Show off your interior!

[Holyshiba]

Originally Posted by nevin86

Also just did the side vents and door handles in black, don't have any pics of those.

I'm digging the Orange. What did you use? 3m wrap?

[nevin86]

Originally Posted by Holyshiba

I'm digging the Orange. What did you use? 3m wrap?

Thanks, No, I used Plasti Dip. White base coats and then Blaze Orange.

[ck-GT86]

Here's my Krylon blacked-out interior with new steering wheel

Sabelt 633 with a Works Bell 540 Hub





.ck

[Drakiv]

Originally Posted by Jake_86

I know a lot of people may think it's too much but I love gold haha. Got rid of all silver trim and replaced with carbon fiber or gold. Had custom gold 86 decals made. Vent still opens but has a slick 86 when closed.

I really like the 86 decals on your a/c vents. Very nice.

[Zen86]

Here's mine. Yep, it's another black and red two tone :p

[Jake_86]

You could remove the top center vent trim and paint that red as well

[Zen86]

Yea but it wouldn't look right to me. A red ring just floating in the middle of the dash. I also had the shifter bezel red but it offset the black middle console and tc buttons too much. Painted it black and it just flows better.

[uEih]

Those of you who used vinyl, how did you wrap it so well? I wrapped mine but corners are giving me issues. I heat it up a lot but the issues I face are waves in the lines because it was heated and not stretched (Brushed Aluminum vinyl) and the inner corners around the head unit trim, it lifts and I can't keep it down.

[Jake_86]

Originally Posted by uEih

Those of you who used vinyl, how did you wrap it so well? I wrapped mine but corners are giving me issues. I heat it up a lot but the issues I face are waves in the lines because it was heated and not stretched (Brushed Aluminum vinyl) and the inner corners around the head unit trim, it lifts and I can't keep it down.

I didn't even use heat on mine (the gold). Just sorta stretched it and smoothed it. The key is you MUST wipe it clean before applying vinyl

[vividracing]

Originally Posted by Zen86

Here's mine. Yep, it's another black and red two tone :p

Tell me how you got the A/C controls off, is it easy to do? Where'd you get the dials? Those aren't OEM. I want to paint all my buttons and knobs Galaxy Blue like I did the trim (shown a few posts above).

-RyanG

[Jake_86]

Originally Posted by vividracing

Tell me how you got the A/C controls off, is it easy to do? Where'd you get the dials? Those aren't OEM. I want to paint all my buttons and knobs Galaxy Blue like I did the trim (shown a few posts above).

-RyanG

There's after market ac control covers on ftspeedfactory but you would have to paint them, yes

[Zen86]

Originally Posted by vividracing

Tell me how you got the A/C controls off, is it easy to do? Where'd you get the dials? Those aren't OEM. I want to paint all my buttons and knobs Galaxy Blue like I did the trim (shown a few posts above).

-RyanG

Originally Posted by Jake_86

There's after market ac control covers on ftspeedfactory but you would have to paint them, yes

I got mine off eBay. But yea they only carry red black and silver dials. For the push controls I just vinyl wrapped without taking it off the car. It's pretty easy, use an excto knife.

[JDsThatGuy]

Originally Posted by Zen86

Here's mine. Yep, it's another black and red two tone :p

Where did you get the climate control dials and red buttons below them?

[Zen86]

See above. EBay for the circle controls and vinyl wrap for the buttons below them