WHAT DID YOU DO TO YOUR BRZ TODAY?

[scottxnizzle]

Originally Posted by brz604

Gurney flap installed.

Next up, front lip.

Where did you get it? if you don't mind sharing lol

[brz604]

Originally Posted by scottxnizzle

Where did you get it? if you don't mind sharing lol

got it from Japanparts.com, link to product here: https://www.japanparts.com/parts/detail/42113

instructions say you need to drill holes but I just used the double sided tape that was part of the flap. Cleaned the wing and just stuck it on, cut the included tabs and placed them into the holes. It feels pretty solid.

[B-R-Z]

I thought about mounting my amps under the rear deck so I removed the rear deck cover to get an idea of how to secure it. Before putting it back on I decided to clean my back window before reinstalling the third brake light.

In my closet I store my car related products (cleaners etc) during the winter to keep them from freezing. I go in my closet and grabbed the can that I thought was cleaner. I was kinda in a rush and grabbed the can that i thought looked like my cleaner. I spray it onto the window and its real gunky and dried immediately, I'm like wtf so I check the can and its my SPRAY ADHESIVE. I almost cried.. I grabbed windex and let it sit, I then used the back side of a kitchen sponge and it luckily came off after some scrubbing. The window is tinted and I thought it was a $100 mistake.

[DGMlJDlBRZ]

Originally Posted by brz604

Gurney flap installed.

Next up, front lip.

Nice. Looks good

Mine just reached LAX. Can't wait for it to reach my mailbox.

[Turkish]

It's been a while since I have posted here, but I did a lot over the last two days.

1) Raceseng Cascam top mounts installed
2) RacerX rear LCAs (which OE style bushing)
3) RCE front and rear hollow sway bars (both on softer setting at first)
4) Whiteline adjustable endlinks for the front sway bar (one rear endlink would not fit inside the RacerX control arms, but the other would.. using OE rear toelinks until I decide on a plan B).

I will hopefully have pics up tomorrow (too exhausted to go back out there right now lol)

[hanabie]

Installed carbon fiber sti style and side skirts with winglets. Thoughts?

[meWant]

Smoked out my tails with some PlastiDip... yeah I know not the greatest, but it looks nice. maybe it'll help me decide if I want to smoke out the tails later or not or have an overlay

[brz604]

Originally Posted by hanabie

Installed carbon fiber sti style and side skirts with winglets. Thoughts?

Looks sweet!

[wtrxprs007]

Originally Posted by hanabie

Installed carbon fiber sti style and side skirts with winglets. Thoughts?

Looks awesome mate! And omg that purple hue that colour has

[BlackMonarch]

And this

[scottxnizzle]

Originally Posted by brz604

got it from Japanparts.com, link to product here: https://www.japanparts.com/parts/detail/42113

instructions say you need to drill holes but I just used the double sided tape that was part of the flap. Cleaned the wing and just stuck it on, cut the included tabs and placed them into the holes. It feels pretty solid.

I was hoping it was on another website and cheaper lol.

[brz604]

Originally Posted by scottxnizzle

I was hoping it was on another website and cheaper lol.

unfortunately no.. I'm surprised there hasn't been a knockoff made for this yet.

[chanomatik]

Originally Posted by brz604

got it from Japanparts.com, link to product here: https://www.japanparts.com/parts/detail/42113

instructions say you need to drill holes but I just used the double sided tape that was part of the flap. Cleaned the wing and just stuck it on, cut the included tabs and placed them into the holes. It feels pretty solid.

Mine gets regular winter abuse and I installed the exact same way. Still solid as a rock. 3M is fairly strong stuff. Just gotta make sure it's applied to a clean surface and you're good to go!

Edit: Realized I hadn't shared my progress recently. I purchased replacement taillight gaskets from www.gasketninja.com. Shipped fairly quick! Also ordered new fender marker light bulbs because the LED ones I have now have been blinking since I pretty much got them two years ago, but I'm only now doing something about it. Also finally cleaning up my room and I found my 3 aluminum STI logo badges to put on my side skirts and front lip! I refused to pay $45 for them again, hoping I'd find them one day, and I did!

Here are some recent pics I took after going for a drive on Sunday. I purchased Adobe Lightroom to help pump up my shots a little and fix the white balance.

(this one isn't from Sunday)


(these are from Sunday)

[Porcupint]

Installed my rexpeed polarized, wide angle, heated mirrors. I'll never go back. Can see all the things and absolutely no glare anymore.