRD decals in the mail. Trying to figure out how I want to deal with the "SCION" decal for the front of the car. I'm putting all my other decals on magnetic material so I can take them off between events. I wonder if they'd be okay with the "SCION" decal on the roof just above the windshield......

Just make sure you wax it first and throw it on the hood or front bumper, they come off easy enough and the residue cleans up quickly with a bit of goo gone

[edj]

or put the SCION decal on static cling material.

[Gen3MR2]

February 2016 Fastrack
Page 2
#18376 Koni struts for twins

http://cdn.growassets.net/user_files...pdf?1453302259

I contacted Koni and they said they are sending out the spacer washers and instructions to get it to the correct spec.

[Locust]

Originally Posted by Gen3MR2

February 2016 Fastrack
Page 2
#18376 Koni struts for twins

http://cdn.growassets.net/user_files...pdf?1453302259

I contacted Koni and they said they are sending out the spacer washers and instructions to get it to the correct spec.

Some people have already gotten theirs I believe

[AlanLGuy]

Originally Posted by Locust

Some people have already gotten theirs I believe

I got mine last week, however they sent it through the USPS and didn't put enough stamps to cover postage... So I had to pick it up at the Post Office and pay 72 cents...to get it.

[Locust]

Can someone please tell me which of these Scion/TRD/Toyota decals I have to run if I'm running Scion Racing contingency? I have TRD x 4 (the only small ones), Scion Racing x 4 (they're like 6" tall and a foot wide...), gigantic 2 foot long SCION x 4, Powered by Toyota x 2, and Toyota x 2...

Can I only run Scion decals if I'm doing Scion Racing contingency or can I mix and match as I see fit as long as there are 2 on each side and one on the front?

[edj]

1) 2 ft SCION decal on the front of the car ( on the hood)
2) Scion Racing decals, 1 on each side of the car
3) TRD decals, 1 on each side of the car