Official OpenFlash Tablet FA20 Tuning Tech Discussion Thread

[OmarYasin]

@shiv@openflash
American Touge - EG6 Surprise! - Hot Version International: [ame]http://youtu.be/_EoiRW1hB-4[/ame]

[Shiv@Openflash]

Originally Posted by JMPeach

Hey guys I have a quick question about data logging. I have my OFH + OFT all installed and I took a log so that I could post it on here to have it checked out. I downloaded the log from my tablet but it's saving as a ".prolog" instead of a ".csv", is there a step I'm missing to convert the file into a ".csv"? I have the Vishnu Analysis viewer as well as a datazip.me account and neither will let me open the ".prolog" file. Thanks for any help you can offer.

Looks like you downloaded the user log (.prolog) with is used for debugging purposes. To download a datalog, you need to go to Datalogging section in OpenFlash Manager. That will generate the datalog file (.csv)

[diBreezy]

Just got my OFT in the mail and am super excited to get this thing installed!

Quick question.... Umm....

Is this not Mac compatible? FML

[diBreezy]

MAJOR MALFUNCTION!

So plugged it in with car on ACC, then started engine.

Went to Tuning, Selected Toyota (I drive a Scion), attempted to "Read" and received the following error - "An error occured while reading data from DME. Please try again."

Side note: Occurred is spelled with two r's. There is a spelling error in the program

Useful information for Shiv:
OpenFlash Type: Professional
Serial Number: PM me
HW version: 0100
SW version: 0132
Special function: VIN not locked

I drive a 2013 Scion FRS.
Now my CEL is on. How do we fix this?

[phrosty]

Originally Posted by diBreezy

Now my CEL is on. How do we fix this?

CEL is probably the normal one that occurs occasionally when reading AT cars. If so it'll go away and no big deal.

[diBreezy]

Originally Posted by JMPeach

I'm no expert as I just flashed my ecu, but one thing that sticks out from what you said is you turned on the engine before reading the ecu. You should only turn the key to where the power comes on, you don't want to start the car while reading or writing tunes.

check out this video if you haven't already

Am I crazy or is Step 1 of that video: Turn the ignition to ON? Lol

[phrosty]

Originally Posted by diBreezy

Am I crazy or is Step 1 of that video: Turn the ignition to ON? Lol

Ignition Power, but yea. I've always thought it was very confusing.

[Akari]

Originally Posted by diBreezy

Am I crazy or is Step 1 of that video: Turn the ignition to ON? Lol

On doesn't mean start, it means on. The car needs to be on so you can communicate with the ECU.

[steve99]

Never start or try to start engine while reading or writing a rom with any flashing device !

[diBreezy]

OK great. Am I going to need to update the software on the OFT before I can use it? Shiv I could really use some help here. I don't own a Windows and neither do any of my friends.

[diBreezy]

Also CELL is gone

[diBreezy]

I would love to test this thing out tonight. Anyone with knowledge would be greatly appreciated.

[steve99]

Originally Posted by diBreezy

OK great. Am I going to need to update the software on the OFT before I can use it? Shiv I could really use some help here. I don't own a Windows and neither do any of my friends.

The oft will auto generate tunes for most popular roms, not sure what rom calid you guys run in columbia but if its samke as usa canada you will be fine and not update necessary.

if you read your stock rom and oft generates tunes your good to go, if it comes up with an error like cannot generate tune or something about modfile not found then you are going to need to download your tune from the openflash site and connect oft to computer. the openflash guys run macs so it can be dome with parallels vmware or similar, sorry i am not a mac user.
have a read of the OFT TIPSlink below

[momo3605]

Originally Posted by steve99

The oft will auto generate tunes for most popular roms, not sure what rom calid you guys run in columbia but if its samke as usa canada you will be fine and not update necessary.

if you read your stock rom and oft generates tunes your good to go, if it comes up with an error like cannot generate tune or something about modfile not found then you are going to need to download your tune from the openflash site and connect oft to computer. the openflash guys run macs so it can be dome with parallels vmware or similar, sorry i am not a mac user.
have a read of the OFT TIPSlink below

Just got my OFT on Friday! Are the loaded tunes on the OFT v.2.0? Or do I have to upgrade to them