ZG Flares..?

[SmsAlSuwaidi]

Originally Posted by Yamajee

Bolted, they never come molded. That would be fiberglass fenders.

yeah, imagine them breaking off while bolted. So its going to be 10 times worst if molded.

[whathedunk]

although it would look better if it was molded, I would still go with bolting them on with nutserts or something. The flares are cheaper to replace than having to replace the whole fender and repaint should a wheel come in contact with the flare.

[Yamajee]

Originally Posted by SmsAlSuwaidi

yeah, imagine them breaking off while bolted. So its going to be 10 times worst if molded.

Originally Posted by whathedunk

although it would look better if it was molded, I would still go with bolting them on with nutserts or something. The flares are cheaper to replace than having to replace the whole fender and repaint should a wheel come in contact with the flare.

Agreed

[Stayfrshh]

Originally Posted by whathedunk

yes, i was going to go this route and tested multiple flares for fitment. I found the wide ZG flares fit the car best without twisting or pulling the actual flares. I decided against it because you will still need to cut about 3-4 inches off the fender and quarter panel and then box it up.

Where did you get your ZG flares from?

[whathedunk]

Originally Posted by Stayfrshh

Where did you get your ZG flares from?

I bought mine from another source before back when I had my Z but looks like you can get them from http://www.jpngarage.com/Fender-Flares_c13.htm

[continuecrushing]

any updates on this? fitment etc...

[DavidBob]

Originally Posted by whathedunk

I bought mine from another source before back when I had my Z but looks like you can get them from http://www.jpngarage.com/Fender-Flares_c13.htm

Wow awesome, do you know which ones fit the 86 like the picture above?
-Dave

[8R6]

tacky

[whathedunk]

Originally Posted by DavidBob

Wow awesome, do you know which ones fit the 86 like the picture above?
-Dave

which picture are you referring to?

[DavidBob]

sorry I should have been a little more specific, I was talking about post #2

[whathedunk]

Originally Posted by DavidBob

sorry I should have been a little more specific, I was talking about post #2

Ah ok, those specific flares in the picture were bought from a source that I don't believe are in production anymore. The closest match would probably be these http://www.jpngarage.com/Wide-Fiberg...erglass-zg.htm.

[DavidBob]

Originally Posted by whathedunk

Ah ok, those specific flares in the picture were bought from a source that I don't believe are in production anymore. The closest match would probably be these http://www.jpngarage.com/Wide-Fiberg...erglass-zg.htm.

Ohhhhh alright thanks!