Trans insert and block whine reduction

[Jake_86]

Originally Posted by endless_pain

My apologies, misinterpreted when read the "AND/OR". I thought you meant this:
http://www.forcedfabllc.com/ForcedFa...S-_p_6927.html
Which works with the bushing. So you have both for a stiffer trans mount.

To answer you question, I have the whiteline trans insert with the trd short shifter and was using until very recently the energy suspension shifter bushing. Zero whine.
Then I replaced the energy suspension piece for the one that came with the short shifter, still zero whine.
Sorry for the confusion.

So was that link the T block you had on that was causing the whine? And it went away (pretty much) after putting the stock t block back on?

[P@ul]

Originally Posted by Jake_86

How loud is your whine with just insert? Because I could tolerate a lower decibel

It's a high pitched noise you can hear at low speeds. It gets covered up at highway speeds by the wind and road noise.

[endless_pain]

Originally Posted by Jake_86

So was that link the T block you had on that was causing the whine? And it went away (pretty much) after putting the stock t block back on?

Yes, but my thought is that the whine was even higher because I had both. Between the T and the insert I would go with the insert, no whine.

[Jake_86]

Originally Posted by endless_pain

Yes, but my thought is that the whine was even higher because I had both. Between the T and the insert I would go with the insert, no whine.

perfect. thats what i was thinking as well

Thanks everyone!!!!!

[Darknd666]

Is the whine a bad thing for the transmission? I have just the insert installed from whiteline and i am experiencing the whine you speak of.