KWV3 + Stock Wheels

[Knshro13]

looks good. japanese manufactures need to start making more cars look like audis and bmws stock wheel fitment.

[scottxnizzle]

Ill try to take more pics! Thanks guys

[scottxnizzle]

Here's more pictures guys, sorry for the shitty angles.

[BRZFern]

How low are you? I installed my kwv3's without adjusting the ride height then found out they were set from the factory to be lower than the designated safe-zone (20mm - 50mm) for packaging purposes. I cracked the dust cover, or whatever it's called, during my test drive after install. Your ride sits just like mine before I raised the car to a safe height.

[scottxnizzle]

Originally Posted by BRZ_Fern

How low are you? I installed my kwv3's without adjusting the ride height then found out they were set from the factory to be lower than the designated safe-zone (20mm - 50mm) for packaging purposes. I cracked the dust cover, or whatever it's called, during my test drive after install. Your ride sits just like mine before I raised the car to a safe height.

Dust cover? im not sure what part youre talking about

I never measured it, I actually bought them used and just installed them to whatever the height the prevoius owner set them to. But the back is a 1 finger gap and the front is like half a finger gap. I've been meaning the adjust the height.

[BRZFern]

Originally Posted by scottxnizzle

Dust cover? im not sure what part youre talking about

I never measured it, I actually bought them used and just installed them to whatever the height the prevoius owner set them to. But the back is a 1 finger gap and the front is like half a finger gap. I've been meaning the adjust the height.

Here's a pic of another member's cracked dust cap. It's the black cover below the bump stops.

[scottxnizzle]

Originally Posted by BRZ_Fern

Here's a pic of another member's cracked dust cap. It's the black cover below the bump stops.

Mine don't have that on there lol The previous owner must have taken them off.