Official San Antonio , TX Thread!!

[Shneegle]

@Extreme86 and I have been going back and forth with planning a recon run for 8/2/15 (Sunday) we plan to meet in Medina at 9AM on Sunday and hopefully meet with a good amount of the leaders so we can get a game plan going for the big event on 8/8/15.

Anyone is welcome to join us. This is mostly just to make sure that we are set for the real meet. Anyone that can't make it to the Big meet on and want to run with us is welcome.

It would be cool to meet up with some of yall for some grub once I get to the Austin/San Antonio area. If someone wants to plan a small gathering at a restaurant or hidden gem please do for Saturday night.

I posted this in the Austin thread as well.

[fluffy-reindeer-slayer]

Guys i have my enkei rpf1's for sale in the texas thread if anyone is interested.very nice set of wheels.

[Extreme86]

@Shneegle - @MoebiusStrip suggested we have a meet and greet at the Forum in Northeast San Antonio this Saturday evening, 8/1/15, near the Sea Island and Red Robin restaurants around 7PM and I concur. MAP Link. Either one of those restaurants serve up pretty good food. All SATX & Austin area 86's invited to grub out with us and then we'll hang out in the parking lot afterwards. Look for a group of 86s to park next to near those restaurants. If there is limited parking in the immediate restaurant area we might park across the street or just re-group after eating.

Also, we are good to go for a Sunday morning meet-up, 8/2/15, 9AM at the Apple Store in Medina, TX. At about 9:30 or so we'll roll out towards Leakey for a Twisted Sisters recon run. For sure, everyone in the area is invited to join us and for anyone that can't make the big event on 8/8, this would be a great alternative to have some fun!

[MoebiusStrip]

Originally Posted by yaguphire

Cost around 50-65$ for 6x5 sheet

Sent from my Nexus 5 using Tapatalk

Do they apply it for you?

[yaguphire]

Originally Posted by MoebiusStrip

Do they apply it for you?

May need to call the vendor to see if they will do it for you. To my knowledge its a company that sells vinyl and wrap food trucks as a business. wrapping a car is chump change for them i guess compared to wrapping and designing for food trucks.

[Extreme86]

Just a reminder! Shneegle is coming down from the Dallas area this evening as we are gonna do a Twisted Sisters Run, departing from Medina, TX, Sunday, 8/2/15, @ 9AM. Join us if you can!

So, 7 PM this evening, Saturday, 8/1/2015, we are gonna have a Meet-up & Grub out at the Forum when Shneegle gets here. Park near the Red Robin & Sea Island - We'll go where they might be able to accommodate our group with a table.

"LIKE" this post so we have a rough head count and maybe arrange for a table ahead of time.

Thanks!

[MoebiusStrip]

Originally Posted by Extreme86

"LIKE" this post so we have a rough head count and maybe arrange for a table ahead of time.

Thanks!

+1 for me

[AteMyShorts]

Can't make it. Have fun!!

Sent from my HTC One_M8 using Tapatalk

[MoebiusStrip]

Originally Posted by Extreme86

"LIKE" this post so we have a rough head count and maybe arrange for a table ahead of time.

Thanks!

So far me, my husband, a girl from the fb club and her husband are coming for sure. A couple others have said maybe.

[Janunez90]

Looking in SA area for someone that knows how to remove the clutch spring and adjust the clutch pedal.

Ive tried doing it myself and had a hard time, if you could help I would greatly appreciate it and would compensate you for it.

Thanks,

[Mallow]

Hey everyone, it's Kari... I've neglected the forums for a while, but i'm attempting a comeback :P

[Extreme86]

Originally Posted by Janunez90

Looking in SA area for someone that knows how to remove the clutch spring and adjust the clutch pedal.

Ive tried doing it myself and had a hard time, if you could help I would greatly appreciate it and would compensate you for it.

Thanks,

Have you heard about replacing the clutch slave cylinder with an OEM # 30620AA111? Check out this thread: http://www.ft86club.com/forums/showt...ght=30620AA111
$50 OEM part on ebay or $30 something at Autozone.

Originally Posted by Mallow

Hey everyone, it's Kari... I've neglected the forums for a while, but i'm attempting a comeback :P

Nice article you did on the state meet, Kari! Thanks!!

[Extreme86]

@Janunez90 Just did the clutch mod with 3/4" OEM slave cylinder and chase bays clutch line. Ate TYPE 200 brake brake fluid. Pedal feel much improved! Highly recommend over removing the clutch pedal return spring.

[Silentstalker]

Hello,

I am new to the forums and new to san antonio, I am a new owner of a 2015 brz limited