|
||||||
| Issues | Warranty | Recalls / TSB Problems, issues, recalls, TSBs |
 |
|
|
Thread Tools | Search this Thread |
01-21-2016, 10:36 PM
|
#1 |
|
Member
Join Date: Dec 2015
Drives: 2013 Subaru brz limited
Location: pinellas park, FL
Posts: 26
Thanks: 2
Thanked 10 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 2 Thread(s)
|
PLEASE READ (has been stated before)
I spent a few days trying to track down my "evap large leak detected" "incorrect flow purge valve" and i searched the forums and found nothing, there were a few guys that were boosted who were blowing a vacuum lines underneath the plennum which connected to the (you guessed it!) purge valve. i just want to post this cause the line going under felt the plennum felt pretty snug so i passed by it and kept looking. So as a heads up just check it. Hopefully others can get an answer from this.
Pretty straight forward on getting to it, Remove belt and intake hose. Remove two bolts on the front of the A/C compresspor and a 3rd behind it. All 3 being a 14mm! easy access after that. I hope this helps someone later on!!! l |
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stated Value Insurance | ogrowup | Scion FR-S / Toyota 86 GT86 General Forum | 4 | 11-29-2014 01:12 PM |
| ******* READ THIS NOW! ******* READ THIS NOW! ******* READ THIS NOW! | Dave-ROR | Exterior Parts (Aero, Lighting, Etc.) | 0 | 04-14-2014 07:48 PM |
