|
||||||
| Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
 |
|
|
Thread Tools | Search this Thread |
03-09-2015, 04:44 PM
|
#1 |
|
Senior Member
Join Date: Jul 2012
Drives: Your Car
Location: San Diego
Posts: 439
Thanks: 461
Thanked 225 Times in 115 Posts
Mentioned: 5 Post(s)
|
Toe Arms and Camber
Hello ft86club.
My current set-up is Fortune Auto coils with camber plates and OEM crash bolts for the front and otherwise stock suspension. I am currently at -2.6degrees front camber and -2.3degrees rear camber. I am currently at looking at purchasing PBM rear lower control arms to reduce my rear camber. I am aiming for -2deg front and -1.5deg rear. Will I be able to attain this geometry while still using the OEM toe arms with 0deg toe or will aftermarket toe arms be necessary? Car is 98% daily driver. Thank you!
__________________
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| *FREE alignment* with Purchase and install of Front Camber / SPL Rear Camber Arms! | Corner3garage | Southern California | 188 | 04-24-2015 01:10 PM |
| *FREE alignment* When you get Front Camber Bolts and Rear Camber Arms Installed! | Corner3garage | Mechanical Maintenance and Tools | 6 | 10-31-2013 03:40 PM |
| SPC Lower control camber arms so cheap? | SliverBrz | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 4 | 08-17-2013 08:33 PM |
| Adjustable Camber Arms vs. Whiteline Camber Bushings | digital_assassin | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 70 | 06-02-2013 06:06 AM |
| Camber arms? | skoodge | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 16 | 06-24-2012 10:09 PM |
