What would you guys recommend for an aggressive and sharp exhaust, but not annoyingly - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

iStanley · 07-16-2015, 01:50 PM

Not too costly would also be a plus! Thanks

tinma · 07-16-2015, 01:54 PM

Corsa is a great exhaust. Its not on the loud side, but it has a great tone. Its a little bit on the pricey side but you also pay for quality.

Many other great exhausts like Q300 or Perrin 2.5 (3.0 if planning on going turbo)

iStanley · 07-16-2015, 02:00 PM

Quote:

Originally Posted by tinma

Corsa is a great exhaust. Its not on the loud side, but it has a great tone. Its a little bit on the pricey side but you also pay for quality.

Many other great exhausts like Q300 or Perrin 2.5 (3.0 if planning on going turbo)

I don't know much of the technical side of cars but what if I don't plan on going turbo any time soon but till get 3.0 instead of 2.5?

Bergen23 · 07-16-2015, 02:05 PM

Get the TF-Works exhaust. 500 for unmuffled or 595 for the muffled version. I have the unmuffled version and it's fantastic.

iStanley · 07-16-2015, 02:08 PM

Quote:

Originally Posted by Bergen23

Get the TF-Works exhaust. 500 for unmuffled or 595 for the muffled version. I have the unmuffled version and it's fantastic.

Is there a video of it with just the exhaust alone? I've heard some with headers and other things and it sounds amazing. Exactly what I was looking for.

Bergen23 · 07-16-2015, 02:11 PM

Quote:

Originally Posted by iStanley

Is there a video of it with just the exhaust alone? I've heard some with headers and other things and it sounds amazing. Exactly what I was looking for.

There's a couple videos of it in the TF-Works exhaust thread on here. Race version and sports version. One of the race videos is with a test pipe and the exhaust, the other video is just the exhaust, and mine in that thread is with headers and the exhaust. The sports version in that thread is just the exhaust as well.

Providing you're ok with a single exit exhaust, it could easily fit the bill

DAEMANO · 07-16-2015, 02:12 PM

Both catbacks low-cost, great findsabout $560 ea.

Single Exit - Tanabe Concept G Medallion - Lightweight, quieter (at 93db), great looking. Get an @ft86speedfactory exhaust hole cover for the un-used side.

http://www.ft86speedfactory.com/tana...haust-966.html

Dual Exit - MXP Comp RS - Got that bass. Sounds & looks incredible installed on the car. No drone.

http://www.fteightysix.com/performan.../#.Vafzw7UiHB5

NLS8520 · 07-17-2015, 11:59 AM

Quote:

Originally Posted by tinma

Corsa is a great exhaust. Its not on the loud side, but it has a great tone. Its a little bit on the pricey side but you also pay for quality.

Many other great exhausts like Q300 or Perrin 2.5 (3.0 if planning on going turbo)

I agree with you on the Corsa. It is just a bit too heavy however. I just can not get over the idea of adding weight while paying hundred's of dollars, even though its just a few pounds it feels wrong somehow, otherwise I agree I would be all over the Corsa.

shifter907 · 07-17-2015, 12:19 PM

Quote:

Originally Posted by DAEMANO

Both catbacks low-cost, great findsabout $560 ea.

Single Exit - Tanabe Concept G Medallion - Lightweight, quieter (at 93db), great looking. Get an @ft86speedfactory exhaust hole cover for the un-used side.

http://www.ft86speedfactory.com/tana...haust-966.html

Dual Exit - MXP Comp RS - Got that bass. Sounds & looks incredible installed on the car. No drone.

http://www.fteightysix.com/performan.../#.Vafzw7UiHB5

I've been going back and forth deciding between the Tanabe and Invidia N1, but haven't heard anything about the MXP before. I'm thinking now that it could be a good third option

cdq85 · 07-17-2015, 01:51 PM

my advice would be to stay away from n1 unless you are done modding the exhaust after the catback. I've heard it's nice just alone but I can tell you first hand that it is realllllllllly loud paired up with headers. sounds great but loud.

AppleSauce · 07-21-2015, 08:46 AM

Quote:

Originally Posted by iStanley

I don't know much of the technical side of cars but what if I don't plan on going turbo any time soon but till get 3.0 instead of 2.5?

i went with perrin 3.0 catback and nameless 2.5 overdownfrontpipe combo and its fine. wouldnt go 3.0 all the way back unless u do forced induction though.

