WHAT DID YOU DO TO YOUR FRS TODAY?

[dreamingat30fps]

Originally Posted by gutbomb

In a moment of insanity I considered trading it in for a E90 335xi until the test drive. It just wasn't as fun as the FR-S.

You cant compare the two. I had an E92 335i and it was a cow compared to the FRS. Personally if I had to go with a BMW I would get a 128i (yes 128, not 135) sport with the 6spd. If you are willing to go a little older and deal with the maintenance I would do an E46 M3.

Or you could just stick with the FRS.

[Tcoat]

Originally Posted by Defuser

Question for anyone who has painted their tails in the past (VHT products);

How long does it last? Does the finish fade/chip etc.? (assuming it is done properly of course)

I am leaning toward redding-out the my tail lights.

Did the lights on my Talon. They still looked as good as the day I did them after 6 years. I would think you would have the same results now.

[WallsAndFoundations]

Originally Posted by Tcoat

And...how do you like them?Pics?
I have been thinking of the black for mine actually.

Here ya go boss: http://imgur.com/3fDCVCR,6RY7nhn,R3e...WaIprp,WNLaD3H

I really really like them. While a tad heavier because of more rubber, they're a lot stickier and you can feel it grabbing the road SO much better than the stock primacies. The wheels themselves are lighter than stock by about a pound each too which is nice.

As you can see by the pics, I need to grab some coils and an extended fender for the front because of the poke. But she needs some more low, a tad bit of camber, and a bit more fender clearance for the front

[x1UP]

Originally Posted by WallsAndFoundations

Here ya go boss: http://imgur.com/3fDCVCR,6RY7nhn,R3e...WaIprp,WNLaD3H

I really really like them. While a tad heavier because of more rubber, they're a lot stickier and you can feel it grabbing the road SO much better than the stock primacies. The wheels themselves are lighter than stock by about a pound each too which is nice.

As you can see by the pics, I need to grab some coils and an extended fender for the front because of the poke. But she needs some more low, a tad bit of camber, and a bit more fender clearance for the front

Are you on everything stock suspension wise?

This was what I was asking for earlier and it looks really clean on yours. Really want the Michelin PS3s on 245/45/17s. Or if anything, 235s.

[Tcoat]

Originally Posted by WallsAndFoundations

Here ya go boss: http://imgur.com/3fDCVCR,6RY7nhn,R3e...WaIprp,WNLaD3H

I really really like them. While a tad heavier because of more rubber, they're a lot stickier and you can feel it grabbing the road SO much better than the stock primacies. The wheels themselves are lighter than stock by about a pound each too which is nice.

As you can see by the pics, I need to grab some coils and an extended fender for the front because of the poke. But she needs some more low, a tad bit of camber, and a bit more fender clearance for the front

Thank you kind sir! I am now convinced that is the way to go as they would rock the Lava. May not go as wide and will have to do something about those center caps but they are exactly what I wanted

[WallsAndFoundations]

Originally Posted by Tcoat

Thank you kind sir! I am now convinced that is the way to go as they would rock the Lava. May not go as wide and will have to do something about those center caps but they are exactly what I wanted

Youre welcome! and Aww, but if you go wide then you get concave! Either way I know you'll love it dude. It'll look great on the lava. The Center caps come with the wheels but are not pre-installed so if you don't like them, you can always leave them off and grab something you like better!

[fatalelement]

did this front and back and took the frs emblem off to wait for my incoming gt86 one

Sent from my HTC One_M8 using Tapatalk

[eddieflyinv]

Yesterday I finished blacking out my headlights and signal reflectors,
And today I changed my oil and while it was draining installed NST pulleys 😉

[BlackMonarch]

Ordered a TopSpeed over-pipe and down pipe. Awaiting arrival of those, and a Racesing reverse lockout in adonized red.

[AeroToy]

I did a couple donuts!

http://furesund.net/donut.mp4

[Young_makaveli]

Today I filled up my frs with gas and I never really thought about this til now ...

On my 300zx I would always hear a "pshhh" sound when opening the gas cap but with the frs I never hear that noise.. do you guys hear that noise when opening your gas cap or is it quiet like mines ?

[Number10]

Yesterday I washed, clayed, polished, and waxed. Also installed JDM clear side markers and the mod kit from @projek_01 that lets the HIDs and DRL strip function simultaneously. Last week I installed the Diode Dynamics tail-to-turn mod that also converts the old turn signals to backup lights. Just gotta de-pin the blue light from my 10 Series badges (I like the white one) and that'll put an end to my cosmetic mods for a while, nothing else I'm really itching for. Will update thread when I get the fix-it ticket for not having amber side marker bulbs... but I did drive by and alongside plenty of cops last night without issue so we'll see.



Silver Ignition is still so beautiful to see at the different angles


Dat reflection

[Tcoat]

Originally Posted by Young_makaveli

Today I filled up my frs with gas and I never really thought about this til now ...

On my 300zx I would always hear a "pshhh" sound when opening the gas cap but with the frs I never hear that noise.. do you guys hear that noise when opening your gas cap or is it quiet like mines ?

All is good.

[Young_makaveli]

Originally Posted by Tcoat

All is good.

So no "pshhh" is good ? Lol