OEM illuminated trunk release button - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Chaetagnath · 04-25-2015, 11:22 PM

Quote:

Originally Posted by mikeTee

@Guillaume, will the trunk button LED dim with the dimmer wheel?

As long as the illumination is tapped into the purple wire of the dimmer switch.

edit: Also, you must tap the black and white wire right next to the purple for your ground point. It technically controls the dimming.

ZOMFGAARON · 04-26-2015, 12:20 AM

Quote:

Originally Posted by Chad86

@ZOMFGAARON!

After purchasing through www.amayama.com I can say, from experience, this is definitely the best site to purchase OEM parts.
Good prices, international shipping and the parts arrived in less than a week with zero customs charges.

I highly recommend to anyone looking for OEM parts.

Glad to hear it post up pictures once you finish up the install!!!

Sent from my iPhone using Tapatalk

jazztennor · 04-27-2015, 10:33 PM

where can i buy the wires here in the us???

jazztennor · 04-28-2015, 10:45 PM

anyone??????

mikeTee · 04-28-2015, 11:26 PM

Quote:

Originally Posted by jazztennor

anyone??????

http://toyotaparts.bochtoyotasouth.c...ota/8299812750

Chaetagnath · 05-03-2015, 02:05 AM

Quote:

Originally Posted by mikeTee

@Guillaume, will the trunk button LED dim with the dimmer wheel?

Actually I think I was wrong. It's technically controlled through the ground wire, not the 12V+. So, you have to make sure you tap the black and white wire (pin 3) right next to the purple wire (pin 2) coming from the dimmer as your ground (as opposed to just grounding it on a bolt somewhere). The purple wire makes a convenient + wire to tap though since it's right there.

Guillaume · 05-03-2015, 03:56 AM

Quote:

Originally Posted by Chaetagnath

Actually I think I was wrong. It's technically controlled through the ground wire, not the 12V+. So, you have to make sure you tap the black and white wire (pin 3) right next to the purple wire (pin 2) coming from the dimmer as your ground (as opposed to just grounding it on a bolt somewhere). The purple wire makes a convenient + wire to tap though since it's right there.

Nope. It does dim.

Chaetagnath · 05-03-2015, 12:13 PM

Quote:

Originally Posted by Guillaume

Nope. It does dim.

What did you use as the ground?

Guillaume · 05-03-2015, 12:30 PM

Quote:

Originally Posted by Chaetagnath

What did you use as the ground?

The black and white wire.

Trap63 · 05-18-2015, 05:52 PM

In Europe we have on GT86 this part no. SU00305478 from late 2014 (illuminated).

Guillaume · 05-19-2015, 01:35 AM

Quote:

Originally Posted by Trap63

In Europe we have on GT86 this part no. SU00305478 from late 2014 (illuminated).

It is the same part number I give in the original post. It is not plug and play with pre-2015 cars, as explained.

banane63 · 05-24-2015, 05:56 AM

Merci Guillaume ! T'as plus qu'à le mettre sur le site français !

Just a thing : if you remove the copper part, the moving part of the knob can be removed and then it is easier to remove the transparent top part from it.

Guillaume · 05-24-2015, 06:25 AM

Quote:

Originally Posted by banane63

Merci Guillaume ! T'as plus qu'à le mettre sur le site français !

Just a thing : if you remove the copper part, the moving part of the knob can be removed and then it is easier to remove the transparent top part from it.

Déjà fait

And thanks for the tip!

mister.bond · 10-14-2015, 03:52 PM

i was so sad about the situation that the Switch is not lighted !
i always had trouble to find it !
have done the Lighted Switch to my BRZ today,
Big Thanks from Germany for the Wonderful DIY !!!!!!

04-27-2015, 10:33 PM	#31
jazztennor Senior Member Join Date: Aug 2012 Drives: Scion FR-s Location: Concord NC Posts: 422 Thanks: 41 Thanked 109 Times in 70 Posts Mentioned: 29 Post(s) Tagged: 2 Thread(s)	where can i buy the wires here in the us??? __________________ Upgrades EVO 3 Exhaust,Emblem swap,Full Carbon Interior,Greddy intake

04-28-2015, 10:45 PM	#32
jazztennor Senior Member Join Date: Aug 2012 Drives: Scion FR-s Location: Concord NC Posts: 422 Thanks: 41 Thanked 109 Times in 70 Posts Mentioned: 29 Post(s) Tagged: 2 Thread(s)	anyone?????? __________________ Upgrades EVO 3 Exhaust,Emblem swap,Full Carbon Interior,Greddy intake

05-18-2015, 05:52 PM	#38
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 922 Thanks: 1,176 Thanked 839 Times in 289 Posts Mentioned: 40 Post(s) Tagged: 1 Thread(s)	In Europe we have on GT86 this part no. SU00305478 from late 2014 (illuminated). __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trunk opener button	fitcious	Scion FR-S / Toyota 86 GT86 General Forum	13	05-13-2014 02:24 AM
Trunk remote or button won't pop open?	914_WHITE_FRS	Issues \| Warranty \| Recalls / TSB	6	07-05-2013 11:08 AM
Trunk button not working	Jahdai42	Issues \| Warranty \| Recalls / TSB	4	02-19-2013 09:03 AM
Trim removal - boot release button panel	StuAU	Cosmetic Modification (Interior/Exterior/Lighting)	2	02-04-2013 01:48 AM
Question for owners - Boot release button	proficience	AUSTRALIA	7	07-27-2012 12:12 PM

10-14-2015, 03:52 PM	#42
mister.bond Senior Member Join Date: Feb 2014 Drives: BRZ Subaru Location: Germany Posts: 171 Thanks: 45 Thanked 94 Times in 46 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	i was so sad about the situation that the Switch is not lighted ! i always had trouble to find it ! have done the Lighted Switch to my BRZ today, Big Thanks from Germany for the Wonderful DIY !!!!!!

User Name		Remember Me?
Password