Starkiller · 08-02-2015, 04:24 PM

This is mine on the dyno.
[ame="https://www.youtube.com/watch?v=A306zUVPiBg"]FR-S Dyno - YouTube[/ame]

ort895 · 08-02-2015, 04:37 PM

Just posted some videos of my new DC Sports exhaust on youtube check it out, i started a thread in the exhuast section and put all the videos there. Sounds real crisp but not too loud. Paired with some headers i may be in heaven.
PM me with any questions.

weederr33 · 08-02-2015, 05:02 PM

Do something original. We all have a Q300, Perrin, Nameless, or N1. Get something out of the ordinary. Like Milltek, MXP, or Injen!

07-16-2015, 01:50 PM	#1
iStanley They call me Stan Join Date: Mar 2014 Drives: Firestorm FR-S Location: Boiling Springs, SC Posts: 201 Thanks: 47 Thanked 96 Times in 61 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	What would you guys recommend for an aggressive and sharp exhaust, but not annoyingly Not too costly would also be a plus! Thanks

08-02-2015, 04:37 PM	#13
ort895 Senior Member Join Date: Aug 2014 Drives: 2013 BRZ Location: North Carolina Posts: 695 Thanks: 195 Thanked 139 Times in 113 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Just posted some videos of my new DC Sports exhaust on youtube check it out, i started a thread in the exhuast section and put all the videos there. Sounds real crisp but not too loud. Paired with some headers i may be in heaven. PM me with any questions. __________________ Yeah its an auto, deal with it. Last edited by ort895; 08-02-2015 at 05:07 PM.

08-02-2015, 05:02 PM	#14
weederr33 Airborne at your service Join Date: Sep 2014 Drives: '17 BRZ Series.Yellow Location: El Paso, Texas Posts: 6,339 Thanks: 4,538 Thanked 5,603 Times in 2,938 Posts Mentioned: 33 Post(s) Tagged: 2 Thread(s)	Do something original. We all have a Q300, Perrin, Nameless, or N1. Get something out of the ordinary. Like Milltek, MXP, or Injen! __________________ Series.Yellowbird - http://www.ft86club.com/forums/showthread.php?t=122135 MS, CSCS, TSAC-F, CPT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clicking with Sharp Turns	carma143	BRZ First-Gen (2012+) -- General Topics	7	12-09-2014 12:43 AM
Local shop gave me an estimate of a more aggressive exhaust. Good deal?	Mason12947	Engine, Exhaust, Transmission	37	04-08-2014 10:49 PM
Most annoyingly over-asked questions on FT86 forums	mit_peid	Off-Topic Lounge [WARNING: NO POLITICS]	36	01-16-2014 02:48 PM
Sharp grease lines	Tiremonkey0824	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	10	09-24-2012 01:29 PM

07-16-2015, 01:54 PM	#2
tinma Senior Member Join Date: Jun 2013 Drives: '13 BRZ Location: Canada Posts: 495 Thanks: 479 Thanked 172 Times in 117 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	Corsa is a great exhaust. Its not on the loud side, but it has a great tone. Its a little bit on the pricey side but you also pay for quality. Many other great exhausts like Q300 or Perrin 2.5 (3.0 if planning on going turbo)

07-16-2015, 02:05 PM	#4
Bergen23 Banned Join Date: Dec 2014 Drives: '15 Halo FR-S Location: Ontario, Canada Posts: 1,317 Thanks: 922 Thanked 950 Times in 492 Posts Mentioned: 22 Post(s) Tagged: 0 Thread(s)	Get the TF-Works exhaust. 500 for unmuffled or 595 for the muffled version. I have the unmuffled version and it's fantastic.

07-17-2015, 01:51 PM	#10
cdq85 Senior Member Join Date: Dec 2014 Drives: 2013 Raven FR-S Location: Greensburg, PA Posts: 249 Thanks: 107 Thanked 285 Times in 113 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	my advice would be to stay away from n1 unless you are done modding the exhaust after the catback. I've heard it's nice just alone but I can tell you first hand that it is realllllllllly loud paired up with headers. sounds great but loud.

08-02-2015, 04:24 PM	#12
Starkiller Senior Member Join Date: Aug 2013 Drives: 2013 Scion FR-S 10 series Location: Tampa, FL Posts: 139 Thanks: 87 Thanked 63 Times in 37 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	This is mine on the dyno. [ame="https://www.youtube.com/watch?v=A306zUVPiBg"]FR-S Dyno - YouTube[/ame]

User Name		Remember Me?
Password