Show off your interior!

[inertia]

Out of all these pictures no one has aftermarket gauges installed?

[Efferalgan]

Originally Posted by inertia

Out of all these pictures no one has aftermarket gauges installed?

Here is mine Defi 3-DIN

[xITSxTHExPOPEx]

Originally Posted by inertia

Out of all these pictures no one has aftermarket gauges installed?

Thats what Torque is for

[Jive Turkey]

Originally Posted by inertia

Out of all these pictures no one has aftermarket gauges installed?

you're kidding right?

Originally Posted by Jive Turkey

alcantara everything. RS pull straps. Button relocation. made my own gauge pod (currently being developed further). more stuff to come.

http://www.ft86club.com/forums/showthread.php?t=41877

[BboyKidKoda]

Originally Posted by NigelA

sorry for the phone quality. car is still in winter mode. Buddyclub seat will be in next week

That's a dirty ass floor haha. Nice tho 😂


Be original don't copy!

[904FRSlow]

Here's mine

[inertia]

Originally Posted by 904FRSlow

Here's mine

Any closeup pictures of the carbon fiber?

Originally Posted by xITSxTHExPOPEx

Thats what torque is for

[904FRSlow]

Originally Posted by inertia

Any closeup pictures of the carbon fiber?

I'll take one later. I used 3M 1080 CF12 wrap

[Turbowned]

Here's mine. For anyone who doesn't like the red stitching, JPM Coachworks can use any color leather or Alcantara and any color thread to make your interior however you like. I was very tempted to go with a desert beige or saddle brown interior but the cost of reupholstering the seats was prohibitive. You could of course always change the seats or get some of those nice covers on the market.




Euro market BRZ floor mats:


OEM armrest reupholstered in leather, center console in Alcantara:


Kneepads, door panel trim reupholstered in leather, speaker panels in Alcantara:



OEM steering wheel reupholstered in smooth high-end leather (they can do perforated too, I chose not to):


Headliner, sunvisors, A and B pillar trim in Alcantara:


Many black plastic trim pieces painted piano black. Painted silver trim was repainted professionally and clear coat added for higher quality finish:




Still have a couple things left to do. I want to repaint the silver trim pieces on a black base coat so they look more like chrome. Also want to paint the trim ring around the Engine Start button to match. Want to wrap the rear deck shelf in Alcantara and do the perforated door panel sections in perforated Alcantara. Then maybe I can call it quits

[Kiske]

Still need to work on matching the silver wheel trim to the BRZ Ts gunmetal/black color... probably won't get to it until next year

Also still need to do a little sound matting for the door rattles and a tiny bit for road noise.

Really like this angle. Almost like I get to drive it!

[mmmcambelsoup]

[Quentin]

Originally Posted by Turbowned

Many black plastic trim pieces painted piano black. Painted silver trim was repainted professionally and clear coat added for higher quality finish:




Still have a couple things left to do. I want to repaint the silver trim pieces on a black base coat so they look more like chrome. Also want to paint the trim ring around the Engine Start button to match. Want to wrap the rear deck shelf in Alcantara and do the perforated door panel sections in perforated Alcantara. Then maybe I can call it quits

The piano black looks awesome. I might have to copy that.

[Turbowned]

You should! It adds a touch of class for short money.

Originally Posted by Quentin

The piano black looks awesome. I might have to copy that.

[nevin86]

Also just did the side vents and door handles in black, don't have any pics of those.