Crashdummy's Release Series 1.0 build

[Crashdummy]

Originally Posted by NARFALICIOUS

The bug screen idea is a good one. Nice build so far

I've done that on all my cars, my 05 Corolla has 365,000 on it and the conderser looks practically new.

[DannyQ86]

Nice man! Is that the mustang 3rd brake light you are going to use to replace the oem one?

[Lonewolf]

The black wheels are going to look killer...can't wait

[Crashdummy]

Didn't have a chance to post the progress over the last few days, so here is stuff that was done.

Echomaster Backup Camera - Done
Gentex Auto-Dimming Mirror with Homelink Compass & Temp - Done
Rear Fog Light - 1/2 Done
INTEC 3rd Brake Light Relocate - Done
TRD Aero Stabilizing Trunk Cover - Done
Custom 8 Ball Shift Knob - Done
Toyota Front Arm Rest - Done
Apply Clear Paint Protection film to the lower door panels, sil plates and a few other places - Done
Custom Decepticon Emblems - Done
TRD Rims 18x7.5 Square - Done
Michelin Pilot Super Sports Tires 245/35 ZR18 - Done
Destroy Seat Belt Chime - Done

Items to install at a later date:

Rear Window Spoiler
Rear Arm Rest
Courtesy lights in doors
Custom Ghost Lights in doors


Echomaster Backup Camera





Follow indentation on the left side for where to drill the hole for the camera






Drill and moun the camera (sorry no pic)
Mount the trunk garnish and run your wires to the back of the radio (I included the wire for the rear fog light in my run to the front)











Head Unit Wiring





You must add a pin into slot 2 of the 28 Pin connector on the back of the radio and wire it to the reverse light circuit, IP J/B Connector 3D Pin 4, to kick on the monitor.

The wires for the back-up camera get hooked up to Acc and Ground. I used the Blk/Lt Blue wire in pin 7 for Ground and Red pin 3 for Acc (connector is below the one on the left)






IP J/B Wiring





Plug in the connector they give you that has the Video plug





Assemble, turn Acc on and put in reverse to test

Success!





Gentex Auto-Dimming Mirror with Homelink Compass & Temp


Adaper install
Best to use blue lock-tite on all 3 screws so they done vibrate loose




Mount the mirror and wire.

Connector for ACC power and Ground is near the light in the headliner, reach up and to the right and you should get it. Its a three pin connecctor, wrapped in grey foam, 2 pins are ground ,1 pin ACC. Wire up the ground to the middle ground wire and the red and yellow to the ACC wire







Rear Fog Light

Have this half done, still have to do the LED in the cluster and wating for my pulse latching relay







Test





INTEC 3rd Brake Light Relocate

Pretty simple and straight forward





Remove rear deck, and grind off plactic welds to remove the factory 3rd brake light, then put on the supplied felt covers






Clean the top inside of the window thoroughly, (if you have some adhesive promoter, you can put in on where the 2 sided tape will attach to the window) Pull out the plastic plug in the roof, line it up and peel off the 2 sided tape and stick. Run your wire down the pass side c pilar and under the rear deck to the 3rd brake light connector.









Done




TRD Aero Stabilizing Trunk Cover


Glad I can read pretty pictures! lol instructions in Japanese!

Not that hard to install, really like how it looks on the car!!








Custom 8 Ball Shift Knob

A tradition that has been done to every manual trans car I have owned

Drill and Tap the ball




Give the shifter a half inch hair cut, and re-cut the threads





Rollin





Front Arm Rest

Got so involved in it that I didn't take any pics



finished pics in next post!!!


Laterz!

[Crashdummy]

Originally Posted by DannyQ86

Nice man! Is that the mustang 3rd brake light you are going to use to replace the oem one?

No, its the INTEC one through FT-86 Speedfactory

[Crashdummy]

Originally Posted by Lonewolf

The black wheels are going to look killer...can't wait

Yes they are

[Packofcrows]

Love it!

[Crashdummy]

Here are the finished pics as she sits right now.

I have a few more things that need to be done, I just dont have the parts yet or the time right now.

Nanako........


















Now to put some miles on her!

[Crashdummy]

Finally had some time to get a few more things done!

Rear Arm Rest
Courtesy light in doors
Custom Ghost Lights in doors
Red Floor Lights


All the stuff laid out




Rear Arm Rest

Pretty simple!

remove seat and unbolt the 2 10mm bolts for the console and pull out the arm rest




The factory glue was not holding so I re-glued it





Installed





Courtesy Lights and Ghost lights


B+ and Ground ran through door boot







Courtesy Lights and Ghost Lights mounted and wired in the door panels







Red LED floor lights for front and rear foot wells


Put a few coats of VHT Nightshades to knock down the brightness








Since there was nowhere to mount them, I made custom brackets for them

Front Drivers

From the Fuse box to the OBDII support bracket





Pass Front

JB Welded this one to the 2 flat spots on the blower assembly





Drivers and Pass Rear

Mounted both to the flap that runs down from the backrest to under the seat, zip ties do the trick. Then ran the wire along with the factory harness.





Finished!

The set up:

Each side is wired to the factory door switch at the BCM and diode isolated

Drivers door opens - Ghost lights, Courtesy light come on there side only, all floor lights on

Passenger door opens - Ghost lights, Courtesy light come on there side only, all floor lights on

Park lights - All Floor lights come on









More things in the works....................soon!


laterz

[fatpwr]

some interesting things you're doing! keep it up!

[1GiantTurtle]

loving your build, i got my rear fog working too [IMG][/IMG]

[Crashdummy]

Originally Posted by 1GiantTurtle

loving your build, i got my rear fog working too [IMG][/IMG]

Your posts were what started me on the road to getting it done. Just havent had the time to finish hooking up the relay board yet, everything else is set to go.

[1GiantTurtle]

where did you get the Courtesy light from?

[ZOMFGAARON]

Originally Posted by 1GiantTurtle

loving your build, i got my rear fog working too [IMG][/IMG]

Interested on how this is done.


Sent from my iPhone using Tapatalk