Philippines

[dhoeze]

Hahaha..ikaw pa..basta kakampi tayo approved!!!

[Martinnangel]

Hello, everyone!

Been a while since I last logged in here.

Anyway, I recently encountered a common problem I've seen in other threads - Idle speed fluctuation.

Even with the AC on/off, it starts from 750-800 then drops to 400-450 then foes up to 1000 and back to 750. I read that some owners had their cars stall on them, thank fully I havent encountered that yet. So I was hoping to ge some Advise from you.

By the way, I recently had a new intake installed from TB to Filter (HKS) and A full exhaust. Now, it might be the intake (vacuum leak) but im checking that tomorrow. although from other threads I've deduced, actually more of guess work haha, that it might be:

1.a vacuum leak from the air intake
2. a loose unclamped hose care of http://www.ft86club.com/forums/showt...light=vac+leak
3. the position of the air filter, air might be too hot coming in (haven't checked Intake air temp yet though)
4. the MAF sensor
5. The ECU flash for earlier models (I got mine 2013) because of the idle problems owners have been complaining about.

Any help would be greatly appreciated, folks

[BRZ868]

Whats Up mga kababayan.

[Tye300]

Originally Posted by Martinnangel

Hello, everyone!

Been a while since I last logged in here.

Anyway, I recently encountered a common problem I've seen in other threads - Idle speed fluctuation.

Even with the AC on/off, it starts from 750-800 then drops to 400-450 then foes up to 1000 and back to 750. I read that some owners had their cars stall on them, thank fully I havent encountered that yet. So I was hoping to ge some Advise from you.

By the way, I recently had a new intake installed from TB to Filter (HKS) and A full exhaust. Now, it might be the intake (vacuum leak) but im checking that tomorrow. although from other threads I've deduced, actually more of guess work haha, that it might be:

1.a vacuum leak from the air intake
2. a loose unclamped hose care of http://www.ft86club.com/forums/showt...light=vac+leak
3. the position of the air filter, air might be too hot coming in (haven't checked Intake air temp yet though)
4. the MAF sensor
5. The ECU flash for earlier models (I got mine 2013) because of the idle problems owners have been complaining about.

Any help would be greatly appreciated, folks

Do you have a tune? If it's still stock ecu, then it could be a vacuum leak. I would check for vacuum leaks first. If there is none, I would put back the stock intake and see if it would make a change. Did the idle fluctuation appear when you installed the intake?

[pcuerpo]

@Martinnangel, i also encounter this pero paminsan-minsan lang.. di nga consistent kaya ang hirap pa-check kasi minsan, normal naman takbo.. what about you? consistent ba siya and you always encounter this?

@BRZ868, back in Manila? ingat palagi boss Joel!

[alfredrey]

Hi, i've been reading this thread for quite a while.
i'll be visiting manila soon, can somebody help me..where do i find a shop to buy aftermarket parts for our 86.. parts like lowering springs, sway bars, headers, overpipe, wheel spacers, etc.

thanks,

[MFB]

Alfredrey, where are you from ? @Martinnangel how many kilometers on the odometer now?

[alfredrey]

Originally Posted by MFB

Alfredrey, where are you from ? @Martinnangel how many kilometers on the odometer now?

pinoy from dubai. just got 16k in the odo.

[keb86]

Hello guys,

I've been a subscriber to this thread since 2013 and i just got my 86 for a few weeks now so i decided to finally register, looking forward to meet and join you guys.

can i also join your FB group?

Thanks a lot!!

[pcuerpo]

@keb86, just PM @victorb, he's one of the current officers of the club, he can add you to both the open and exclusive group pages in FB

anyway, just search BRZ-86.ph, this is the open group

@alfredrey, usual shops that owners go to would be Autokozmetix (Ortigas, Pasig), Autoline (near Taft, Manila), Auto Junction, Auto Circuit, Garage One, JDM Select (QC areas).. just search them up in FB to find their contact numbers

btw, if you're looking for Cusco front strut bars w/ brake cylinder, i have a friend who has a couple of stocks arriving this week, just PM me if you're interested

[alfredrey]

pcuerpo, thank you very much! i'll be in touch

[lugao]

Musta mga kababayan? I just bought a 2015 Subaru BRZ Series.Blue not too long ago. Anyone from Colorado???

[ayuk]

good evening mga sir/mam. tanong lang, sino po naka 19's mags sa 86/brz? naglowering pa kayo? what brand of lowering spring gamit nyo? how many inch ang drop? any pictures po? thank you all.

[pcuerpo]

@ayuk, have a friend na naka 19s and lowered on H&R.. ganda ng drop, around 1", and ride is okay daw.. not sure if i can post the pic thou hehe