AVO Turbocharger Exhuast Question - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

demariners · 08-10-2015, 11:03 PM

So I am interested in getting the AVO turbocharger kit but I was curious if it will work with my existing setup.

I currently have a Perrin Cold-air intake, Perrin 3" exhaust and Motiv overpipe/front pipe.

I was not sure if the AVO would replace any of these parts or I can reuse these parts?

Furthermore I notice that the AVO comes with a ECUtek tuning map. Can I use this map with no issues with my current mods? Thank you for any assistance.

King Tut · 08-11-2015, 09:38 AM

I believe @Sportsguy83 had to make some modifications to use the Perrin intake with his AVO kit, but the exhaust and over/front pipe should work just fine.

Sportsguy83 · 08-11-2015, 11:43 AM

Perrin CAI will need a custom mount to adapt it's mounting locating and angle in order to work with AVO kit.

The AVO kit provides a basemap. This is meant to take you to your tuner so you can do a proper dyno/street tune. It is a very well tested basemap, going from sea level to high altitudes and has been refined over tenths of thousands of miles, but it is still recommended you get a custom tune for your car mods, environmental conditions, fuel, usage, etc.

demariners · 08-11-2015, 11:55 AM

Makes sense. When you say CAI what is this? Where can I get this?

Will the base map be ok for the time being until I can find someone to tune it? Thanks

demariners · 08-11-2015, 11:56 AM

Sorry I misread the thread. I meant where can I get the mount. Thanks

08-10-2015, 11:03 PM	#1
demariners demariners Join Date: Jan 2015 Drives: 2015 Blue Subaru BRZ Location: Gilbert, AZ Posts: 42 Thanks: 0 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	AVO Turbocharger Exhuast Question So I am interested in getting the AVO turbocharger kit but I was curious if it will work with my existing setup. I currently have a Perrin Cold-air intake, Perrin 3" exhaust and Motiv overpipe/front pipe. I was not sure if the AVO would replace any of these parts or I can reuse these parts? Furthermore I notice that the AVO comes with a ECUtek tuning map. Can I use this map with no issues with my current mods? Thank you for any assistance.

08-11-2015, 09:38 AM	#2
King Tut NASA SpecE30 Racer Join Date: May 2012 Drives: 2006 Honda S2000 Location: Gulf Breeze, FL Posts: 7,279 Thanks: 607 Thanked 5,759 Times in 3,055 Posts Mentioned: 274 Post(s) Tagged: 10 Thread(s)	I believe @Sportsguy83 had to make some modifications to use the Perrin intake with his AVO kit, but the exhaust and over/front pipe should work just fine. __________________ - King Tut Street/Track Car: 2006 Honda S2000 TT3 \|\| Race Car: 1987 BMW 325is SpecE30 \|\| Tow Vehicle: 2014 RAM 1500 EcoDiesel Sold Cars: 2012 BMW M3 \|\| 2013 Subaru BRZ \|\| 2012 Porsche Cayman R \|\| 2009 Chevrolet Z06 \|\| 2009 BMW M3 \|\| 2004 BMW M3 \|\| 2004 Nissan 350Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AVO Turboworld Turbocharger Kit	AVOturboworld	Forced Induction	11	08-06-2015 12:17 AM
Turbocharger in St. Louis	Vinsanity091	Rocky Mountains / Great Plains	0	01-14-2015 12:49 AM
AVO Stage 1 Turbocharger Kit BRZ / FR-S Now Available For Pre-Order!	Boston Motorsports	Forced Induction	82	07-24-2013 12:42 AM
Electric Turbocharger	Shankenstein	Forced Induction	91	06-24-2013 03:47 PM

08-11-2015, 11:55 AM	#4
demariners demariners Join Date: Jan 2015 Drives: 2015 Blue Subaru BRZ Location: Gilbert, AZ Posts: 42 Thanks: 0 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Makes sense. When you say CAI what is this? Where can I get this? Will the base map be ok for the time being until I can find someone to tune it? Thanks

08-11-2015, 11:56 AM	#5
demariners demariners Join Date: Jan 2015 Drives: 2015 Blue Subaru BRZ Location: Gilbert, AZ Posts: 42 Thanks: 0 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Sorry I misread the thread. I meant where can I get the mount. Thanks

User Name		Remember Me?
Password