FT-86 SpeedFactory Diffuser by Verus - Complete Aero Solution - Page 31 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Takumi788 · 12-08-2015, 08:03 AM

Finally pried myself away front the new house and ordered the aggressive rear diffuser. Can't wait to see it.

socal_48 · 12-08-2015, 10:08 AM

Quote:

Originally Posted by megamarines

Do you have anymore pics? I've got an RS 1.0 as well and I'm curious to see other angles.

I dont have any other angles but I can take more pics maybe next week.

Scracho · 12-14-2015, 08:05 PM

Quote:

Originally Posted by Bach415

@NotEric6 Any ETA on the Type-80 diffuser?

Quote:

Originally Posted by NotEric6

Trying to have it done by end of year but my plate is fairly full from now till then. I'll do my best.

How's that plate of yours?

The86Ghost · 12-29-2015, 11:43 PM

Do you think the greddy evo 3 would fit?

VerusEric · 12-30-2015, 12:10 PM

Quote:

Originally Posted by Scracho

How's that plate of yours?

Extremely full. Going to try and work it in this weekend.

Quote:

Originally Posted by The86Ghost

Do you think the greddy evo 3 would fit?

The Greddy Evo IV fit, barely. Comparing the two exhausts from pictures online, I would assume the Evo 3 will fit.

VerusEric · 01-04-2016, 01:08 PM

Loud noises! More photos to come.

VerusEric · 01-12-2016, 04:26 PM

Well, we finished everything up and below are the results. Please let us know if you have any questions. We will work on getting some kits made up in the next few weeks. The kit will include templates and a few pieces of hardware.

Installed without making any noise from exhaust hitting the diffuser.

The cuts necessary to allow the diffuser to fit well, with the proper angle for best performance. We did not want to go any further towards the ground for fear of scrapping too often. At stock ride height, there is a little over 6" from ground to diffuser.

Templates cut out and placed on diffuser to show how they aid in install/cutting. We will have installation instructions to accompany the kit. The templates are a good starting point but when installing the exhaust I found there is significant play and adjustment in how one could install the Type 80 exhaust, so ultimately you'll want to use the templates as a guideline and not a final answer.

Thanks,
Eric

Carlitoz3 · 02-03-2016, 02:44 AM

I must be blind, where can I find the instructions to install the front splitter?
Ft86speedfactory only has a link for the upgraded splitter part of the instructions. Loving my new rear diffuser!

BRZtoni · 02-21-2016, 04:04 PM

Excited to get my diffuser

SPCorBUST · 02-21-2016, 04:11 PM

Quote:

Originally Posted by BRZtoni

Excited to get my diffuser

did you get aggressive or non-aggressive?

we still need that photoshoot buddy

BRZtoni · 02-21-2016, 04:45 PM

Quote:

Originally Posted by SPCorBUST

did you get aggressive or non-aggressive?

we still need that photoshoot buddy

Non aggro.

My car stock cant look too crazy

Call me when ur ready bro. Im getting my front lip repainted

VerusEric · 03-01-2016, 01:16 PM

Photo dump from various customers:

Still frame from tuft testing:

BRZtoni · 03-01-2016, 01:54 PM

installing today <3

TicoWalrus · 03-01-2016, 04:09 PM

@VeloxEric Does this diffuser by any chance fit with the Buddy Club Spec II? List on ft86 doesn't have it as confirmed fit, but it also isn't in the list of those that don't fit.

01-04-2016, 01:08 PM	#426
VerusEric Join Date: Mar 2015 Drives: BRZ, STI, GT350R, Supra, 987.2 Location: Indiana Posts: 1,146 Thanks: 567 Thanked 2,529 Times in 780 Posts Mentioned: 87 Post(s) Tagged: 3 Thread(s)	Loud noises! More photos to come. Last edited by VerusEric; 01-04-2016 at 01:24 PM.

02-21-2016, 04:04 PM	#429
BRZtoni Turbo E85 Join Date: Sep 2013 Drives: 13 wrb brz Location: torrance, ca Posts: 1,093 Thanks: 172 Thanked 555 Times in 349 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	Excited to get my diffuser __________________ Flex Fuel Turbo BRZ

03-01-2016, 01:54 PM	#433
BRZtoni Turbo E85 Join Date: Sep 2013 Drives: 13 wrb brz Location: torrance, ca Posts: 1,093 Thanks: 172 Thanked 555 Times in 349 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	installing today <3 __________________ Flex Fuel Turbo BRZ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just Ordered the Complete StopTech Brake Package from FT86 SpeedFactory	naikaidriver	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	28	02-28-2017 03:48 PM
Single-Exit Exhaust Diffuser/Hole Problem... Solution!	Anthony	Cosmetic Modification (Interior/Exterior/Lighting)	75	10-13-2016 08:40 PM
Front Wheel Deflectors - FT-86 SpeedFactory by Verus Engineering	VerusEric	Cosmetic Modification (Interior/Exterior/Lighting)	25	09-22-2016 02:41 AM
DriveWay Labs Rear Diffuser - FT-86 SpeedFactory	FT-86 SpeedFactory	Cosmetic Modification (Interior/Exterior/Lighting)	435	01-15-2015 08:20 AM

12-29-2015, 11:43 PM	#424
The86Ghost Senior Member Join Date: Apr 2014 Drives: 2014 FRS (Whiteout) Location: New York Posts: 118 Thanks: 3 Thanked 21 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Do you think the greddy evo 3 would fit?

01-12-2016, 04:26 PM	#427
VerusEric Join Date: Mar 2015 Drives: BRZ, STI, GT350R, Supra, 987.2 Location: Indiana Posts: 1,146 Thanks: 567 Thanked 2,529 Times in 780 Posts Mentioned: 87 Post(s) Tagged: 3 Thread(s)	Well, we finished everything up and below are the results. Please let us know if you have any questions. We will work on getting some kits made up in the next few weeks. The kit will include templates and a few pieces of hardware. Installed without making any noise from exhaust hitting the diffuser. The cuts necessary to allow the diffuser to fit well, with the proper angle for best performance. We did not want to go any further towards the ground for fear of scrapping too often. At stock ride height, there is a little over 6" from ground to diffuser. Templates cut out and placed on diffuser to show how they aid in install/cutting. We will have installation instructions to accompany the kit. The templates are a good starting point but when installing the exhaust I found there is significant play and adjustment in how one could install the Type 80 exhaust, so ultimately you'll want to use the templates as a guideline and not a final answer. Thanks, Eric

02-03-2016, 02:44 AM	#428
Carlitoz3 Senior Member Join Date: Apr 2013 Drives: 2013 MT Asphalt FRS Location: Baldwin Park, CA Posts: 1,051 Thanks: 237 Thanked 235 Times in 157 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I must be blind, where can I find the instructions to install the front splitter? Ft86speedfactory only has a link for the upgraded splitter part of the instructions. Loving my new rear diffuser!

03-01-2016, 01:16 PM	#432
VerusEric Join Date: Mar 2015 Drives: BRZ, STI, GT350R, Supra, 987.2 Location: Indiana Posts: 1,146 Thanks: 567 Thanked 2,529 Times in 780 Posts Mentioned: 87 Post(s) Tagged: 3 Thread(s)	Photo dump from various customers: Still frame from tuft testing:

User Name		Remember Me?
Password