Ground Control Camber Plates - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jmimac351 · 01-15-2016, 07:32 PM

FOR SALE: $300 including shipping

I purchased these Ground Control camber plates in Oct 2015 from a good friend who originally bought them in Dec 2014. I actually bought them before I purchased my BRZ recently. I won't be putting coilovers on the car anytime soon so I need a different setup. These won't work with stock shocks unless you have a coilover conversion kit, which Ground Control also sells.

If you look closely at the pictures, you'll notice they have a very handy modification with a thru bolt / set screw setup that keeps the bearing from suddenly moving when loosened and doing an alignment. This allows you to fine tune the camber setting easily.

jmimac351 · 01-25-2016, 10:32 PM

...

xxGiXxeRxx · 01-30-2016, 09:44 PM

Will this work with a KW V3 coilover? And does this let you adjust caster too?

jmimac351 · 01-30-2016, 10:44 PM

Quote:

Originally Posted by xxGiXxeRxx

Will this work with a KW V3 coilover? And does this let you adjust caster too?

These were used on a car with Racecomp Tarmac 2 coilovers, which are based on the KW Clubsport coilover. I'm not an expert on these different fitments but "I think" they will work on your KW shocks. When you order these from Ground Control you select KW shock and 2.5" spring. Assuming you have 2.5" springs on your KW's, I don't see why they won't. It wouldn't hurt to call KW to make sure.

You can adjust camber and caster.

See the picture below and check your spring size.

Robbie · 01-31-2016, 01:22 PM

You'd need the 60 mm perch, which you could buy from GC. They adjust caster and camber.

tumbla.jr · 02-02-2016, 12:02 PM

Are these compatible with st's

killerkid08 · 02-02-2016, 09:19 PM

PM'D

jmimac351 · 02-03-2016, 08:53 PM

Quote:

Originally Posted by tumbla.jr

Are these compatible with st's

I don't know. Best bet is to contact the vendor of your shocks to confirm. Reference the spring perch measurement in the picture I posted and note that 2.25" and 60mm spring perches can also be acquired from Ground Control.

jmimac351 · 02-08-2016, 10:21 AM

***SOLD***

01-15-2016, 07:32 PM	#1
jmimac351 Chin Chief Instructor Join Date: Jan 2015 Drives: 2015 Ford F150 Aluminium Couch Location: Apopka, FL Posts: 134 Thanks: 38 Thanked 104 Times in 54 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Ground Control Camber Plates FOR SALE: $300 including shipping I purchased these Ground Control camber plates in Oct 2015 from a good friend who originally bought them in Dec 2014. I actually bought them before I purchased my BRZ recently. I won't be putting coilovers on the car anytime soon so I need a different setup. These won't work with stock shocks unless you have a coilover conversion kit, which Ground Control also sells. If you look closely at the pictures, you'll notice they have a very handy modification with a thru bolt / set screw setup that keeps the bearing from suddenly moving when loosened and doing an alignment. This allows you to fine tune the camber setting easily. __________________ 2015 Subaru BRZ 2008 NC Miata with 2.5 swap Building 1963 289 Cobra Le Mans Replica Cobra Replica Build Pics Chin Chief Instructor www.ChinTrackDays.com

01-25-2016, 10:32 PM	#2
jmimac351 Chin Chief Instructor Join Date: Jan 2015 Drives: 2015 Ford F150 Aluminium Couch Location: Apopka, FL Posts: 134 Thanks: 38 Thanked 104 Times in 54 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	... __________________ 2015 Subaru BRZ 2008 NC Miata with 2.5 swap Building 1963 289 Cobra Le Mans Replica Cobra Replica Build Pics Chin Chief Instructor www.ChinTrackDays.com

01-30-2016, 09:44 PM	#3
xxGiXxeRxx Member Join Date: May 2014 Drives: 2014 FRS Location: Texas Posts: 63 Thanks: 3 Thanked 19 Times in 12 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Will this work with a KW V3 coilover? And does this let you adjust caster too? Last edited by xxGiXxeRxx; 01-30-2016 at 09:59 PM.

02-08-2016, 10:21 AM	#9
jmimac351 Chin Chief Instructor Join Date: Jan 2015 Drives: 2015 Ford F150 Aluminium Couch Location: Apopka, FL Posts: 134 Thanks: 38 Thanked 104 Times in 54 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	*SOLD* __________________ 2015 Subaru BRZ 2008 NC Miata with 2.5 swap Building 1963 289 Cobra Le Mans Replica Cobra Replica Build Pics Chin Chief Instructor www.ChinTrackDays.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ground control Camber plates	-Phil	Brakes, Suspension, Chassis	13	01-14-2016 08:08 AM
FS: RCE Tarmac 2 Clubsport coilovers, Ground Control Camber Plates/rear mounts	gatorac	Brakes, Suspension, Chassis	5	08-25-2015 02:31 PM
Ground Control Camber Plates and Eibach R2	ReThink	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	2	04-20-2014 10:54 PM
Testing Waters: FS KWV3s with Ground control camber plates and robispec rear mounts	YDNA	Brakes, Suspension, Chassis	0	01-25-2014 03:34 AM
Vorshlagg plates (vs) ground control thoughts and question	OICU812	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	1	09-05-2013 03:23 AM

01-31-2016, 01:22 PM	#5
Robbie In the slipstream Join Date: Mar 2013 Drives: BRZ Location: Broomfield, CO Posts: 79 Thanks: 0 Thanked 42 Times in 29 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	You'd need the 60 mm perch, which you could buy from GC. They adjust caster and camber.

02-02-2016, 12:02 PM	#6
tumbla.jr taicho Join Date: Sep 2014 Drives: The rEd Fr-S Location: Wpb Posts: 331 Thanks: 68 Thanked 99 Times in 64 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	Are these compatible with st's

02-02-2016, 09:19 PM	#7
killerkid08 Cool Stuff Join Date: Feb 2013 Drives: Cool Car Location: Kennesaw, GA Posts: 486 Thanks: 57 Thanked 100 Times in 78 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	PM'D

User Name		Remember Me?
Password