Invidia Catless and Catted Front Pipe - ** FT-86 SpeedFactory ** - Page 7 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FR-S Matt · 01-30-2014, 04:46 PM

Quote:

Originally Posted by ProjectD

I thought the Catless (non res) version was the cheapest? are we looking at the same Nvidia resonated/ catless pipes here?

It is, but you're losing a resonator/cat... Noise will be crazy loud on an aftermarket header. It's fine with the stock header.

ProjectD · 01-30-2014, 04:58 PM

Yea that part I knew. I do plan on UEL header (Rev works/ JDL) so I'm still debating how i will set everything up.

Quote:

Originally Posted by FR-S Matt

It is, but you're losing a resonator/cat... Noise will be crazy loud on an aftermarket header. It's fine with the stock header.

FR-S Matt · 01-30-2014, 05:08 PM

Quote:

Originally Posted by ProjectD

Yea that part I knew. I do plan on UEL header (Rev works/ JDL) so I'm still debating how i will set everything up.

You could pull off a catless front pipe with a catless header but you need a heavily muffled catback like the Perrin resonated or Q300. Otherwise, you're going to get some rasp most likely. This is where it gets tricky. If you go light in one place of the exhaust, you have to muffle another section unless you just wanting it sounding like crap.

AllStar0419 · 01-30-2014, 08:01 PM

Quote:

Originally Posted by ProjectD

I thought the Catless (non res) version was the cheapest? are we looking at the same Nvidia resonated/ catless pipes here?

invidia makes 3 front pipes. catless non resonated is the cheapest but that will be way too loud with any aftermarket header(for me at least). catless resonated is about 80 dollars more and catted is about 200 more than that. since the catless resonated has about the same performance gains(if not better) than the catted and ill have a cat in my headers ill save the 200 and use it for a front pipe.

FR-S Matt · 01-30-2014, 09:16 PM

I went with the catted front pipe in case they ever bring the sniffer to my area. Had to have one cat somewhere and I chose the front pipe instead of the header.

ProjectD · 01-30-2014, 09:31 PM

Well see this is what i was thinking too....along with maybe a resonated mid-pipe.....or.....catless Header and FP with Resonated CBE. Not sure which would produce a "good sound/ tone."

Quote:

Originally Posted by FR-S Matt

I went with the catted front pipe in case they ever bring the sniffer to my area. Had to have one cat somewhere and I chose the front pipe instead of the header.

FR-S Matt · 01-30-2014, 09:36 PM

Quote:

Originally Posted by ProjectD

Well see this is what i was thinking too....along with maybe a resonated mid-pipe.....or.....catless Header and FP with Resonated CBE. Not sure which would produce a "good sound/ tone."

Yeah, welcome to the world of hard decisions with exhaust, lol.

Knickstape · 02-11-2014, 03:56 PM

Does anybody know who else makes a catted AND resonated front pipe besides nameless? I really like there product but the price is high, and I don't think invidia does both

FR-S Matt · 02-11-2014, 04:41 PM

Quote:

Originally Posted by Knickstape

Does anybody know who else makes a catted AND resonated front pipe besides nameless? I really like there product but the price is high, and I don't think invidia does both

The price is high because it includes the overpipe section too. When it comes down to pricing out an overpipe and front pipe together, it's not that expensive. Invidia does a regular resonator, not a Helmholtz. There's a big difference in those two. Nameless only does a resonated 3" downpipe that's catted. The 2.5" only has the Helmholtz option.

86T · 01-12-2015, 05:21 PM

I just purchased one from your guys yesterday. Always had great experience with you guys!

ItzYaBoyBugZ · 05-15-2015, 10:37 AM

i have n1 exhuast, catted invidia front pipe and invidia over pipe on tomei headers with injen intake and sounds good / sexy IMO here is vid link

[ame="https://www.youtube.com/watch?v=LQFiJ5rYO6s"]200WHP 15 FRS Auto - YouTube[/ame]

tinma · 06-09-2015, 02:08 PM

invidia catless frontpipe still on backorder?

FT-86 SpeedFactory · 07-13-2015, 05:12 PM

Getting ready for Ultimate Track Car challenge at VIR later this week!

Necric · 07-14-2015, 10:32 AM

I got the catless resonated pipe, however I'm getting an exhaust leak between front and mid pipe. Do they make a gasket I can order for this?

02-11-2014, 03:56 PM	#92
Knickstape Senior Member Join Date: Apr 2013 Drives: '13 FR-S (Asphalt) Location: Tacoma, WA Posts: 127 Thanks: 179 Thanked 28 Times in 18 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Does anybody know who else makes a catted AND resonated front pipe besides nameless? I really like there product but the price is high, and I don't think invidia does both __________________ Opti-Guard, 35% Tint, Perrin 2" Antenna, Helix Side Markers, Valenti Tails, Carsmo Armrest, LED DRL Strip // UniChip, Perrin CAI & Inlet Tube, Perrin Cat-Back Exhaust, Grimmspeed Super-Loop Header.

07-14-2015, 10:32 AM	#98
Necric Member Join Date: Jul 2013 Drives: 2013 FR-S Location: South Carolina Posts: 38 Thanks: 2 Thanked 2 Times in 2 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	I got the catless resonated pipe, however I'm getting an exhaust leak between front and mid pipe. Do they make a gasket I can order for this? __________________ 2013 6MT Firestom FR-S. invidia Q300, OpenFlash Tablet and Header, Eibach Sportline Springs, SPC LCA, Shift springs and bushings. Dashlinq4 Radio.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Invidia N1 - VIDEOS and Installed Photos FT-86 SpeedFactory	FT-86 SpeedFactory	Engine, Exhaust, Transmission	200	05-16-2017 07:07 AM
*Invidia N1 FRS / BRZ SALE* Videos and Photos - FT-86 SpeedFactory does it again!	FT-86 SpeedFactory	Engine, Exhaust, Bolt-Ons	33	10-24-2012 11:11 PM
Invidia N1 - Group Buy FT-86 SpeedFactory	FT-86 SpeedFactory	Groupbuys	65	10-23-2012 01:25 PM
Track pipe + catless front pipe	diss7	Engine, Exhaust, Transmission	21	10-09-2012 02:10 AM
Invidia N1 - Sneak Peak FT-86 SpeedFactory	FT-86 SpeedFactory	Engine, Exhaust, Transmission	54	10-02-2012 11:48 PM

01-12-2015, 05:21 PM	#94
86T Member Join Date: Jan 2015 Drives: 2013 FRS Location: Los Angeles Posts: 16 Thanks: 1 Thanked 9 Times in 6 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I just purchased one from your guys yesterday. Always had great experience with you guys!

05-15-2015, 10:37 AM	#95
ItzYaBoyBugZ Member Join Date: Apr 2015 Drives: 15 FRS Location: Tampa FL Posts: 44 Thanks: 0 Thanked 13 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	i have n1 exhuast, catted invidia front pipe and invidia over pipe on tomei headers with injen intake and sounds good / sexy IMO here is vid link [ame="https://www.youtube.com/watch?v=LQFiJ5rYO6s"]200WHP 15 FRS Auto - YouTube[/ame]

06-09-2015, 02:08 PM	#96
tinma Senior Member Join Date: Jun 2013 Drives: '13 BRZ Location: Canada Posts: 495 Thanks: 479 Thanked 172 Times in 117 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	invidia catless frontpipe still on backorder?

07-13-2015, 05:12 PM	#97
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,579 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	Getting ready for Ultimate Track Car challenge at VIR later this week!

User Name		Remember Me?
Password