Ottawa FR-S - Page 639 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Slick · 06-22-2015, 01:44 PM

Some of you may have seen it on Facebook, but I put some graphics on the car, because Rice!

I'll be easier to spot now...

Ft86Chris · 06-22-2015, 10:46 PM

Just letting you guys know, short notice, but a couple driving friends and I are going for a spin Through the 509 on Sunday,

We meet at Tanger outlets near the CTC center around 10, and leave for 1030,
Not limited to 86s, just thought id extend the invite.

FRS_Ken · 06-23-2015, 07:26 AM

Quote:

Originally Posted by Slick

Some of you may have seen it on Facebook, but I put some graphics on the car, because Rice!

You just added at least 50hp adding that many stickers!!!!
Lol
Looks really good to me and is great a combo of racecar looks and cheap advertising for your business.

Slick · 06-23-2015, 08:26 AM

Quote:

Originally Posted by FRS_Ken

You just added at least 50hp adding that many stickers!!!!
Lol
Looks really good to me and is great a combo of racecar looks and cheap advertising for your business.

Thanks, it sure is noticeable now, gotta stay off the popo's radar.

We're working on some other graphics in addition to these that should really flow with the lines of the FT86.

Now I gotta work on more track upgrades again, new personal best set at Bogie but still off my target for this year.

UMB FR-S · 06-23-2015, 08:31 AM

Quote:

Originally Posted by Slick

Thanks, it sure it noticeable now, gotta stay off the popo's radar.

We're working on some other graphics in addition to these that should really flow with the lines of the FT86.

Now I gotta work on more track upgrades again, new personal best set at Bogie but still off my target for this year.

There will be no more improving for you this year you are currently fast enough

The_Understated · 06-23-2015, 09:51 AM

^ Lmao @UMB FR-S. Congrats btw @Slick! Never thought the twins could destroy a track like your setup does right now when we went out Friday... O.o

On a side note, figured I'd share this little spreadsheet I've put together for my eventual final build (If I make it there haha). Feel free to use it for your own if you'd like. Little more applicable to us Canadians since I included calculations to convert CAD to US depending on where you input numbers (and I left plenty of notes

).
Let me know what you think!

Pbrown · 06-23-2015, 10:16 AM

Quote:

Originally Posted by The_Understated

^ Lmao @UMB FR-S. Congrats btw @Slick! Never thought the twins could destroy a track like your setup does right now when we went out Friday... O.o

On a side note, figured I'd share this little spreadsheet I've put together for my eventual final build (If I make it there haha). Feel free to use it for your own if you'd like. Little more applicable to us Canadians since I included calculations to convert CAD to US depending on where you input numbers (and I left plenty of notes

).
Let me know what you think!

Nice. The only thing potentially missing is injectors if you go E85. Nice job. and that will be some car if you can do it.

The_Understated · 06-23-2015, 10:39 AM

Quote:

Originally Posted by Pbrown

Nice. The only thing potentially missing is injectors if you go E85. Nice job. and that will be some car if you can do it.

Damn I knew I was forgetting a few more things in the engine.

And thanks, kinda makes me cry how much will go into it, but I'd love to see what it turns into over the next several years.

AznKirby · 06-23-2015, 10:41 AM

Quote:

Originally Posted by The_Understated

^ Lmao @UMB FR-S. Congrats btw @Slick! Never thought the twins could destroy a track like your setup does right now when we went out Friday... O.o

On a side note, figured I'd share this little spreadsheet I've put together for my eventual final build (If I make it there haha). Feel free to use it for your own if you'd like. Little more applicable to us Canadians since I included calculations to convert CAD to US depending on where you input numbers (and I left plenty of notes

).
Let me know what you think!

Glad to know I'm not the only one using an Excel sheet to document my mods!
Although sometimes I wish I wouldn't keep track of how much I've spent..

FRSCanuck · 06-23-2015, 10:49 AM

Quote:

Originally Posted by The_Understated

^ Lmao @UMB FR-S. Congrats btw @Slick! Never thought the twins could destroy a track like your setup does right now when we went out Friday... O.o

On a side note, figured I'd share this little spreadsheet I've put together for my eventual final build (If I make it there haha). Feel free to use it for your own if you'd like. Little more applicable to us Canadians since I included calculations to convert CAD to US depending on where you input numbers (and I left plenty of notes

).
Let me know what you think!

impressive spreadsheet!

The_Understated · 06-23-2015, 10:54 AM

Quote:

Originally Posted by AznKirby

Glad to know I'm not the only one using an Excel sheet to document my mods!
Although sometimes I wish I wouldn't keep track of how much I've spent..

Haha, I started it after I lost track of how many KMs were on parts that I tried selling from the Si. Figured I'd do things right this time.

Quote:

Originally Posted by FRSCanuck

impressive spreadsheet!

Thanks! If I can find a way to program excel to lookup current exchange rate from the Bank of Canada's website this would be even more useful, wouldn't need to show anything in USD.

FRS_Ken · 06-23-2015, 11:02 AM

Quote:

Originally Posted by The_Understated

^ Lmao @UMB FR-S. Congrats btw @Slick! Never thought the twins could destroy a track like your setup does right now when we went out Friday... O.o

On a side note, figured I'd share this little spreadsheet I've put together for my eventual final build (If I make it there haha). Feel free to use it for your own if you'd like. Little more applicable to us Canadians since I included calculations to convert CAD to US depending on where you input numbers (and I left plenty of notes

).
Let me know what you think!

Nice spreadsheet.
My spreadsheet is more basic, but just as depressing regarding the total

I might update a copy of yours with my "data".
thanks for sharing

NepeanFR-S · 06-23-2015, 04:14 PM

Quote:

Originally Posted by Slick

Some of you may have seen it on Facebook, but I put some graphics on the car, because Rice!

I'll be easier to spot now...

Looks totally awesome. Bet Starsky and Hutch would give it thumbs too

jvincent · 06-23-2015, 04:19 PM

Quote:

Originally Posted by The_Understated

^ Lmao @UMB FR-S. Congrats btw @Slick! Never thought the twins could destroy a track like your setup does right now when we went out Friday... O.o

On a side note, figured I'd share this little spreadsheet I've put together for my eventual final build (If I make it there haha). Feel free to use it for your own if you'd like. Little more applicable to us Canadians since I included calculations to convert CAD to US depending on where you input numbers (and I left plenty of notes

).
Let me know what you think!

Dude, with all the stuff on that list and your aren't going to upgrade your wheels?

Sent from my LG-D852 using Tapatalk

06-22-2015, 01:44 PM	#8933
Slick Senior Member Join Date: Jul 2011 Drives: FR-S Firestorm 6MT Location: Ottawa, Ontario, Canada Posts: 1,881 Thanks: 345 Thanked 1,389 Times in 628 Posts Mentioned: 137 Post(s) Tagged: 2 Thread(s)	New graphics Some of you may have seen it on Facebook, but I put some graphics on the car, because Rice! I'll be easier to spot now...

06-22-2015, 10:46 PM	#8934
Ft86Chris Winter ***e engaged Join Date: Sep 2014 Drives: Ashpalt 2014 Frs Manual Location: Ottawa, Ontario Posts: 335 Thanks: 351 Thanked 104 Times in 66 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Just letting you guys know, short notice, but a couple driving friends and I are going for a spin Through the 509 on Sunday, We meet at Tanger outlets near the CTC center around 10, and leave for 1030, Not limited to 86s, just thought id extend the invite. __________________ 2014 Asphalt MT FR-S Ecutek custom tune, Bolton's and Sticky tires.

User Name		Remember Me?
Password