SOCAL: Local FS/FT

[BRZedsDeadBaby]

bump

Originally Posted by BRZedsDeadBaby

$450 obo

Purchased from Titan Motorsports back in October 2014.

Reason for selling: too quiet for my tastes; bought a Borla catback.

The axle back portion and tips are in excellent condition. The flange and resonator on the midpipe is scraped up due to my car being low. The resonator was leaking but now has a thick weld by a reputable exhaust shop.

Local pick up or meet up only
PM or hit me up @ 714 468 34SevenZero

[2broke4turbo]

Originally Posted by yip

Bumping this!

you still have the lowering springs?

[yip]

Originally Posted by 2broke4turbo

you still have the lowering springs?

PM sent!

[azynneo]

Have a set of te37SL black edition w/ hankook v12s 18x9.5(these are perfect and only 2 months old) 265/40/18 wanting to trade for some rpf1 black 18x9.5 + cash (must be in excellent condition)

[br@ndon]

Cusco strut bar 140
Radium dual catch can 350
Tein type flex coilivers 750 (about 8k miles)
Spl lower control arms 460
Works bell hub 150
Works bell quick release 315
Sparco r383 steering wheel (NEW) 200
Sparco left driver side seat base 120
Buddyclub seat rails frs 130
Tomei type 80 870 (slight scrape over speed bump, no dent)
Circuit sports hood damper frs 70
Mcgard lug nuts frs spec 75
Toms tail lights (JDM) 385
Beat sonic drl mod (NEW) no box 50
Project mu club racer brake pads FRONT/REAR 320 (90% left)

562 310 six five seven 2

http://imgur.com/a/7f1wi

Most of the items come with original boxes and are in very good condition.

[br@ndon]

H&R Lowering springs - $140

[Binary_fission]

Originally Posted by Binary_fission

FS: Wedssport sa72r 18×9.5 +45 5x100
Hankook v12 evo2 255/40/18
Wheels and tires used in good condition
Asking $900 firm

For more info follow link below.
http://losangeles.craigslist.org/lac...407836132.html

Bump
Willing to trade for other aftermarket parts

Sent from my SM-N910T using Tapatalk

[sti4thewin]

Once again need to get rid of these. Perfect condition and letting them go for $80 now.
off a 2015 brz

[FRS-Learner]

Originally Posted by FRS-Learner

I have a set of BNIB Winjet clear Fog Lights.

Price: $70 cash only



Located: Cal Poly Pomona, can travel within 5 miles to neighboring cities. (Walnut, Covina, Pomona, Diamond Bar).



Text for a faster response: (925)- 895- 0075

BUMP!


Sent from my iPhone using Tapatalk

[Evasive Motorsports]

Got some 18x9.5 +40 te37sl blow out price. give me a call at 626-336-3400

-Josh

[sdemo]

Originally Posted by Evasive Motorsports

Got some 18x9.5 +40 te37sl blow out price. give me a call at 626-336-3400

-Josh

color?

[Evasive Motorsports]

Originally Posted by sdemo

color?

only diamond black, dark gunmetal and mag blue.

need to call for pricing. too low to pm or email

626-336-3400

-Josh

[FRS Johnny]

For sale or trade

Injen Intake
OEM oil pan with welded oil return bung for boosted applications.

Looking to sell or trade quick!

[robot]

$75

This is a cluster that I purchased on ebay and modified in minor ways to make work for a project of mine (Replace the speedo with a dual needle oil temp/oil pressure gauge. If you are interest in that I can give you all the details, code, etc.).

It is not guaranteed to work. I suspect it will, but I have never tested it. I own a brz and I'm in the process of selling it.

Here are the ways I have tinkered with it:
-Desoldered the stepper motor for the speedo. I have since soldered it back. The excess flux is subaru/denso's doing and not my mess. The contacts should be good.
-Disassembled and reassembled everything several times.
-Increased the hole size (by about 1 mm) where the shaft of the stepper comes through the pcb. This did not affect the contacts or lighting in any way. I had to do this to accommodate the specialized stepper motor with two shafts for two needles for my project.
-Cut the shaft off the speedo needle (needed to add a 3d printed shaft to fit the stepper from the project). I have since reglued the shaft to the needle.

Why you might buy this:
-ECU hacking
-Parts for something messed up on yours
-Making a racing sim setup
-Picking up where I left off from my project
-A last ditch effort to replace your speedo on your project.
-To build a clock in
-To hang as decoration in your house/shop/garage/workplace.